SDT800-F8 SOLIDSTATE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
Features
V CEO = 80V Small 8 pin SSOP package (0.050” lead pitch) Low input power consumption High stability CTR Range 20 – 320% (Binning Optional) High Isolation Voltage (3,750V RMS) Long Life / High Reliability RoHS / Pb-Free / REACH Compliant NOTE: Suffixes listed above are not included in marking on device for part number identification 3 6 8(+) Input (-) Input (+) Input Collector Emitter Collector SDT800-F8 4 5(-) Input Emitter
© 2014 Solid State Optronics • San José, CA Page 2 of 8 SDT800-F8 Rev 2.00 (03/05/2014) 001803 SDT800-F8 DC Input 80V Dual Channel Optocoupler Parameter Symbol Min. Typ. Max. Units Test Conditions Input Specifications LED Forward Voltage V F - 1.2 1.55 V I F = 10mA LED Reverse Voltage BV R 5 - - V I R = 10μA Terminal Capacitance C t - 25 - pF V=0, f=1KHz Input Reverse Current I R - 0.1 100 A VR=6V Output Specifications Collector-Emitter Voltage V CEO 80 - - V IC=10A Emitter-Collector Voltage V COE 7 - - V IE=10A Collector Dark Current I CEO - 5 50 nA V CE=10V Collector Emitter Capacitance C CE - 10 - pF V CE=0, f=1MHz Saturation Voltage V CE(sat) - 0.2 0.4 V I F=10mA, IC=2.5mA Coupled Specifications Rise Time T R - 5.0 - S IC=2mA, VCC=2V, RL=100 Fall Time T F - 4.0 - S IC=2mA, VCC=2V, RL=100 Current Transfer Ratio - A CTR 40 - 80 % I F=10mA, VCE=5V 13 - - % I F=1mA, VCE=5V - B CTR 63 - 125 % I F=10mA, VCE=5V 22 - - % I F=1mA, VCE=5V - C CTR 100 - 200 % I F=10mA, VCE=5V 34 - - % I F=1mA, VCE=5V - D CTR 160 - 320 % I F=10mA, VCE=5V 48 - - % I F=1mA, VCE=5V - E CTR 20 - - % I F=10mA, VCE=5V Isolation Specifications Isolation Voltage V ISO 3750 - - V RMS RH ≤ 50%, t=1min Input-Output Resistance R I-O - 10 - VI-O = 500VDC Electrical Characteristics, TA = 25°C (unless otherwise specified) Test Circuit: Response Time Test Circuit: Frequency Response
© 2014 Solid State Optronics • San José, CA Page 4 of 8 SDT800-F8 Rev 2.00 (03/05/2014) 001803 SDT800-F8 DC Input 80V Dual Channel Optocoupler Figure 7: Collector Dark Current (ICEO) vs. Temperature (°C) SDT800-F8 Performance & Characteristics Plots, TA = 25°C (unless otherwise specified)
© 2014 Solid State Optronics • San José, CA Page 5 of 8 SDT800-F8 Rev 2.00 (03/05/2014) 001803 SDT800-F8 DC Input 80V Dual Channel Optocoupler Process Step Description Parameter A Preheat Start Temperature (ºC) 150ºC B Preheat Finish Temperature (ºC) 180ºC C Preheat Time (s) 90 - 120s D Melting Temperature (ºC) 230ºC E Time above Melting Temperature (s) 30s F Peak Temperature, at Terminal (ºC) 260ºC G Dwell Time at Peak Temperature (s) 10s H Cool-down (ºC/s) <6ºC/s SDT800-F8 Solder Reflow Temperature Profile Recommendations (1) Infrared Reflow: Refer to the following figure as an example of an optimal temperature profile for single occurrence infrared reflow. Soldering process should not exceed temperature or time limits expressed herein. Su rface temperature of device package should not exceed 250ºC: A B C D F E G H (2) Wave Solder: (3) Hand Solder: Maximum Temperature: 260ºC (at terminal) Maximum Time: 10s Pre-heating: 100 - 150ºC (30 - 90s) Single Occurrence Maximum Temperature: 350ºC (at tip of soldering iron) Maximum Time: 3s Single Occurrence
© 2014 Solid State Optronics • San José, CA Page 6 of 8 SDT800-F8 Rev 2.00 (03/05/2014) 001803 SDT800-F8 DC Input 80V Dual Channel Optocoupler All dimensions in millimeters [mm] with inches in parenthesis ()
© 2014 Solid State Optronics • San José, CA Page 7 of 8 SDT800-F8 Rev 2.00 (03/05/2014) 001803 SDT800-F8 DC Input 80V Dual Channel Optocoupler SDT800-F8 Packaging Specifications Tape & Reel Specifications (T&R) Note: All dimensions in millimeters [mm] with inches in parenthesis () Specification Symbol Dimensions, mm ( inches ) Tape Width W 16 0.3 ( 0.63 ) Sprocket Hole Pitch P0 4 0.1 ( 0.15 ) Compartment Location F 2 0.1 ( 0.079 ) Compartment Pitch P1 12 0.1 ( 0.472 )
© 2014 Solid State Optronics • San José, CA Page 8 of 8 SDT800-F8 Rev 2.00 (03/05/2014) 001803 SDT800-F8 DC Input 80V Dual Channel Optocoupler Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notices. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO’s Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. DISCLAIMER SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. LIFE SUPPORT POLICY 800-F8 YWW Date Code Pin 1 X CTR Bin Code