SDM119HJA

SDM119HJA SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

S D M 1 1 9 H J A - 1 R 2 M F (a) (b) (d) (c) 1. PART NO. EXPRESSION : (b) Dimension code (c) Inductance code : 1R2 = 1.20uH (a) Series code 2. CONFIGURATION & DIMENSIONS : A 4. MATERIALS : SUPERWORLD ELECTRONICS (S) PTE LTD (a) Core : e Iron Core (c) Solder : Sn99.95%-Cu0.05% 3. SCHEMATIC : (d) Tolerance code : M = ±20% (e) F : RoHS Compliant SDM119HJA SERIESDIP POWER CHOKE COIL PG. 1 15.03.2010 PCB Pattern BCD 11.5 Max. (b) Wire : Enamelled Copper Wire Unit:m/m E 6.6±0.5 A B ØW CD F ØW 1.5±0.1 9.3±0.5 9.3±0.5 LSeries SDM119HJA-R30MF SDM119HJA-R47MF (e) 12.0 12.0 F 11.5 Max. 11.5 Max.SDM119HJA-R68MF SDM119HJA-1R2MF E L G H E 6.6±0.5 6.6±0.5 6.6±0.5 6.6±0.5 F 0.5±0.2 0.5±0.2 0.5±0.2 0.5±0.2 G L 1.8 Typ. 1.8 Typ. 1.6 Typ. 1.8 Typ. H R32e YY.WW NOTE : Specifications subject to change without notice. Please check our website for latest information.

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 15.03.2010 ±20% @ 0Adc Inductance L ( uH ) 0.47 0.30 6. ELECTRICAL CHARACTERISTICS : SDM119HJA-R30MF SDM119HJA-R47MF Part No.

0 Irms

Max. ( A ) 0.4060 50 0.60 DCRIsat Max. ( A ) ( m ȍ ) ±8% 7. CHARACTERISTICS CURVES : f) Part temperature (ambient + temp. rise) : Shoul d not exceed 125°C under worst case operating conditions. e) Isat (A) : Will cause L to drop approximately 20% d) Irms (A) : Will cause an approximately temp. rise ǻT < 40°C a) Test Frequency : 100KHz/1.0V b) Operating temp. : -25°C to +125°C c) Ambient temp. : 20°C 5. GENERAL SPECIFICATION : Min. Q DIP POWER CHOKE COIL SDM119HJA SERIES 0.68 1.20SDM119HJA-1R2MF SDM119HJA-R68MF 401.253530 35 55 0.80 40 0 1 53 04 56 0 DC CURRENT(A) 0.1 0.2 0.3 0.4 0.5 INDUCTANCE (uH) 100 TEMP. RISE(oC) DMPI119HJA-R30M SDM119HJA-R30MF 0 1 53 04 56 0 DC CURRENT(A) 0. 2 0. 4 0. 6 0. 8 INDUCTANCE (uH) 100 TEMP. RISE(oC) DMPI119HJA-R47M SDM119HJA-R47MF 0 1 12 23 34 45 5 DC CURRENT(A) 0.2 0.4 0.6 0.8 INDUCTANCE (uH) 100 TEMP. RISE(oC) DMPI119HJA-R68M SDM119HJA-R68MF 07 1 4 2 1 2 8 3 5 DC CURRENT(A) 0. 6 1. 2 1. 8 2. 4 INDUCTANCE (uH) 100 TEMP. RISE(oC) DMPI119HJA-1R2M SDM119HJA-1R2MF

