SCI1008S-24NF

SCI1008S SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

(a) (c) (b) (e) (d) 1. PART NO. EXPRESSION : (b) Dimension code (c) Type code : S ( Standard ) (a) Series code 2. CONFIGURATION & DIMENSIONS : A 4. MATERIALS : SUPERWORLD ELECTRONICS (S) PTE LTD (a) Core : Ceramic U core (c) Terminal Metallization : Ag + Ni + Au 3. SCHEMATIC : (d) Inductance code : 5N6 = 5.6nH (e) Tolerance code : G = ±2%, J = ±5%, K = ±10% SCI1008S SERIESWIREWOUND CHIP INDUCTORS PG. 1 NOTE : Specifications subject to change without notice. Please check our website for latest information. 15.01.2008 PCB Pattern a b (b) Wire : Enamelled Copper Wire BCDEFGH c S C I 1 0 0 8 S - 5 N 6 K F I J I H A F G F E D CB Unit:m/m 1.27 Ref. JI (f) F : Lead Free (f)

SUPERWORLD ELECTRONICS (S) PTE LTD 6. ELECTRICAL CHARACTERISTICS : d) Rated current : Base on temp. rise & ǻL/L0A=10% Max. c) Temperature rise : 40°C Max. b) Operating temp. : -40°C to +125°C a) Storage temp. : -25°C to +80°C SCI1008S SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 15.01.2008 e) Resistance to solder heat : 260°C.10sec 5. GENERAL SPECIFICATION : WIREWOUND CHIP INDUCTORS K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G Available Tolerance SCI1008S-R10F SCI1008S-R27F SCI1008S-R15F SCI1008S-R18F SCI1008S-R12F SCI1008S-R22F SCI1008S-22NF SCI1008S-47NF SCI1008S-56NF SCI1008S-82NF SCI1008S-68NF SCI1008S-27NF SCI1008S-39NF SCI1008S-33NF K, J SCI1008S-10NF SCI1008S-15NF SCI1008S-12NF SCI1008S-18NF SCI1008S-5N6F Part No. Q Test IDCDCRSRFQTestL 350 650 0.56010006025100 4525220 270 45 25 180 150 120 4525 100 0.840 700 600100 0.910 750 850 950350 100 100 0.770 0.700 0.630 500 500 650 580 620 35050 0.120 24005522 50 6547 50 65 6050 50 55 350 0.160 1500 1300 1300 1000350 350 350 0.180 0.200 0.220 1600 1500 1600 350 350 350 0.130 0.150 0.140 50 5010 Freq ( MHz ) 5.6 ( nH ) 5050 Min. 4100500 0.080 2400 3300 2500 500 500 350 0.090 0.120 0.110 4000 ( MHz ) Min. 1500 ( MHz ) Freq 0.150 Max. ( ȍ ) 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 ( mA ) Max. SCI1008S-24NF 35050 0.120 19005524 1000 K, J, GSCI1008S-62NF 62 50 65 1250 350 0.200 1000 K, J, GSCI1008S-75NF 75 50 60 1100 350 0.210 1000 K, J, GSCI1008S-R24F 4525240 100 0.880 650 500 K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 15.01.2008 WIREWOUND CHIP INDUCTORS 6. ELECTRICAL CHARACTERISTICS : SCI1008S SERIES 10000 2.52K, J, GSCI1008S-103F SCI1008S-153F SCI1008S-123F 15000 12000 K, J, G K, J, G 2.52 2.52 7.962200K, J, GSCI1008S-2R2F SCI1008S-4R7F SCI1008S-8R2F SCI1008S-5R6F SCI1008S-6R8F SCI1008S-2R7F SCI1008S-3R3F SCI1008S-3R9F 7.964700K, J, G 8200 5600 6800 K, J, G K, J, G K, J, G 7.96 7.96 7.96 3900 2700 3300 K, J, G K, J, G K, J, G 7.96 7.96 7.96 7.96 150 20 9.0015 7.96 7.9615 120 130 11.5 10.5 160 2.80 2805028 25.2 9020 7.96 7.96 7.96 25.2 25.2 25.222 140 110 100 4.00 260 170 240 200 6.00 4.00 4.90 290 260 2903.20 3.40 3.60 K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G K, J, G SCI1008S-R56F SCI1008S-R62F SCI1008S-R68F SCI1008S-R75F SCI1008S-R47F SCI1008S-R39F SCI1008S-R33F 620 680 750 560 375 360 375 415 100 100 100 100 1.33 1.47 1.54 1.40 470 330 390 450 570 500 100 100 100 1.19 1.05 1.12 360 400 300 400 470 450 470 SCI1008S-1R0F SCI1008S-1R2F SCI1008S-1R5F SCI1008S-1R8F 251000K, J, G 1800 1200 1500 K, J, G K, J, G K, J, G 7.96 7.96 7.96 50 29035 28 160 250 200 1.75 370 310 330 300 2.00 2.30 2.60 K, J, GSCI1008S-R30F 300 45 25 585 100 1.00 450 K, J, GSCI1008S-R36F 360 45 25 530 100 1.10 470 SCI1008S-R82F SCI1008S-R91F 820 910K, J, G K, J, G 25 100 35 320 350 400 380 1.61 1.68 K, J, GSCI1008S-R43F 430 45 25 480 100 1.15 470 Inductance tolerance : : G : ±2% K : ±10% J : ±5% Tolerance AvailablePart No. L ( nH ) ( MHz ) ( MHz )Min.Freq Test Q Freq Q Test Max.Min. Max. ( MHz ) SRF ( ȍ ) DCR ( mA ) IDC

