SDI565047-103F

SDI565047 SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

(a) (c)(b) (e) (d) 1. PART NO. EXPRESSION : (b) Dimension code (c) Inductance code : R12 = 0.12uH (a) Series code 2. CONFIGURATION & DIMENSIONS : SUPERWORLD ELECTRONICS (S) PTE LTD (d) Tolerance code : K = ±10%, M = ±20% (e) F : Lead Free SDI565047 SERIESWIREWOUND CHIP INDUCTORS PG. 1 NOTE : Specifications subject to change without notice. Please check our website for latest information. 31.07.2008 S D I 5 6 5 0 4 7 - R 1 2 M F 4. GENERAL SPECIFICATION : c) Rated current : Base on temp. rise & ǻL/L0A=10% Max. b) Operating temp. : -25°C to 85°C C a) Ambient temp. : 20°C 3. SCHEMATIC : BA 5.7±0.3 5.0±0.3 A ECH F JI 2.0 Ref.2.0 Ref. Unit:m/m FB E I IJ PCB Pattern H E

SUPERWORLD ELECTRONICS (S) PTE LTD SDI565047 SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 31.07.2008 5. ELECTRICAL CHARACTERISTICS : WIREWOUND CHIP INDUCTORS SRF IDC DCR SDI565047-330F SDI565047-471F SDI565047-472F SDI565047-103F SDI565047-102F SDI565047-222F SDI565047-681F SDI565047-221F SDI565047-331F SDI565047-151F SDI565047-680F SDI565047-101F SDI565047-470F SDI565047-2R2F SDI565047-220F SDI565047-100F SDI565047-150F SDI565047-4R7F SDI565047-6R8F SDI565047-3R3F SDI565047-1R0F SDI565047-1R5F SDI565047-R47F SDI565047-R27F SDI565047-R12F Part No. 9000.44812 2407.5602.4 0.5 0.8 1.7 1.2 1.9 140.0 61.04 30.10 14.42 11.34 100 150 190 3.1 4.0 5.0 7.6 6.5 6.160 3.360 2.660 270 320 420 0.938 1.204 0.560 640 560 800 320080 0.0410 0.266 0.210 0.1300 1200 1400 1700 0.1040 0.0574 0.0500 2000 2700 2900 110 150 200 300 450 ( MHz ) Min. 0.0310 0.0270 0.0182 3700 4000 4800 0.0140 0.0098 ( ȍ ) Max. 5300 6000 Max. ( mA ) M M, K M, K M, K M M M M M M M M M, K M, K M, K M, K M, K M, K M, K M, K M, K M, K M, K M, K M, K Test 100K 10K 10K 10K 100K 100K 100K 100K 100K ( Hz ) FrequencyInductance ( uH ) 2.2 6.8 4.7 3.3 1.5 1.0 0.47 0.27 0.12 100 1000 680 470 330 220 150 10000 4700 2200 Inductance tolerance : : J : ±5% K : ±10% M : ±20% 10K Tolerance

TempMIL-STD-202G Method 108A TimeT More than 95% of termincal electrode should SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. MIL-STD-202G Method 208H Physical Characteristics Tests Reference documents: IPC J-STD-002B Solderability Test be covered with solder. PG. 3 31.07.2008 Solder : Sn(63)/Pb(37) Flux : rosin flux Dip time : 5 secs. Solder temperature : 245±5°C -40°C 1. No case deformation or change in appearance. 1. No case deformation or change in appearance. 1. No case deformation or change in appearance. Reference documents: MIL-STD-202G Method 107G Thermal shock test Reference documents: 4. ǻDCR/DCR<10% T : weight< 28g : 15 Min. 28g<weight<136g : 30 Min. 2. ǻL/L<30% (Closed Magnetic Circuit) 3. ǻQ/Q < 30% ǻL/L<10% MIL-STD-202G Method 103B 4. ǻDCR/DCR<10% 3. ǻQ/Q < 30% 3. ǻQ/Q < 30% Humidity Test IEC 68-2-1A 6.1 6.2 2. ǻL/L<30% (Closed Magnetic Circuit) ǻL/L<10% 4. ǻDCR/DCR<10% Low Temperature Storage Test Reference documents: 2. ǻL/L<30% (Closed Magnetic Circuit) ǻL/L<10% 4. ǻDCR/DCR<10% Change time < 5 min Room Temp Temp 125°C Conditions of 1 cycle : Step 2 : 125°C for T time Step 1 : -40°C for T time Total : 20 cycles T Tested after 1 hour (less than 2 hours) at room temperature Tested while the specimens are still in the chamber 96H High temperature93%RH High humidity Time : 96±2 hours Temp & Humidity40°C Conditions Test Time Room Dry oven at temperature of 40±5°C for 24 hours Exposure : Temperature : 40±2°C, Humidity : 93±3% RH, Temp Measured after 24 hours Low temperature -25°C Room Temp 96H Test Time 96H Tested after 1 hour (less than 2 hours) at room temperature Temperature : -25±2°C Time : 96±2 hours Room Temp High temperature 85°C Test Time 1. No case deformation or change in appearance.High Temperature Storage Test 6. RELIABILITY AND TEST CONDITION : Reference documents: Environmental Tests ITEM 2. ǻL/L<30% (Closed Magnetic Circuit) ǻL/L<10% 3. ǻQ/Q < 30% PERFORMANCE Tested after 1 hour (less than 2 hours) at room temperature TEST CONDITION Temperature : 85±2°C Time : 96±2 hours SDI565047 SERIESWIREWOUND CHIP INDUCTORS

