SF2134E | DigiCamel IC Datasheet

Online Datasheet

Read SF2134E online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 5

Technical content

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units Center Frequency fC 897.5 MHz Insertion Loss, 880 to 915 MHz IL 2.1 3.0 dB Amplitude Ripple, 880 to 915 MHz 1.0 2.0 dBP-P Attenuation Referenced to 0 dB dB DC to 860 MHz 17 19 925 to 935 MHz 5 12.4 935 to 960 MHz 20 24 980 to 2000 MHz 20 22 VSWR, 880 to 915 MHz 2:1 2.6:1 Source Impedance ZS 50 Ω Load Impedance ZL 50 Ω Case Style SM3030-6 3.0 x 3.0 mm Nominal Footprint Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator 674, YWWS Standard Reel Quantity Reel Size 7 Inch 500 Pieces/Reel Reel Size 13 Inch 3000 Pieces/Reel Connection Terminals Input 2 Output 5 Case Ground All others SM3030-6

Low-loss UHF SAW Filter
Surface Mount 3.0 x 3.0 mm Package
Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Value Units Input Power Level 5 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -20 to +75 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Suitable for Lead-free Soldering - Maximum Soldering Profile 260 °C for 30 s

897.50 MHz

Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is depe ndent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototype s." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. Pb CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2007

©2010-2014 by Murata Electronics N.A., Inc. SF2134E (R) 4/8/14 Page 4 of 5 www.murata.com SM3030-6 Case 6-Terminal Ceramic Surface-Mount Case 3.0 X 3.0 mm Nominal Footprint Top View Bottom View A BC D J EF GH I 674 YWWS /G4B /G4B /G4F /G4D /G4D /G4E /G4E /G4E /G4C PCB Footprint Top View Case and PCB Footprint Dimensions Case Materials Dimension mm Inches Min Nom Max Min Nom Max K 3.20 0.126 L 1.70 0.067 M 1.05 0.041 N 0.81 0.032 O 0.38 0.015 Materials Solder Pad Plating 0.3 to 1.0 µm Gold over 1.27 to 8.89 µm Nickel Lid Plating 2.0 to 3.0 µm Nickel Body Al2O3 Ceramic Pb Free Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2007

©2010-2014 by Murata Electronics N.A., Inc. SF2134E (R) 4/8/14 Page 5 of 5 www.murata.com Tape and Reel Specifications “B” Quantity Per Reel Inches millimeters 7 178 500 13 330 3000 See Detail "A" 13.0 20.22.0 12.0 100 REF. "B" REF. COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 3.35 mm Bo 3.35 mm Ko 1.40 mm Pitch 8.0 mm W 12.0 mm RO.3 (MAX.) Ko SECTION A-A 0.3 ± 0.05 SECTION B-B Bo 2.0 4.0 Ao Pitch BB A R0.5 (MAX.) A 5.5 12.0 1.75 1.5 1.50PIN #1 USER DIRECTION OF FEED 674 YWWS Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved 2007

Product Information

SF2134E specifications and overview.

Summary

Low-loss UHF SAW Filter

Description

Low-loss UHF SAW Filter

Source title SF2134E Datasheet(PDF) - Murata Manufacturing Co., Ltd.

Related Parts

More parts from the same family.

Browse manufacturer