SDM109HHA SUPERWORLD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
S D M 1 0 9 H H A - 1 R 0 M F (a) (b) (d) (c) 1. PART NO. EXPRESSION : (b) Dimension code (c) Inductance code : 1R0 = 1.00uH (a) Series code 2. CONFIGURATION & DIMENSIONS : A 4. MATERIALS : SUPERWORLD ELECTRONICS (S) PTE LTD (a) Core : e Iron Core (c) Solder : Sn99.95%-Cu0.05% 3. SCHEMATIC : (d) Tolerance code : M = ±20% (e) F : RoHS Compliant SDM109HHA SERIESDIP POWER CHOKE COIL PG. 1 11.06.2010 PCB Pattern BCD 10.5 Max. (b) Wire : Enamelled Copper Wire Unit:m/m E 5.3±0.5 A B ØW CD F ØW 1.4±0.1 7.5±0.5 7.5±0.5 LSeries SDM109HHA-R32MF SDM109HHA-R47MF (e) 11.0 11.0 F 10.5 Max. 10.5 Max.SDM109HHA-R80MF SDM109HHA-1R0MF E L G H E 5.3±0.5 5.3±0.5 5.3±0.5 5.3±0.5 F 0.5±0.2 0.5±0.2 0.5±0.2 0.5±0.2 G L 1.7 Typ. 1.5 Typ. 1.4 Typ. 1.6 Typ. H R32e YY.WW NOTE : Specifications subject to change without notice. Please check our website for latest information.
SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 11.06.2010 ±20% @ 0Adc Inductance L ( uH ) 0.47 0.32 6. ELECTRICAL CHARACTERISTICS : SDM109HHA-R32MF SDM109HHA-R47MF Part No.
0 Irms
Max. ( A ) 0.3645 45 0.67 DCRIsat Max. ( A ) ( m ȍ ) ±8% 7. CHARACTERISTICS CURVES : f) Part temperature (ambient + temp. rise) : Shoul d not exceed 125°C under worst case operating conditions. e) Isat (A) : Will cause L to drop approximately 20% d) Irms (A) : Will cause an approximately temp. rise ǻT < 40°C a) Test Frequency : 100KHz/1.0V b) Operating temp. : -25°C to +125°C c) Ambient temp. : 20°C 5. GENERAL SPECIFICATION : Min. Q DIP POWER CHOKE COIL SDM109HHA SERIES 0.80 1.00SDM109HHA-1R0MF SDM109HHA-R80MF 401.503222 25 35 1.05 40 0 9 18 27 36 45 DC CURRENT(A) 0.1 0.2 0.3 0.4 0.5 INDUCTANCE (uH) TEMP. RISE(oC) DMPI109HHA-R32M SDM109HHA-R32MF 0 9 18 27 36 45 DC CURRENT(A) 0. 25 0.5 0. 75 INDUCTANCE (uH) TEMP. RISE(oC) DMPI109HHA-R47M SDM109HHA-R47MF 0 7 14 21 28 35 DC CURRENT(A) 0.4 0.8 1.2 1.6 INDUCTANCE (uH) TEMP. RISE(oC) DMPI109HHA-R80M SDM109HHA-R80MF 0 8 16 24 32 DC CURRENT(A) 0.5 1.5 INDUCTANCE (uH) TEMP. RISE(oC) DMPI109HHA-1R0M SDM109HHA-1R0MF
˄˃˃ FREQUENCY(MHz) Q ˥ˆ˅ ˥ˇˊ ˥ˈ˃ ˥ˋ˃ ˄˥˃ SDM109HHA Series ˃ˁˈ ˄ˁˈ FREQUENCY(MHz) INDUCTANCE(uH) ˥ˆ˅ ˥ˇˊ ˥ˈ˃ ˥ˋ˃ ˄˥˃ SDM109HHA Series NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 11.06.2010 7. CHARACTERISTICS CURVES : 0.30.05 0.10.001 SDM088HBA-R47MF SDM088HBA-R30MF 0.45 0.30 0.320.33 0.33 0.470.47 0.46 Inductance 0.42 0.28 0.43 0.290.320.32 0.32 0.460.46 0.46 0.290.29 0.43 0.42 0.270.28 0.28 0.420.42 0.41 0.27 0.27 0.410.41 Frequency ( MHz ) DIP POWER CHOKE COIL SDM109HHA SERIES 0.48 0.78 SDM088HBA-R50MF SDM088HBA-R80MF 0.45 0.73 0.45 0.44 0.72 0.72 Frequency ( MHz ) 2.04 1.72 1.76 SDM088HBA-R80MF SDM088HBA-1R0MF SDM088HBA-R50MF 0.001 0.82 (uH) SDM088HBA-R30MF Inductance 6.89 6.56 6.60 5.97 5.49 6.27 5.77 6.01 5.53 8.0 6.08 9.0 10 5.53 5.08
SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 4 11.06.2010 PERFORMANCE Refer to standard electrical characteristics list should be covered with solder. More than 90% of the terminal electrode Preheating seconds 1. Appearance : No significant abnormality 2. Inductance change : Within ±10% of initial value Preheating seconds No disconnection or short circuit. 2. Inductance : Within ±10% of initial value. 1. Appearance : No damage No disconnection or short circuit. 2. Inductance : Within ±10% of initial value. 1. Appearance : No damage Reliability Test Humidity Resistance High Temperature Life Test Life Test Low Temperature Thermal Shock Solder Heat Resistance 150°C 260°C 150°C 245°C Inductance Electrical Characteristics Test DCR Heat Rated Current (Irms) Solderability Test Mechanical Performance Test Saturation Current (Isat) 8. RELIABILITY AND TEST CONDITION : ITEM Time : 500±12 hours Applied Current : Rated Current Humidity : 90% to 95% Temperature : 40±5°C Temperature : 85±5°C Time : 500±12 hours Temperature (°C) Conditions of 1 cycle. Temperature : -20±5°C Time : 500±12 hours Room Temperature Room Temperature 125±3 -25±3 Recovery: 4 to 24hrs of recovery under the standard Total : 5 cycles Step Within 3 Within 3 30±3 Times (min.) 30±3 Preheat : 150°C, 60sec. Solder : lead free Solder Temperature : 260±5°C Flux : rosin Dip Time : 10±0.5sec. 10±0.5 seconds Dipping cooling Natural 4±1 seconds Dipping cooling Natural HP4284A or CH3302/1320/1320S TEST CONDITION Isat(A) will cause Lo to drop approximately 20% HIOKI3540 Irms(A) will cause an temp rise < 40°C typ. solder bath at 245±5°C for 5 seconds After fluxing, component shall be dipped in a melted condition after the removal from test chamber condition after the removal from test chamber Recovery: 4 to 24hrs of recovery under the standard condition after the removal from test chamber Recovery: 4 to 24hrs of recovery under the standard condition after the removal from test chamber Recovery: 4 to 24hrs of recovery under the standard DIP POWER CHOKE COIL SDM109HHA SERIES Appearance : Cracking, chipping and any otherRandom Vibration Test A period of 2 hours in each of 3 mutually perpendicular Directions and times : X, Y, Z directions for 2 hours. Amplitude : 1.52mm Frequency : 10-55-10Hz for 1 min. directions (Total 6 hours). defects harmful to the characteristics should not be allowed.
SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 6 11.06.2010 10. PACKING AND QUANTITY : Inner Box Carton 840 1680 Styrofoam Size 120 SDM109HHA a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. Application Notice 2. Transportation : c) Bulk handling should ensure that abrasion and mechanical shock are minimized. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) The packaging material should be kept where no chlorine or sulfur exists in the air. b) Recommended products should be used within 6 months from the time of delivery. a) Temperature and humidity conditions : Less than 30°C and 70% RH. To maintain the solderabililty of terminal electrodes : 1. Storage Conditions : DIP POWER CHOKE COIL SDM109HHA SERIES