SF2219A MURATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

www.RFM.com E-mail: info@rfm.com Page 1 of 4 ©2010 by RF Monolithics, Inc. SF2219A - 11/10/10 Electrical Specifications Characteristic Sym Notes Min Typ Max Units Nominal Center Frequency fC

193.6 MHz

Passband: Minimum Insertion Loss, 193.5 to 193.7 MHz 8.0 9.0 dB 1.5 dB Bandwidth BW 1.5 1, 2 390 440 kHz Amplitude Ripple , 193.5 to 193.7 MHz 0.5 1.0 dBP-P Group Delay Variation, 193.405 to 193.795 MHz GDV 1000 1500 nsP-P Absolute Delay at 193.6 MHz AGD 1700 1900 2100 ns Rejection: 1, 2, 3 dB 193.1 and 194.1 MHz 25 27 188.0 and 198.0 MHz 42 45 Ultimate Rejection, <184 MHz, >203 MHz 45 50 Operating Temperature Range T A 10 + 7 0 ° C

  • Low Insertion Loss  Excellent Size-to-Performance Ratio  Hermetic SMP-53-S Surface-mount Case  Single-ended Input and Output  Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +18 dBm Maximum DC Voltage on any Non-ground Terminal 30 VDC Storage Temperature Range in Tape and Reel -40 to +85 °C Suitable for Lead-free Soldering - Maximum Soldering Profile 260°C for 30 s
  1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depe ndent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. The turnover temperature, T O, is the temperature of maximum (or turnover) frequency, fo. The nominal frequency at any case temperature, Tc, may be calculated from: f=fo[1-FTC(To-Tc)2]. 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. Impedance Matching to 50 Ω Single-ended Source and Load External L-C Case Style SM1154-14, 11.5 x 4 mm Nominal Footprint Lid Symbolization (YY = year, WW = week) SF2219A, YYWW Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: Preliminary SM1154-14

www.RFM.com E-mail: info@rfm.com Page 2 of 4 ©2010 by RF Monolithics, Inc. SF2219A - 11/10/10 Frequency Respose Plots CH1 S11 1 U FS CE NTR 19 3 . 6 00 M Hz SP A N 2 . 00 0 M Hz Co r CH2 S21 L OG 10 d B/ REF -7 .539 dB CENTER 1 93 . 60 0 000 MHz SPAN 12 . 00 0 00 0 MHz Co r CH3 S2 2 1 U FS CEN TR 1 93 . 6 00 M Hz S PA N 2 . 0 00 M Hz Cor

9 Nov 2010 13:47:33

1: 5 6 . 9 6 7 -9 . 1465 89 . 87 9 pF 19 3 . 600 000 MHz 23 4 1 : 0 . 00 00 dB 0 . 000 0 00 MHz REF= 1 CH2 Marke rs BW: . 42 4013 MHz ce nt : 193 . 6 027 53 MHz Q: 45 6 . 60 1_ loss : -7 . 54 26 d B 1 : 57 . 705 -3 . 1699 259 . 34 pF 193 . 600 0 00 M Hz SF221 9A Full Re sp

www.RFM.com E-mail: info@rfm.com Page 3 of 4 ©2010 by RF Monolithics, Inc. SF2219A - 11/10/10 B A TOP VIEW BOTTOM VIEW G Case Dimensions Dimension mm Inches Min Nom Max Min Nom Max E 0.76 0.030 F 1.27 0.050 G 1.27 0.050 H 0.1 0.004 Electrical Connections Connection Terminals Input 2 Input Return 13 Output 9 Output Return 6 Ground All Others Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free SM1154-14 Ceramic Surface-mount 14-Terminal Case 11.5 x 4.0 mm Nominal Footprint B A C D H E F G 0.034 TYP. (0.86) 0.050 (1.27) TYP. 0.067 TYP. (1.70) 0.190 (4.84) 0.334 REF. (8.48) Recommended PCB Footprint

www.RFM.com E-mail: info@rfm.com Page 4 of 4 ©2010 by RF Monolithics, Inc. SF2219A - 11/10/10 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 4.55 mm ±0.1 Bo 12.04 mm ±0.1 Ko 2.13 mm ±0.1 Pitch 8.00 mm ±0.1 W 24.00 mm ±0.3 W (CARRIER TAPE SIZE) AO BO P (PITCH) COVER TAPE SIZE KO COVER TAPE 1.5 mm +0.1 -0.0 4.0 mm ±0.1 2.0 mm ±0.1 1.75 mm ±0.1 1.5 mm +0.3 -0.0 PIN #1 USER DIRECTION OF FEED