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 15.03.2010 7. CHARACTERISTICS CURVES : 0.30.05 0.10.001 SDM119HJA-R45MF SDM119HJA-R30MF 0.47 0.27 0.300.31 0.30 0.500.50 0.50 Inductance 0.46 0.26 0.46 0.270.300.30 0.30 0.500.50 0.49 0.270.29 0.49 0.46 0.260.26 0.26 0.450.45 0.45 0.25 0.25 0.440.44 Frequency ( MHz ) DIP POWER CHOKE COIL SDM119HJA SERIES 0.65 1.20 SDM119HJA-R68MF SDM119HJA-1R0MF 0.62 1.14 0.62 0.62 1.13 1.13 Frequency ( MHz ) 2.66 1.79 SDM119HJA-1R0MF SDM119HJA-R68MF 0.001 0.58 (uH) SDM119HJA-R30MF Inductance 6.61 7.59 5.99 5.49 6.92 6.38 8.0 6.50 9.0 10 5.92 5.46 DMPI119HJA-Series-Z01 ˃ˁ˃ ˃ˁˈ ˄ˁ˃ ˄ˁˈ ˅ˁ˃ FREQUENCY(MHz) INDUCTANCE(uH) SDM119HJA Series DMPI119HJA-Series-Z01 ˄˃˃ FREQUENCY(MHz) Q SDM119HJA Series

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 4 15.03.2010 PERFORMANCE Refer to standard electrical characteristics list should be covered with solder. More than 90% of the terminal electrode Preheating seconds 1. Appearance : No significant abnormality 2. Inductance change : Within ±10% of initial value Preheating seconds No disconnection or short circuit. 2. Inductance : Within ±10% of initial value. 1. Appearance : No damage No disconnection or short circuit. 2. Inductance : Within ±10% of initial value. 1. Appearance : No damage Reliability Test Humidity Resistance High Temperature Life Test Life Test Low Temperature Thermal Shock Solder Heat Resistance 150°C 260°C 150°C 245°C Inductance Electrical Characteristics Test DCR Heat Rated Current (Irms) Solderability Test Mechanical Performance Test Saturation Current (Isat) 8. RELIABILITY AND TEST CONDITION : ITEM Time : 500±12 hours Applied Current : Rated Current Humidity : 90% to 95% Temperature : 40±5°C Temperature : 85±5°C Time : 500±12 hours Temperature (°C) Conditions of 1 cycle. Temperature : -20±5°C Time : 500±12 hours Room Temperature Room Temperature 125±3 -25±3 Recovery: 4 to 24hrs of recovery under the standard Total : 5 cycles Step Within 3 Within 3 30±3 Times (min.) 30±3 Preheat : 150°C, 60sec. Solder : lead free Solder Temperature : 260±5°C Flux : rosin Dip Time : 10±0.5sec. 10±0.5 seconds Dipping cooling Natural 4±1 seconds Dipping cooling Natural HP4284A or CH3302/1320/1320S TEST CONDITION Isat(A) will cause Lo to drop approximately 20% HIOKI3540 Irms(A) will cause an temp rise < 40°C typ. solder bath at 245±5°C for 5 seconds After fluxing, component shall be dipped in a melted condition after the removal from test chamber condition after the removal from test chamber Recovery: 4 to 24hrs of recovery under the standard condition after the removal from test chamber Recovery: 4 to 24hrs of recovery under the standard condition after the removal from test chamber Recovery: 4 to 24hrs of recovery under the standard DIP POWER CHOKE COIL SDM119HJA SERIES Appearance : Cracking, chipping and any otherRandom Vibration Test A period of 2 hours in each of 3 mutually perpendicular Directions and times : X, Y, Z directions for 2 hours. Amplitude : 1.52mm Frequency : 10-55-10Hz for 1 min. directions (Total 6 hours). defects harmful to the characteristics should not be allowed.

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 6 15.03.2010 10. PACKING AND QUANTITY : Inner Box Carton 756 1512 Styrofoam Size 108 SDM119HJA a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. Application Notice 2. Transportation : c) Bulk handling should ensure that abrasion and mechanical shock are minimized. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) The packaging material should be kept where no chlorine or sulfur exists in the air. b) Recommended products should be used within 6 months from the time of delivery. a) Temperature and humidity conditions : Less than 30°C and 70% RH. To maintain the solderabililty of terminal electrodes : 1. Storage Conditions : DIP POWER CHOKE COIL SDM119HJA SERIES