SDS6011 SOLIDSTATE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
Features
High data date – 1MHz (NRZ) Free from latch up and oscillation Microprocessor compatible Drive Logic compatible output sinks 16mA @ 0.4V Guaranteed on/off threshold hysteresis High common mode rejection ratio Fast switching (100nS typical t R and tF) Wide supply voltage compatibility NOTE: Suffixes listed above are not included in marking on device for part number identification 3 4 Do Not Connect Anode Cathode VO Ground VCC SDS6011
© 2013 Solid State Optronics • San José, CA Page 2 of 8 SDS6011 H/S/TR Rev 1.00 (10/31/2013) 001664 SDS6011 DC Input 1MHz Schmitt Trigger Optocoupler Parameter Symbol Min. Typ. Max. Units Test Conditions Input Specifications LED Forward Voltage VF - 1.2 1.5 V I F = 10mA 0.75 0.95 - V I F = 0.3mA LED Reverse Voltage BV R 5 - - V I R = 10μA Terminal Capacitance C t - 50 - pF V=0, f=1KHz Reverse Current I R - - 10 A VR=5V Output Specifications Operating Voltage V CC 3 - 15 V - Supply Current I CC(OFF) - - 3 mA I F=0mA, VCC=5V Output Current, High I OH - - 100 A IF=0mA, VCC=VO=15V Coupled Specifications Supply Current I CC(ON) - 1.6 5 mA IF=IF(on), VCC=5V Output Voltage, Low V OL - 0.2 0.4 V IF=IF(on), RL=270Ω, VCC=5V Threshold Current, ON IF(ON) - 1.2 1.6 mA RL=270Ω, VCC=5V -A Option - - 10 -B Option - - 5 Threshold Current, OFF I F(OFF) 0.3 0.75 - mA R L=270Ω, VCC=5V Hysteresis Ratio I F(OFF) / IF(ON) 0.5 - 0.9 RL=270Ω, VCC=5V Turn On Time T ON - 1.2 4 S VCC=5V, RL=270Ω, IF=IF(ON) Turn Off Time T OFF - 1.2 4 Rise Time T R - 0.1 - Fall Time T F - 0.1 - Isolation Specifications Isolation Voltage V ISO 5300 - - V RMS RH ≤ 50%, t=1min Input-Output Resistance R I-O 10 - - VI-O = 500VDC Electrical Characteristics, TA = 25°C (unless otherwise specified)
© 2013 Solid State Optronics • San José, CA Page 3 of 8 SDS6011 H/S/TR Rev 1.00 (10/31/2013) 001664 SDS6011 DC Input 1MHz Schmitt Trigger Optocoupler Process Step Description Parameter A Preheat Start Temperature (ºC) 150ºC B Preheat Finish Temperature (ºC) 180ºC C Preheat Time (s) 90 - 120s D Melting Temperature (ºC) 230ºC E Time above Melting Temperature (s) 30s F Peak Temperature, at Terminal (ºC) 260ºC G Dwell Time at Peak Temperature (s) 10s H Cool-down (ºC/s) <6ºC/s SDS6011 Solder Reflow Temperature Profile Recommendations (1) Infrared Reflow: Refer to the following figure as an example of an optimal temperature profile for single occurrence infrared reflow. Soldering process should not exceed temperature or time limits expressed herein. Su rface temperature of device package should not exceed 250ºC: A B C D F E G H (2) Wave Solder: (3) Hand Solder: Maximum Temperature: 260ºC (at terminal) Maximum Time: 10s Pre-heating: 100 - 150ºC (30 - 90s) Single Occurrence Maximum Temperature: 350ºC (at tip of soldering iron) Maximum Time: 3s Single Occurrence
© 2013 Solid State Optronics • San José, CA Page 4 of 8 SDS6011 H/S/TR Rev 1.00 (10/31/2013) 001664 SDS6011 DC Input 1MHz Schmitt Trigger Optocoupler
© 2013 Solid State Optronics • San José, CA Page 5 of 8 SDS6011 H/S/TR Rev 1.00 (10/31/2013) 001664 SDS6011 DC Input 1MHz Schmitt Trigger Optocoupler 6 PIN WIDE Lead Space Package (-H) Note: All dimensions in millimeters [mm] with inches in parenthesis ()
© 2013 Solid State Optronics • San José, CA Page 6 of 8 SDS6011 H/S/TR Rev 1.00 (10/31/2013) 001664 SDS6011 DC Input 1MHz Schmitt Trigger Optocoupler
6 PIN SMD Surface Mount Package Note: All dimensions in millimeters [mm] with inches in parenthesis ()
© 2013 Solid State Optronics • San José, CA Page 7 of 8 SDS6011 H/S/TR Rev 1.00 (10/31/2013) 001664 SDS6011 DC Input 1MHz Schmitt Trigger Optocoupler SDS6011 Packaging Specifications Tape & Reel Specifications (T&R) Note: All dimensions in millimeters [mm] L M N O Q R S B B1 D D1 E K P P1 T W
© 2013 Solid State Optronics • San José, CA Page 8 of 8 SDS6011 H/S/TR Rev 1.00 (10/31/2013) 001664 SDS6011 DC Input 1MHz Schmitt Trigger Optocoupler Note: All weights above are in GRAMS, and include packaging materials where applicable Device Single Unit Full Tube (60pcs) Full Pouch (10 tubes) Full Reel (1000pcs) SDS6011(-H) 0.41 44 450 - SDS6011-S 0.40 42 440 - SDS6011-STR 0.40 - - 880 Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO reserves the right to make changes to product description, specifications at any time without further notices. SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent licenses nor indemnity are expressed or implied. Except as specified in SSO’s Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other warranty, expressed or implied, including merchantability and fitness for particular use. DISCLAIMER SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be reasonably expected to result in significant injury to the user, or (d) a critical component of a life support device or system whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness. LIFE SUPPORT POLICY