SF0150BA03095S ICST | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
150.025 MHz Filter
6.1 MHz Bandwidth
Part Number SF0150BA03095S Rev X7 15-Feb-05 Page 1 of 4 Integrated Circuit Systems • Surface Acoustic Wave Products
324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456
www.icst.com QF12/3 Integrated Circuit Systems, Inc. TYPICAL PERFORMANCE Horizontal: 2.5 MHz/div Vertical (f rom top): Magnitude 10 dB/div Magnitude 1 dB/div Group Delay Deviation 150 ns/div SPECIFICATION Parameter Min Typ Max Units All electrical specifications apply over the full -10ºC to +50ºC operating range and include allowance for all manufacturing tolerances Center Frequency FC 1 149.875 150.025 150.175 MHz 1 dB Bandwidth 2 5.7 5.95 MHz 3 dB Bandwidth 2 6.1 6.42 MHz 40 dB Bandwidth 2 7.95 8.3 MHz Stopband Rejection, 25 MHz to 135 MHz 45 54 dB Stopband Rejection, 165 MHz to 2000 MHz 45 53 dB Insertion Loss 3 19.3 21 dB Passband Amplitude Variation, FC ± 2.75 MHz 0.67 0.8 dB p-p Passband Group Delay Variation, FC ± 2.75 MHz 4 115 150 ns p-p Absolute Delay 1.81 2.0 µs Input VSWR, FC ± 2.85 MHz 4 1.2 1.8 : 1 Output VSWR, FC ± 2.85 MHz 4 1.3 1.8 : 1 Maximum Input Level 20 dBm Source and Load Impedance 50 Ω Operating Temperature Range -10 +50 ºC Storage Temperature Range -45 +85 ºC Notes: 1. Defined as the mean of the 10dB frequencies. 2. dB levels are taken to be relative to the insertion loss. 3. Measured at the maximum level (lowest insertion loss) of the response. 4. When matched as indicated on Page 3.
Part Number SF0150BA03095S Rev X7 15-Feb-05 Page 2 of 4 Integrated Circuit Systems • Surface Acoustic Wave Products www.icst.com QF12/3 Integrated Circuit Systems, Inc.
DESCRIPTION
1,2,3,4,6,7,8,9 PIN NO. INPUT OUTPUT GROUND NOTES: DIMENSIONS SHOWN ARE NOMINAL IN MILLIMETERS. ALL TOLERANCES ARE ±0.15MM EXCEPT OVERALL LENGTH AND WIDTH 13.30 6.50 10X 1.02 9X 1.802.10 1.91 7.62 1.75 MAX. +.20 -.10 +.20 -.10 BA03095S YYWWM ICS
PACKAGE INFORMATION
6.70 2.00 1.22 8.84 SUGGESTED PCB FOOTPRINT 1.91 BA03095S ESD PIN 1 YYWWM LOGO ICS THE DATE CODE CONSISTS OF: YY=YEAR, WW=WEEK, M=MANUFACTURING SITE CODE MARKING CODE 12345 10 9 8 7 6 PACKAGE AND SUGGESTED PCB FOOTPRINT MARKING Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5-1.0 um, over a 2-6 um Ni plating YYJJJM YYJJJM The date code consists of: YY = last two digits of year; JJJ = Julian day; M = manufacturing site code
Part Number SF0150BA03095S Rev X7 15-Feb-05 Page 3 of 4 Integrated Circuit Systems • Surface Acoustic Wave Products www.icst.com QF12/3 Integrated Circuit Systems, Inc. MATCHING CIRCUIT Component values in 50Ω: Rp1 = 220 Ω Ls1 = 39 nH Cp1 = 47 pF (Minimum inductor Q = 45) Rp2 = 130 Ω Ls2 = 33 nH Cp2 = 50 pF Notes: 1. Optimum values may differ from these when using a different fixture or board layout. The values shown here are intended as a guide only. 2. Required component tolerances – resistors ±5%, inductors ±2%, capacitors ±5%. MAXIMUM RATINGS Parameter Min Max Units Operating Temperature Range -10 +50 ºC Storage Temperature Range -45 +85 ºC Maximum Input Power Level 20 dBm D. C. Voltage between Each Terminal 15 V Ls1 Cp1 Rp1 Cp2 Rp2 Ls2 10 5 1,2,3,4,6,7,8,9
Part Number SF0150BA03095S Rev X7 15-Feb-05 Page 4 of 4 Integrated Circuit Systems • Surface Acoustic Wave Products www.icst.com QF12/3 Integrated Circuit Systems, Inc. PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS Parameter Qualification Conditions Life Testing High temperature bake at +85 ºC for 168 hours. Temperature Cycling MIL-STD 883, Method 1010: -40 ºC to +85 ºC, 10 cycles, 10 minutes dwell at temperature extremes Vibration MIL-STD-202, Method 201A: 10 to 55 Hz, double amplitude of 0.06” for 2 hours in each axis. Mechanical Shock MIL-STD-883, Method 2002, Test Condition B: 1500 g, 3 impacts each axis Solder Heat Resistance and Reflow Condition Peak temperature 240+/-5 ºC for 10 seconds. Pre-heat: 150-170 ºC for 60 to 90 seconds. Peak dwell: over 200 ºC for 23 to 26 seconds. Handling: Class 1 per MIL-STD-1686 Reflow Profile is shown at the bottom of this table. Lead Integrity MIL-STD 883 Method 2004, Condition D 8 oz for 30 seconds. Solderability MIL-STD-883 Method 2003: 245 ºC +/-5 ºC; 95% coverage; no steam aging Hermeticity MIL-STD 883 Method 1014: Condition A2 and Condition C (no bomb) ESD Classification Class I per MIL-STD-883 Method 3015 Precautions Do not subject devices to ultrasonic cleaning, which may cause deterioration and destruction of the device. Reflow Profile 100 150 200 250 0 50 100 150 200 250 300 TIME (sec) TEMP (deg C) ISO 9001 Registered