SDT600-X SOLIDSTATE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

Features

  • VCEO = 60V
  • Small 6 pin DIP/SMD package
  • No Base Connection
  • Low input power consumption
  • High stability
  • CTR Range 40 – 320%
  • High Isolation Voltage (5000VRMS)
  • Long Life / High Reliability
  • RoHS / Pb-Free / REACH Compliant NOTE: Suffixes listed above are not included in marking on device for part number identification 2 5 6(+) Input (-) Input Collector Do Not Connect SDT600-X 3 4Do Not Connect Emitter © 2014 Solid State Optronics • San José, CA SDT600-X/H/S/TR Rev 2.00 (09/04/2014) 002157 Page 1 of 10

Photo-Transistor Optocoupler (No Base) Parameter Symbol Min. Typ. Max. Units Test Conditions Input Specifications LED Forward Voltage VF - 1.2 1.4 V IF = 20mA LED Reverse Voltage BVR 5 - - V IR = 10μA Terminal Capacitance Ct - 30 250 pF V=0, f=1KHz Reverse Current IR - - 10 µA VR=4V Output Specifications Collector-Emitter Voltage VCEO 60 - - V IC=10µA Emitter-Collector Voltage VCOE 6 - - V IE=10µA Collector Dark Current ICEO - - 0.1 µA VCE=20V, IF=0mA Floating Capacitance Cf - 0.6 1.0 pF V=0, f=1MHz Cut-Off Frequency fC - 80 - kHz VCE=5V, IC=2mA, RL=100Ω, -3dB Saturation Voltage VCE(sat) - 0.2 0.4 V IF=10mA, IC=2.5mA Coupled Specifications Rise Time TR - 5 - µS IC=2mA, VCC=5V, RL=100Ω Fall Time TF - 4 - µS IC=2mA, VCC=5V, RL=100Ω Current Transfer Ratio CTR 40 - 320 % IF=10mA, VCE=5V CTR Classification (BINNING) - A 40 - 80 % IF=10mA, VCE=5V - B 63 - 125 % IF=10mA, VCE=5V - C 100 - 200 % IF=10mA, VCE=5V - D 200 - 320 % IF=10mA, VCE=5V - E 40 - 320 % IF=10mA, VCE=5V Isolation Specifications Isolation Voltage VISO 5000 - - VRMS RH ≤ 50%, t=1min Input-Output Resistance RI-O - 10 - Ω VI-O = 500VDC Test Circuit: Response Time Electrical Characteristics, TA = 25°C (unless otherwise specified) Test Circuit: Frequency Response © 2014 Solid State Optronics • San José, CA Page 2 of 10 SDT600-X/H/S/TR Rev 2.00 (09/04/2014) 002157

Photo-Transistor Optocoupler (No Base) Process Step Description Parameter A Preheat Start Temperature (ºC) 150ºC B Preheat Finish Temperature (ºC) 180ºC C Preheat Time (s) 90 - 120s D Melting Temperature (ºC) 230ºC E Time above Melting Temperature (s) 30s F Peak Temperature, at Terminal (ºC) 260ºC G Dwell Time at Peak Temperature (s) 10s H Cool-down (ºC/s) <6ºC/s SDT600-X Solder Reflow Temperature Profile Recommendations (1) Infrared Reflow: Refer to the following figure as an exam ple of an optimal temperature profile for single occurrence infrared reflow. Soldering process should not exceed temperature or time limits expressed herein. Surface temperature of device package should not exceed 250ºC: A B C D F E G H (2) Wave Solder: (3) Hand Solder: Maximum Temperature: 260ºC (at terminal) Maximum Time: 10s Pre-heating: 100 - 150ºC (30 - 90s) Single Occurrence Maximum Temperature: 350ºC (at tip of soldering iron) Maximum Time: 3s Single Occurrence © 2014 Solid State Optronics • San José, CA Page 5 of 10 SDT600-X/H/S/TR Rev 2.00 (09/04/2014) 002157

Photo-Transistor Optocoupler (No Base) © 2014 Solid State Optronics • San José, CA Page 6 of 10 SDT600-X/H/S/TR Rev 2.00 (09/04/2014) 002157

Photo-Transistor Optocoupler (No Base) 6 PIN WIDE Lead Space Package (-H) Note: All dimensions in millimeters [mm] with inches in parenthesis () © 2014 Solid State Optronics • San José, CA Page 7 of 10 SDT600-X/H/S/TR Rev 2.00 (09/04/2014) 002157

Photo-Transistor Optocoupler (No Base) 6 PIN SMD Surface Mount Package (-S) Note: All dimensions in millimeters [mm] with inches in parenthesis () © 2014 Solid State Optronics • San José, CA Page 8 of 10 SDT600-X/H/S/TR Rev 2.00 (09/04/2014) 002157

Photo-Transistor Optocoupler (No Base) SDT600-X Packaging Specifications Tape & Reel Specifications (T&R) Note: All dimensions in millimeters [mm] L M N O Q R S B B1 D D1 E K P P1 T W © 2014 Solid State Optronics • San José, CA Page 9 of 10 SDT600-X/H/S/TR Rev 2.00 (09/04/2014) 002157

Photo-Transistor Optocoupler (No Base) Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notices. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO’s Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. DISCLAIMER SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. LIFE SUPPORT POLICY SDT600 YWW Date Code Pin 1 X(A-E) “X” is Part Numbering (A-E) is CTR Binning © 2014 Solid State Optronics • San José, CA Page 10 of 10 SDT600-X/H/S/TR Rev 2.00 (09/04/2014) 002157