SCI0402S

SCI0402S SUPERWORLD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

(a) (c) (b) (e) (d) 1. PART NO. EXPRESSION : (b) Dimension code (c) Type code : S ( Standard ) (a) Series code 2. CONFIGURATION & DIMENSIONS : A 4. MATERIALS : SUPERWORLD ELECTRONICS (S) PTE LTD (a) Core : Ceramic U core (c) Terminal Metallization : Ag + Ni + Au 3. SCHEMATIC : (d) Inductance code : 1N0 = 1.0nH (e) Tolerance code : G = ±2%, J = ±5%, K = ±10% SCI0402S SERIESWIREWOUND CHIP INDUCTORS PG. 1 NOTE : Specifications subject to change without notice. Please check our website for latest information. 15.01.2008 PCB Pattern a b (b) Wire : Enamelled Copper Wire BCDEFGH c S C I 0 4 0 2 S - 1 N 0 K F I J I H A F G F E D CB Unit:m/m 0.46 Ref. JI (f) F : Lead Free (f)

SUPERWORLD ELECTRONICS (S) PTE LTD 6. ELECTRICAL CHARACTERISTICS : d) Rated current : Base on temp. rise & ǻL/L0A=10% Max. c) Temperature rise : 40°C Max. b) Operating temp. : -40°C to +125°C a) Storage temp. : -25°C to +80°C SCI0402S SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 2 15.01.2008 e) Resistance to solder heat : 260°C.10sec 5. GENERAL SPECIFICATION : WIREWOUND CHIP INDUCTORS Available Tolerance K, J, GSCI0402S-5N1F K, J, GSCI0402S-8N2F SCI0402S-9N0F SCI0402S-10NF SCI0402S-11NF K, J, G K, J, G K, J, G SCI0402S-5N6F SCI0402S-6N2F SCI0402S-7N5F K, J, G K, J, G K, J, G K, JSCI0402S-2N2F SCI0402S-4N7F SCI0402S-3N6F SCI0402S-3N3F K, J, G K, J, G K, J, G SCI0402S-1N0F SCI0402S-2N0F Part No. K, J K 1.7GHz1.7GHz900MHz900MHzIDCDCRSRFQTestL 5.158000.083 4800 202505.1 4800 4800 3680 4000 4100 4400222508.2 250 250 250 9.0 250 250 250 6.2 5.6 7.5 8.506800.104 480 680 640 0.195 0.104 0.120 9.80 9.07 10.70 760 760 680 0.083 0.083 0.104 6.16 5.16 7.91 6800 7000 10800 11100 12700 4800 ( MHz ) Min. 192502.2 250 250 250 3.3 3.6 4.7 250 250 Freq ( MHz ) 2.0 1.0 ( nH ) Min. 2.199600.070 840 840 640 0.066 0.066 0.130 3.10 3.56 4.55 1040 1360 ( mA ) Max. 0.070 0.045 Max. ( ȍ ) 1.93 1.02 Typ. L 825.2556 848.8557 9.53 10.10 11.20 5.28 6.37 8.22 1002.2359 3.62 3.12 4.68 Typ. 1.02 1.93 LQ Typ. Q Typ. SCI0402S-1N9F K, J 11300 2501.9 16 1040 0.070 1.72 1.74 68 82 K, JSCI0402S-2N4F 10500152502.4 2.24 7900.070 68 2.2751 K, JSCI0402S-2N7F 10400162502.7 2.23 6400.120 61 2.2542 SCI0402S-4N3F K, J, G 4700 2504.3 18 700 0.091 4.19 4.30 47 71 SCI0402S-3N9F K, J, G 6000 2503.9 19 840 0.066 3.89 4.00 50 75 SCI0402S-6N8F K, J, G 4800 2506.8 20 680 0.083 6.56 6.93 63 78 K, J, GSCI0402S-8N7F 4160 182508.7 8.78 4800.200 73 9.2154 SCI0402S-9N5F K, J, G 3900 2509.5 18 480 0.200 9.42 9.98 54 69 5800