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 15.01.2008 7. ELECTRICAL CHARACTERISTICS : WIREWOUND CHIP INDUCTORS DIMENSION (unit: mm) PACKING QUANTITY 2.88 2.38 1.16 1.75 EMBOSSED CARRIER Q'TY (PCS) SCI0805 SCI1008 SCI0603 SCI0402 2000 2000 4000 4000 SERIES SCI1008 8.0 INNER REEL 2.73 4.0 COVER TAPE SCI0402 8.0 SCI0805 SCI0603 8.0 8.0 SERIES A 2.00.71 1.88 1.10 4.0 4.0 BC 3.5 1.75 2.33 20 . 2 0 1.753.5 3.5 3.5 1.75 1.75 DEF 0.230.650 1.48 1.15 0.20 0.25 HGI CONFIGURATTION : E±0.05 G±0.05 A±0.2 C±0.1 B±0.1 4±0.1 H±0.05Ø1.5 D±0.1 Ø1.5 I±0.05 F±0.1

SUPERWORLD ELECTRONICS (S) PTE LTD SCI1008S SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 5 15.01.2008 8. ENVIRONMENTAL CHARACTERISTICS : WIREWOUND CHIP INDUCTORS 1000 MOhm min. damage After test, inductors shall have no evidence of electrical and mechanical damage electrical and mechanical After test, inductors shall have no evidence of Electrical Performance Test : Refer to Electrcal Characteristics List Insulation Resistance Test Voltage Test Withstanding DC Resistance Rdc4 Over Load Test Rated Current IDC SRF Inductance 100VDC applied between inductor terminal and case AC voltage of 500VAC applied between inductors terminal and case for 1 minute. Applied 2 times of rated allowed DC current to inductor for a period of 5 minute. 10 seconds) to a tinned copper subs rate. A dynamiter The device should be REFLOW soldered (230±5°C for Mico-Ohmmeter (GOM-801G) HP8753D HP4291B HP4291B TEST CONDITIONS / TEST METHODSSPECIFICATIONITEM

SUPERWORLD ELECTRONICS (S) PTE LTD SCI1008S SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 6 15.01.2008 WIREWOUND CHIP INDUCTORS MIL-STD202F, METHOD 215D6 Resistance to solvent test There shall be no case of deformation change in appearance of obliteration of marking Amplitude : 1.5mm Oscillation Frequency : 10 to 55 to 10Hz for 1 min. Test device shall be soldered on the substrate Time : 2hrs for each axis (X, Y, Z), total 6hrs. Pre-heating : 150°C, 1 min Solder Composition : Sn/Pb=63/67 Solder Temperature : 230±5°C Immersion Time : 20±2sec Solder Temperature : 260±5°C Immersion Time : 5±2sec The device should be REFLOW soldered (230±5°C for 10 seconds) to a tinned copper subs rate. A dynamiter force gauge should be applied to the side of the conponent. The device must withstand a minimum force of 2 or 4 pounds without a failure of the termination attached to component. Pre-heating : 150°C, 1min Solder Composition : Sn/Pb=63/67 Solder Temperature : 230±5°C Immersion Time : 4±1sec Drop 1 time for each face and 1 time for each corner. Total drop 10 times. Drop Height : 100cm Drop Weight : 125g after fluxing (alpha 100 or equiv), inductor shall be dipped in a melted solder bath at 232±5°C for 5 seconds. Drop Test4

5 Solderability Test

(Push Test) Component After test, the chip inductor don't fell of broke on the The terminal should at least be 90% covered with solder P.C.Board The electrodes shall be at least 90% covered with new solder coating.

3 Component

(Push Test) Resistance to Soldering Heat Vibration Q change : within ±10% 1 lbs. For 0402 2 lbs. For 0603 3 lbs. For the rest Appearance : No damage Appearance : No damage L change : within ±5% Q change : within ±10% L change : within ±5% Mechanical Performance Test : ITEM SPECIFICATION TEST CONDITIONS / TEST METHODS

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 7 15.01.2008 SCI1008S SERIESWIREWOUND CHIP INDUCTORS Measured after exposure in the room condition for 2hrs Load Life Test Characteristics Low Temperature Thermal Shock High Temperature High Temperature Humidity Load Life Storage Test Test Storage Test Resistance Temperature Humidity 1525±22 Load : Allowed DC current Temperature : 40±2°C Relative Humidity : 90~95% Time : 1000±12hrs Load : Allowed DC current Total : 5 cycles Load : Allowed DC current Time : 48±2hrs Time : 1000±12hrs Temperature : 85±2°C Temperature : 125±2°C evidence of short of There should be no open circuit. 25±2 85±3 30 Inductors are to be tested after 1 hour at room Time : 96hrs ±2hrs Relative Humidity : 90~95% Temperature : 40±2°C -40°C ~ +125°C One cycle : temperature. Time : 48±2hrs Temperature : -40±2°CAppearance : No damage Q change : within ±20% L change : within ±10% Step -25±3 Temperature (°C) Time (min) Climatic Test : ITEM SPECIFICATION TEST CONDITIONS / TEST METHODS