DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2015 SF2150E (R) 8/17/16 Page 1 of 5 www.murata.com
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units Center Frequency fC 915 MHz Insertion Loss, 910 to 920 MHz IL 3.0 3.7 dB Amplitude Ripple, 910 to 920 MHz 0.8 1.7 dBP-P Attenuation, Referenced to 0 dB DC to 880 MHz 45 50 dB 880 to 890 MHz 40 52 940 to 950 MHz 35 40 950 to 1200 MHz 43 48 1200 to 1600 MHz 40 48 1600 to 2200 MHz 30 43 2200 to 2500 MHz 25 35 2500 to 3000 MHz 20 27 Source Impedance ZS 50 Load Impedance ZL 50 Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator A44, YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel SM3030-6
- 915 MHz Low-loss SAW Filter
- Surface Mount 3.0 x 3.0 mm Package
- Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Input Power Level 10 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +60 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Solder Reflow Temperature, 10 seconds, 5 cycles maximum 260 °C
915 MHz
- Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depe ndent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototype s." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2015
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2015 SF2150E (R) 8/17/16 Page 2 of 5 www.murata.com Filter Response Plots Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2015
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2015 SF2150E (R) 8/17/16 Page 3 of 5 www.murata.com VSWR Plots Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2015
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2015 SF2150E (R) 8/17/16 Page 4 of 5 www.murata.com A BC D J EF GH I A44 YWWS SM3030-6 Case TOP VIEW BOTTOM VIEW /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Case and PCB Footprint Dimensions Case Materials Dimension mm Inches Min Nom Max Min Nom Max K 3.20 0.126 L 1.70 0.067 M 1.05 0.041 N 0.81 0.032 O 0.38 0.015 Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Land Pattern /G35 /G30 /G20 /G6F /G68 /G6D /G35 /G30 /G20 /G6F /G68 /G6D /G32 /G35 /G31 /G2C /G20 /G33 /G2C /G20 /G34 /G2C /G20 /G36 Electrical Connections Connection Terminals Input 2 Output 5 Ground All Others Top View SF2150E Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2015
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2015 SF2150E (R) 8/17/16 Page 5 of 5 www.murata.com Tape and Reel Specifications “B” Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W1 2.0 mm RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch BB A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED /G32 /G30 /G2E /G32 /G31 /G33 /G2E /G30 /G32 /G2E /G30 /G31 /G30 /G30 /G20 /G52 /G45 /G46 /G2E /G22 /G42 /G22 /G20 /G52 /G45 /G46 /G2E /G48 /G75 /G62 /G20 /G44 /G65 /G74 /G61 /G69 /G6C /G31 /G32 /G2E /G30 /G44 /G69 /G6D /G65 /G6E /G73 /G69 /G6F /G6E /G73 /G20 /G69 /G6E /G20 /G6D /G6D Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2015