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 15.01.2008 WIREWOUND CHIP INDUCTORS 6. ELECTRICAL CHARACTERISTICS : SCI0402S SERIES K, J, GSCI0402S-12NF SCI0402S-27NF SCI0402S-23NF SCI0402S-19NF SCI0402S-15NF K, J, G K, J, G K, J, G K, J, G 7112.705311.906400.120 3450 2425012 3100 2700 3000 250 250 250 250 560 400 400 480 0.172 0.300 0.300 0.202 14.60 28.70 23.80 19.10 15.50 26.90 33.50 21.10 3600 K, J, GSCI0402S-13NF 5714.605113.404400.210 3280 2425013 SCI0402S-16NF K, J, G 3100 25016 24 560 0.220 16.60 18.80 46 47 SCI0402S-18NF K, J, G 3040 25018 24 420 0.230 18.30 20.28 57 62 SCI0402S-20NF K, J, G 2800 25020 25 420 0.250 20.70 23.66 52 53 SCI0402S-30NF SCI0402S-56NF SCI0402S-47NF SCI0402S-40NF SCI0402S-36NF K, J, G K, J, G K, J, G K, J, G K, J, G 2320 2350 2100 1760 2240 250 250 250 250 25030 25 320 150 100 320 0.440 0.830 0.970 0.440 39.50 50.00 39.00 4000.350 31.10 48.40 47.40 38.5046 39 SCI0402S-22NF K, J, G 2720 25022 25 400 0.300 23.20 26.75 53 53 SCI0402S-24NF K, J, G 2480 25024 25 400 0.300 25.10 29.50 51 50 SCI0402S-33NF K, J, G 2350 25033 24 400 0.350 34.90 41.74 31 32 SCI0402S-39NF K, J, G 2100 25039 25 200 0.550 41.70 50.23 47 45 SCI0402S-43NF K, J, G 2030 25043 25 100 0.810 45.80 61.55 46 34 SCI0402S-51NF K, J, G 1750 25051 25 100 0.820 - - -- SCI0402S-68NF K, J, G 1620 25068 22 100 1.120 - - -- Inductance tolerance : : G : ±2% K : ±10% J : ±5% Part No. ( nH )Available ( MHz ) Tolerance L Freq Test 900MHz ( ȍ ) DCR ( MHz ) SRFQ ( mA ) IDC L Typ.Typ. Typ. L 1.7GHz Q 900MHz Q 1.7GHz

NOTE : Specifications subject to change without notice. Please check our website for latest information. SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 15.01.2008 7. ELECTRICAL CHARACTERISTICS : WIREWOUND CHIP INDUCTORS DIMENSION (unit: mm) PACKING QUANTITY 2.88 2.38 1.16 1.75 EMBOSSED CARRIER Q'TY (PCS) SCI0805 SCI1008 SCI0603 SCI0402 2000 2000 4000 4000 SERIES SCI1008 8.0 INNER REEL 2.73 4.0 COVER TAPE SCI0402 8.0 SCI0805 SCI0603 8.0 8.0 SERIES A 2.00.71 1.88 1.10 4.0 4.0 BC 3.5 1.75 2.33 20 . 2 0 1.753.5 3.5 3.5 1.75 1.75 DEF 0.230.650 1.48 1.15 0.20 0.25 HGI CONFIGURATTION : E±0.05 G±0.05 A±0.2 C±0.1 B±0.1 4±0.1 H±0.05Ø1.5 D±0.1 Ø1.5 I±0.05 F±0.1

