SCN35SXV-100-1R4A008JH

SCN35XV-100-1R4A015JH KEMET | Alldatasheet

Document overview

• PDF pages: 11

Technical content

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Benefits

• Proprietary 7HT ferrite material
• Hi gh rated voltage up to 1,000 V AC/DC
• Operating t emperature r ange fr om − 40°C u p t o + 150°C
• Hi gh permeability
• Hi gh impedance
• UL 9 4 V –0 fla me r etardant r ated b ase a nd c ap
• AEC-Q200 qu alified Overview The KEMET SCN-XV coils are dual mode chokes with a wide variety of characteristics for automotive and industrial application, especially suitable for harsh environment situations. These hybrid coils combine the two functions of normal mode countermeasure and common mode noise suppression in just one coil. Reducing the number of required products ensures cost savings and space efficiency. Ou r pr oprietary fe rrite co re ma terial 7H T pr ovides op timized solutions for high-temperature requirements, and in addition displays high Bs characteristics, and are useful in v arious n oise c ountermeasure fi elds.

Applications

• On board charger for EV/PHEV
• Wi reless charging systems with 85 kHz
• Me dium power drives for steering, air conditioning and mild hybrid 48 V systems
• Hi gh voltage automotive and harsh environment industrial E MI fi ltering AC Line Filters Dual Mode SCN-XV Coils, Automotive Grade SCN35XV Type SCN35SXV Type

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters – Dual Mode SCN-XV Coils, Automotive Grade Part Number System SCN 35XV- 100- 1R4 A 015 JH Series Dimension Code (See Dimensions) Rated Current (A) Wire Diameter (mm) Windings Number of Turns Terminal Base Type SCN 35XV 35SXV xxx- = xx.x A Examples: 100 = 10.0 A 190 = 19.0 A R = Decimal point Examples: 1R4 = 1.4 mm 1R9 = 1.9 mm A = Single 00x = x turns 0xx = xx turns Examples: 008 = 8 turns 015 = 15 turns JH = Horizontal type Dimensions – Millimeters １Ｎ ２Ｎ b a1b b bH L TODOD Figure 1 Part Name Dimensions (mm) Pin Pitch1 (Reference) Figure OD (Maximum) T (Maximum) H (Maximum) L a1 a2 b 1 Pin pitch listed above for reference only. Values not guaranteed.

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters – Dual Mode SCN-XV Coils, Automotive Grade Magnetic Permeability of Ferrite Material In order to achieve most efficient noise reduction, it is important to select the material according to the target frequency ba nd. Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band. A schematic representation of the relationship between the magnetic permeability of each material and the corresponding effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures. The effective frequency range varies depending on core shape, size and number of windings. This frequency dependence of th e m agnetic p ermeability a s s hown i n th e fi gure s erves f or r eference p urposes o nly a nd i t s hould b e t ested o n th e a ctual dev ice to determine its effectiveness. S18H, S15H, 10H, 7H, 7HT, 5H, 5HT, 1400L and 700L are KEMET’s proprietary ferrite material names. Other materials can also be available on request. Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range 10 kHz 10,000 20,000 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz Effective Frequency Range Magnetic Permeability Ni-Zn Series 1400L 700L S18H S15H 10H 7H, 7HT 5H, 5HT Mn-Zn Series Lower magnetic permeability: Higher noise suppression effect in the higher frequency range Higher magnetic permeability: Higher noise suppression effect in the lower frequency range Nanocrystalline Core Higher magnetic permeability: Higher noise suppression effect in the broadband frequency range

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters – Dual Mode SCN-XV Coils, Automotive Grade Material List Core Structure for 2 Functions

• Bo th functions of common and differential mode in one package.
• Hig h temperature resistant.
• Sup erior DC superimposing characteristics.
• Fl at top surface for easy access to heat sink. Common Mode Differential (Normal) Mode Magnetic flux is under control based on electromagnetic simulation. Environmental Compliance All KEMET AC Line Filters are RoHS Compliant.

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters – Dual Mode SCN-XV Coils, Automotive Grade Performance Characteristics Item Performance Characteristics Rated Voltage 1,000 VAC/VDC Withstanding Voltage 2,400 VAC (2 seconds, between lines) Insulation Resistance > 1 00 M Ω a t 1 ,000 V DC ( between l ines) Rated Current Range 10 – 19 A Rated Inductance Range 0.38 – 2.7 mH ±30% Inductance Measurement Condition 100 kHz Operating Temperature Range −40°C t o + 150°C ( include s elf t emperature r ise) Table 1 – Ratings & Part Number Reference Part Number Rated Voltage AC/DC (V) Rated Current (A) Inductance (Common) (mH) ±30% Inductance (Normal) (μH) Typical DC Resistance/ Line (mΩ) ±13% Temperature Rise (K) Maximum Wire Diameter (mm) Weight (g) Approximate Frequency Characteristics SCN35XV-100-1R4A015JH Common Mode Normal Mode

6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters – Dual Mode SCN-XV Coils, Automotive Grade Frequency Characteristics cont. SCN35XV-110-1R5A014JH Common Mode Normal Mode SCN35XV-120-1R6A012JH Common Mode Normal Mode

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters – Dual Mode SCN-XV Coils, Automotive Grade Frequency Characteristics cont. SCN35XV-140-1R7A010JH Common Mode Normal Mode SCN35XV-170-1R9A008JH Common Mode Normal Mode

8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters – Dual Mode SCN-XV Coils, Automotive Grade Frequency Characteristics cont. SCN35SXV-110-1R4A015JH Common Mode Normal Mode SCN35SXV-120-1R5A014JH Common Mode Normal Mode

9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters – Dual Mode SCN-XV Coils, Automotive Grade Frequency Characteristics cont. SCN35SXV-130-1R6A012JH Common Mode Normal Mode SCN35SXV-150-1R7A010JH Common Mode Normal Mode

10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters – Dual Mode SCN-XV Coils, Automotive Grade Frequency Characteristics cont. SCN35SXV-190-1R9A008JH Common Mode Normal Mode Packaging Type Packaging Type Pieces Per Box SCN35XV Tray 80 SCN35SXV 100 Handling Precautions Precautions for product storage AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET r ecommends th at m aximum s torage t emperature n ot e xceed 4 0°C a nd m aximum s torage h umidity n ot e xceed 7 re lative h umidity. A tmospheres s hould b e f ree o f c hlorine a nd s ulfur b earing c ompounds. T emperature fl uctuations s hould be mi nimized t o a void c ondensation o n th e p arts. A void s torage n ear s trong m agnetic fi elds, a s th is m ight m agnetize th e pr oduct. For o ptimized s olderability, A C l ine fi lters s tock s hould b e u sed p romptly a nd p referably w ithin 6 m onths o f r eceipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using the product, check and evaluate the value of the core temperature rise under actual operating conditions.

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard LF 0083_SCN-XV • 2/18/2022 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com AC Line Filters – Dual Mode SCN-XV Coils, Automotive Grade KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation.