SD012-UVB-005 LUNA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Surface Mount AlGaN Photodiode SD012 -UVB -005 WWW.ADVANCEDPHOTONIX.COM Precision – Control – Results Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Page 1/3 REV 01-04-16 © 2016 Luna Optoelectronics. All rights reserved. Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 DESCRIPTION FEATURES The SD012 -UVB -005 is an AlGaN-based UVB photodiode with a 0.076 mm2 active area, SMT packaged. Unlike most UV detectors it cuts off unwanted visible light from its detection spectrum (220-320nm ), thereby eliminating the need for optical filter.

  • Schottky Type Photodiode
  • Protovoltaic Mode Operation
  • Low Noise
  • High Speed
  • Visible Blindness RELIABILITY APPLICATIONS This Luna high-reliability device is in principle able to meet military test requirements (Mil-STD -750, Mil-STD -883) after proper screening and group test. Contact Luna for recommendations on specific test conditions and procedures.
  • UVB Detection and Monitoring
  • Medical
  • Military ABSOLUTE MAXIMUM RATINGS SYMBOL MIN MAX UNITS Ta = 23°C UNLESS NOTED OTHERWISE Storage Temperature - 40 to +125 °C Operating Temperature - 30 to +85 °C Soldering Temperature - - +260 °C Forward Current - - 1.0 mA Reverse Voltage - - 5.0 V

Surface Mount AlGaN Photodiode SD012 -UVB -005 WWW.ADVANCEDPHOTONIX.COM Precision – Control – Results Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Page 2/3 REV 01-04-16 © 2016 Luna Optoelectronics. All rights reserved. Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 OPTO -ELECTRICAL PARAMETERS Ta = 23°C UNLESS NOTED OTHERWISE PARAMETER TEST CONDITIONS MIN TYP MAX UNITS Dark Current V R = 0.1V - 0.1 100 pA Shunt Resistance V R = 10 mV 1.0 100 - GΩ Short Circuit Current UVI=1.0 - 20 - nA Spectral Application Range Spot Scan 220 - 320 nm Responsivity Peak l= 300 nm V, VR = 0 V - 0.11 - A/W Capacitance V bias = 0V; f = 1 MHz - 10 - pF Noise Equivalent Power λ= 300 nm - 1.6 - 10- 17W/Hz 0.5 TYPICAL PERFORMANCE SPECTRAL RESPONSE NOISE vs BIAS UV -A PHOTOCURRENT UV -I PHOTOCURRENT REFLOW PROFILE APPLICATION CIRCUIT 1.E-16 1.E-15 1.E-14 1.E-13 1.E-12 Noise Current (A/rt_Hz) Reverse Voltage (V)

Surface Mount AlGaN Photodiode SD012 -UVB -005 WWW.ADVANCEDPHOTONIX.COM Precision – Control – Results Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Page 3/3 REV 01-04-16 © 2016 Luna Optoelectronics. All rights reserved. Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935