SUPERWORLD ELECTRONICS (S) PTE LTD SCI0402S SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 5 15.01.2008 8. ENVIRONMENTAL CHARACTERISTICS : WIREWOUND CHIP INDUCTORS 1000 MOhm min. damage After test, inductors shall have no evidence of electrical and mechanical damage electrical and mechanical After test, inductors shall have no evidence of Electrical Performance Test : Refer to Electrcal Characteristics List Insulation Resistance Test Voltage Test Withstanding DC Resistance Rdc4 Over Load Test Rated Current IDC SRF Inductance 100VDC applied between inductor terminal and case AC voltage of 500VAC applied between inductors terminal and case for 1 minute. Applied 2 times of rated allowed DC current to inductor for a period of 5 minute. 10 seconds) to a tinned copper subs rate. A dynamiter The device should be REFLOW soldered (230±5°C for Mico-Ohmmeter (GOM-801G) HP8753D HP4291B HP4291B TEST CONDITIONS / TEST METHODSSPECIFICATIONITEM

SUPERWORLD ELECTRONICS (S) PTE LTD SCI0402S SERIES NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 6 15.01.2008 WIREWOUND CHIP INDUCTORS MIL-STD202F, METHOD 215D6 Resistance to solvent test There shall be no case of deformation change in appearance of obliteration of marking Amplitude : 1.5mm Oscillation Frequency : 10 to 55 to 10Hz for 1 min. Test device shall be soldered on the substrate Time : 2hrs for each axis (X, Y, Z), total 6hrs. Pre-heating : 150°C, 1 min Solder Composition : Sn/Pb=63/67 Solder Temperature : 230±5°C Immersion Time : 20±2sec Solder Temperature : 260±5°C Immersion Time : 5±2sec The device should be REFLOW soldered (230±5°C for 10 seconds) to a tinned copper subs rate. A dynamiter force gauge should be applied to the side of the conponent. The device must withstand a minimum force of 2 or 4 pounds without a failure of the termination attached to component. Pre-heating : 150°C, 1min Solder Composition : Sn/Pb=63/67 Solder Temperature : 230±5°C Immersion Time : 4±1sec Drop 1 time for each face and 1 time for each corner. Total drop 10 times. Drop Height : 100cm Drop Weight : 125g after fluxing (alpha 100 or equiv), inductor shall be dipped in a melted solder bath at 232±5°C for 5 seconds. Drop Test4

5 Solderability Test

(Push Test) Component After test, the chip inductor don't fell of broke on the The terminal should at least be 90% covered with solder P.C.Board The electrodes shall be at least 90% covered with new solder coating.

3 Component

(Push Test) Resistance to Soldering Heat Vibration Q change : within ±10% 1 lbs. For 0402 2 lbs. For 0603 3 lbs. For the rest Appearance : No damage Appearance : No damage L change : within ±5% Q change : within ±10% L change : within ±5% Mechanical Performance Test : ITEM SPECIFICATION TEST CONDITIONS / TEST METHODS

SUPERWORLD ELECTRONICS (S) PTE LTD NOTE : Specifications subject to change without notice. Please check our website for latest information. PG. 7 15.01.2008 SCI0402S SERIESWIREWOUND CHIP INDUCTORS Measured after exposure in the room condition for 2hrs Load Life Test Characteristics Low Temperature Thermal Shock High Temperature High Temperature Humidity Load Life Storage Test Test Storage Test Resistance Temperature Humidity 1525±22 Load : Allowed DC current Temperature : 40±2°C Relative Humidity : 90~95% Time : 1000±12hrs Load : Allowed DC current Total : 5 cycles Load : Allowed DC current Time : 48±2hrs Time : 1000±12hrs Temperature : 85±2°C Temperature : 125±2°C evidence of short of There should be no open circuit. 25±2 85±3 30 Inductors are to be tested after 1 hour at room Time : 96hrs ±2hrs Relative Humidity : 90~95% Temperature : 40±2°C -40°C ~ +125°C One cycle : temperature. Time : 48±2hrs Temperature : -40±2°CAppearance : No damage Q change : within ±20% L change : within ±10% Step -25±3 Temperature (°C) Time (min) Climatic Test : ITEM SPECIFICATION TEST CONDITIONS / TEST METHODS