DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

©2010-2014 by Murata Electronics N.A., Inc. SF2136E (R) 4/8/14 Page 1 of 5 www.murata.com

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units Center Frequency fC 433.92 MHz 3 dB Bandwidth 5M Hz Insertion Loss, 433.05 to 434.79 MHz IL 2.0 3.3 dB Amplitude Ripple, p-p, 433.05 to 434.79 MHz 0.3 1.5 Attenuation Referenced to 0 dB: 389.0 to 392.0 MHz 42 54 411.0 to 414.0 MHz 40 50 454.0 to 457.0 MHz 40 51 475.0 to 478.5 MHz 42 52 863.0 to 870.0 MHz 41 35 Source Impedance ZS 50 Ω Load Impedance ZL 50 Ω Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization, Y=year, WW=week, S=shift, Dot=pin 1 indicator 682, YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel R eel Size 13 Inch 3000 Pieces/Reel Electrical Connections Connection Terminals Input 2 Output 5 Case Ground All others SM3030-6

  • Steep Roll-off Filter for 433.92 MHz Unlicensed Band
  • No Matching Required for Operation in 50Ω Environment
  • Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Input Power Level 10 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Maximum Soldering Profile, 5 Cycles/10 seconds Maximum 265 °C

433.92 MHz

  1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depen dent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. The design, manufacturing process, and specifications of this filter are subject to change. 5. US and international patents may apply. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2007

©2010-2014 by Murata Electronics N.A., Inc. SF2136E (R) 4/8/14 Page 2 of 5 www.murata.com SF2136E Frequency Response Plots CH1 S2 1 LO G 10 d B/ RE F -40 dB CENTER 433 . 920 000 MHz S PAN 100 . 000 000 MHz

15 Oct 2010 22:56:43

5 : -51 . 17 0 dB 4 54 . 000 000 MHz CH1 Mark ers 1: - 5 3 . 0 9 9 d B 389 . 000 MHz 2: - 5 2 . 8 6 8 d B 392 . 000 MHz 3: - 5 1 . 5 3 1 d B 411 . 000 MHz 4: - 4 8 . 4 0 1 d B 414 . 000 MHz sf2136e Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2007

©2010-2014 by Murata Electronics N.A., Inc. SF2136E (R) 4/8/14 Page 3 of 5 www.murata.com CH 1 S21 L OG 1 dB/ R EF - 1.0 11 dB CENTER 433 . 920 000 MHz SPAN 10 . 000 000 MHz C

15 Oct 2010 22:59:11

2 :- . 06 77 0 d B 1 . 7 40 0 0 0 MHz REF=1 CH1 Markers me a n : -1 . 73 39 dB s . dev : . 042 40 dB p-p : . 16 000 d B sf2136 e RIPPL E Resp Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2007

©2010-2014 by Murata Electronics N.A., Inc. SF2136E (R) 4/8/14 Page 4 of 5 www.murata.com /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint SM3030-6 Case Top View Bottom View Case and PCB Footprint Dimensions Case Materials Dimension mm Inches Min Nom Max Min Nom Max K 3.20 0.126 L 1.70 0.067 M 1.05 0.041 N 0.81 0.032 O 0.38 0.015 Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free PCB Footprint Top View A BC D J EF GH I 682 YWWS Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2007

©2010-2014 by Murata Electronics N.A., Inc. SF2136E (R) 4/8/14 Page 5 of 5 www.murata.com Tape and Reel Specifications “B“ Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch BB A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2007