SF2149A MURATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
www.RFM.com E-mail: info@rfm.com Page 1 of 4 ©2008 by RF Monolithics, Inc. SF2149A - 1/11/11
Electrical Characteristics
Characteristic Sym Notes Min Typ Max Units Nominal Center Frequency fN 1 46.08 MHz Passband bandwidth BW 5M H z 1, 2,3 81 0 dB Relative Attenuation to IL @ 30 ... 41.98 MHz 20 25 out of pass band (Rejection) 61.44 MHz 40 45 <30 MHz &>76.8 MHz 40 45 Input IP3 35 40 dBm Operating Temperature -40 +85 °C Terminating impedance 50 Ohm Case Style SM13365-12 13.3 x 6.5 mm Nominal Footprint Lid Symbolization (YY = year, WW = week, S=shift) See note 4 RFM SF2149A // YYWWS
- TD-SCDMA SAW Filter, 46.08 MHz, 5 MHz BW
- Low Insertion Loss
- 13.3 x 6.5 x 1.9 mm Surface-mount Case
- Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +10 dBm Max. DC voltage between any 2 terminals 30 VDC Storage Temperature Range -40 to +85 °C Suitable for lead-free soldering - Max. Soldering Profile 260°C for 10 s
46.08 MHz
- Unless noted otherwise, all specifications apply over the operating tem- perature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network ana- lyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. Part to part absolute delay measurement records the absolute delay mean across 1 dB passband. 5. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes.” 6. The design, manufacturing process, and specifications of this filter are subject to change. 7. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 8. US and international patents may apply. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes:
www.RFM.com E-mail: info@rfm.com Page 2 of 4 ©2008 by RF Monolithics, Inc. SF2149A - 1/11/11 Materials Solder Pad Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80-200 uInches (203-508 uM) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phos- phorus) 100-200 uInches Thick Body Al 2O3 Ceramic Pb Free Case Dimensions Dimension mm Inches Min Nom Max Min Nom Max C 1.91 2.00 0.075 0.079 D 1.50 0.059 E 0.79 0.031 H 1.0 0.039 P 2.54 0.100 Electrical Connections Connection Terminals Port 1 Input or Return 2 Return or Input 3 Port 2 Output or Return 8 Return or Output 9 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot C H P (8 Places) E (10 Places) DB A 9 8 TOP VIEW BOTTOM VIEW 8 9 SM13365-12 Case 12-Terminal Ceramic Surface-Mount Case 13.3 x 6.5 mm Nominal Footprint
www.RFM.com E-mail: info@rfm.com Page 3 of 4 ©2008 by RF Monolithics, Inc. SF2149A - 1/11/11 Testing Environment Frequency Response
www.RFM.com E-mail: info@rfm.com Page 4 of 4 ©2008 by RF Monolithics, Inc. SF2149A - 1/11/11