Refer to reflow curve. Peak temp. : 245±5°C Frequency : 10~55Hz Amplitude : 0.75mm directions (Total 6 hours). Bend PCB at middle point, the deflection shall be 2mm. Drop from a height of 1m with 981m/s² (100G) altitude (1 angle, 1 ridge and 2 surface orientations) Directions & times : X, Y, Z directions for 2 hours. A period of 2 hours in each of 3 mutually perpendicular SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. Pulling Test :Terminal Strength Push Test Reference documents: Reflow Curve JIS C 5321:1997 applied on the right conditions. A : Sectional area of terminal 8mm²<A<20mm² Bending Test : The terminal electrode & the dielectric must not be damaged by the forces 20mm²<A A<8mm² 10>10N >20N 10 Bending Test : R0.5 Time (sec)Force >5N 30 X Pulling Test : Vibration Test Reference documents: MIL-STD-202G Method 201A Drop Test Reference documents: MIL-STD-202G Method 203C 1. No case deformation or change in appearance. 4. ǻDCR/DCR<10% 2. ǻL/L<30% (Closed Magnetic Circuit) ǻL/L<10% 3. ǻQ/Q < 30% 2. ǻL/L<30% (Closed Magnetic Circuit) 4. ǻDCR/DCR<10% 1. No case deformation or change in appearance. 3. ǻQ/Q < 30% ǻL/L<10% Reference documents: IPC J-STD-020B Reflow Soldering Heat Endurance of 6. RELIABILITY AND TEST CONDITION : 2. ǻL/L<30% (Closed Magnetic Circuit) 4. ǻDCR/DCR<10% 1. No case deformation or change in appearance. PERFORMANCE 3. ǻQ/Q < 30% ǻL/L<10% ITEM No. of cycle : 3 PG. 4 31.07.2008 Sample 1.0 Y 10Hz 1Min Time 55Hz Freq TEST CONDITION SDI565047 SERIESWIREWOUND CHIP INDUCTORS 270 250 200 150 100 300 Preheat PeakRamp-up Ramp-down

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. 31.07.2008 PG. 6 Cover tape 250mm Min. Tape leader 388mm Min. Tape trailer 160mm Min. 8-2. Quantity & G.W. per package SDI565047 SERIES OUTER : CARTON G.W. (Kg)G.W. (Kg) 0.781000 Q'TY (PCS) 16000 Q'TY (PCS) INNER : REEL SIZE (cm) 36 x 36 x 4016 Components 4R7 4R7 Direction of feed 4R7 4R7 4R7 4R7 SDI565047 SERIESWIREWOUND CHIP INDUCTORS 8-1. Reel & Tape Dimension 8. PACKAGING INFORMATION : ( Unit : mm ) 330 13±1 2.5±0.5 1.75±0.1 23±1 -0.00 +0.101.50 4±0.1 120°

31.07.2008 PG. 7 NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD SDI565047 SERIESWIREWOUND CHIP INDUCTORS 165° to 180° F Top cover tape 8-3. Tearing Off Force The force for tearing off cover tape is 10 to 60 grams in the arrow direction. Base tape a) Products should be handled with care to avoid damage or contamination from perspiration and skin oils. c) Bulk handling should ensure that abrasion and mechanical shock are minimized. b) The use of tweezers or vacuum pick up is strongly recommended for individual components. c) The packaging material should be kept where no chlorine or sulfur exists in the air. b) Recommended products should be used within 6 months from the time of delivery. a) Temperature and humidity conditions : Less than 40°C and 70% RH. Application Notice 1. Storage Conditions : To maintain the solderabililty of terminal electrodes : 2. Transportation :