SF0915BA02501S ICST | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

915 MHz SAW Filter

26 MHz Bandwidth

Part Number SF0915BA02501S Rev X2 23-May-05 Page 1 of 2 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx Integrated Circuit Systems, Inc.

DESCRIPTION

Miniature 915 MHz surface acoustic wave (SAW) bandpass filter in a 3.8x3.8 mm LCC package designed to be used as the RF filter in spread spectrum unlicensed band transceiver, receiver, and transmitter applications. TYPICAL PERFORMANCE MAXIMUM RATINGS Parameter Min Max Units Operating Temperature Range -10 +70 ºC Storage Temperature Range -40 +85 ºC Input Power Level 10 dBm Max. D. C. Voltage between Each Terminal 10 V SPECIFICATION Parameter Min Typ Max Units Center Frequency FC 915.0 MHz Bandwidth (3dB) 26 MHz Insertion Loss 2.8 3.3 dB Passband Amplitude Ripple 1.5 dB Stopband Rejection, 10-800 MHz 50 dB Stopband Rejection, 800-845 MHz 45 dB Stopband Rejection, 845-880 MHz 35 dB Stopband Rejection, 947-992 MHz 15 dB Stopband Rejection, 992-1020 MHz 35 dB Stopband Rejection, 1020-1200 MHz 45 dB Temperature Coefficient of Frequency - 30 ppm/°K Terminating Impedance 50 Ω// 0nF

Part Number SF0915BA02501S Rev X2 23-May-05 Page 2 of 2 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx Integrated Circuit Systems, Inc. SUGGESTED PCB FOOTPRINT 3.8 X 3.8 MM, SMP TEST CIRCUIT All specifications are believed to be accurate and reliable. However, ICS reserves the right to make changes without notice. © 2005 Integrated Circuit Systems, Inc. All rights reserved. 50 ohm single-ended No matching circuit required 1, 3, 4, 6 PIN NO. INPUT OUTPUT GROUND NOTES: DIMENSIONS IN MM PACKAGE OUTLINE AND SUGGESTED PCB FOOTPRINT