DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
Matching® Applied GaAs HBT InGaP HBT GaAs MESFET SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trade- Product Description
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com . InP HBT LDMOS RF MEMS SBW-5089(Z) DCto8GHz CASCADABLE InGaP/GaAs HBT MMIC AMPLIFIER The SBW-5089(Z) is a high performance InGaP/GaAs HBT MMIC Amplifier. A Dar- lington circuit fabricated with InGaP process technology provides broadband RF per- formance up to 8GHz and excellent thermal performance. The heterojunction increases breakdown voltage and minimi zes leakage current between junctions. Cancellation of emitter junction non-linear ities results in high suppression of inter- modulation products. Operation requires only a single positive voltage supply, 2 DC- blocking capacitors, a bias resistor and an RF choke. Gain Return Loss versus Frequency, ID=80mA (T yp), Tuned Application Circut 012345678 Frequency (GHz) Gain (dB) -25 -20 -15 -10 Return Loss (dB) Gain ORL IRL Available in RoHS Compliant and Pb-Free (Z Part Number) 50 Cascadable Gain Block Wideband Flat Gain to 3GHz: +/-1.4dB P1dB= 13.4 at 6GHz Input / Output VSWR <2:3to8GHz Patented Thermal Design Single Voltage Supply Operation
Applications
Wideband Instrumentation Fiber Optic Driver OC-48 Basestation SAT COM DS150923 Package: SOT-89 SBW-5089(Z) DCto8GHz Cascadable InGaP/GaAs HBT MMIC Amplifier Parameter Specification Unit ConditionMin. Typ. Max. Small Signal Gain, PC board and connector losses de-embedded 19.3 20.3 21.3 dB 850MHz 16.7 17.5 19.0 dB 3000MHz 17.2 dB 4200 MHz 14.2 15.0 16.5 dB 6000MHz Output Power at 1dB Compression 20.1 dBm 850MHz 18.4 19.4 dBm 1950MHz Output Third Order Intercept Point 35.5 dBm 850MHz 32.0 34.0 dBm 1950MHz Output Power 13.0 dBm 1950MHz, -45dBc ACP IS-95 9 Forward Chan- nels (POUT) Determined by Return Loss 6000 MHz >10dB Noise Figure 3.9 4.4 dB 1950MHz Worst case Input Return Loss 7.0 10.0 dB DCto6000MHz Worst case Output Return Loss 8.0 10.0 dB DCto6000MHz Device Operating Voltage 4.5 4.9 5.3 V Device Operating Current 72.0 80.0 88.0 mA Thermal Resistance 70 °C/W junction to backside Test Conditions: VS=8V I D=80mA T yp. OIP3 T one Spacing=1MHz TL=25°C Bias Resistance=39 POUT per tone=0dBm Z S=ZL=50
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com . SBW-5089(Z) Typical Performance at Key Operating Frequencies Absolute Maximum Ratings Parameter Rating Unit Max Device Current (lD)1 30 m A Max Device Voltage (VD)6 V Max RF Input Power 17 dBm Max Dissipated Power 0.65 W Max Junction Temperature (T J)1 50 ° C Operating Temperature Range (TL) -40 to + 85 °C Max Storage Temperature 150 °C ESD Rating - Human Body Model 1C Class Moisture Sensitivity Level MSL 2 Parameter Units 500MHz 850MHz 1950MHz 2400MHz 3500MHz 5800MHz Input Return Loss dB 26 26 19 15 12 12.5 Output Return Loss dB 19 17.5 12 11 10.5 10.9 Reverse Isolation d B 2 22 32 32 32 32 3 Test Conditions: VS=8V , ID=80mA T yp, OIP3 Tone Spacing=1MHz, P OUT per tone=0dBm. T L=25°C, Bias Resistance=39 , ZS=ZL=50 . Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical perfor- mance or functional operation of the device under Absolute Maximum Rating condi- tions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice. P1dB vs. Frequency 0123456 Frequency(GHz) P1dB (dBm) -40 °C +25°C +85°C OIP3 vs. Frequency 0123456 Frequency (GHz) OIP3 (dBm) -40 °C +25°C +85°C Noise Figure vs. Frequency 0123456 Frequency (GHz) NF (dB) -40°C +25°C +85°C
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com . SBW-5089(Z) RF Performance With Basic Application Circuit (Bias: ID=80mA T yp.) Note: Full S-Parameter data available at www.RFMD.com S12 vs. Frequency -30 -25 -20 -15 -10 0123456789 1 0 Frequency (GHz) |S12| (dB) -40°C +25°C +85°C IS-95 @ 850MHz Adj. Channel Pwr. vs. Channel output Pwr. -70 -65 -60 -55 -50 -45 -40 -35 -30 6 8 10 12 14 16 dBm dBc -40°C +25°C +85°C IS-95 @ 1950MHz Adj. Channel Pwr. vs. Channel Output Power -70 -65 -60 -55 -50 -45 -40 -35 -30 6 8 10 12 14 16 dBm dBc -40°C +25°C +85°C S21 vs. Frequency 0123456789 1 0 Frequency (GHz) |S21| (dB) -40°C +25°C +85°C S11 vs. Frequency -40 -35 -30 -25 -20 -15 -10 0123456789 1 0 Frequency (GHz) |S11| (dB) -40°C +25°C +85°C S22 vs. Frequency -40 -35 -30 -25 -20 -15 -10 0123456789 1 0 Frequency (GHz) |S22| (dB) -40°C +25°C +85°C
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com . SBW-5089(Z) Typical RF Performance With Tuned Application Circuit (Bias: ID=80mA T yp.) S21 vs. Frequency 0123456789 1 0 Frequency (GHz) |S21| (dB) -40°C +25°C +85°C S11 vs. Frequency -40 -30 -20 -10 0123456789 1 0 Frequency (GHz) |S11| (dB) -40°C +25°C +85°C S12 vs. Frequency -30 -25 -20 -15 -10 0123456789 1 0 Frequency (GHz) |S12| (dB) -40°C +25°C +85°C S22 vs. Frequency -40 -30 -20 -10 0123456789 1 0 Frequency (GHz) |S22| (dB) -40°C +25°C +85°C
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com . SBW-5089(Z) Application Circuit Schematic Application Circuit Layout Application Circuit Element Values Recommended Bias Resistance for ID=80mA Reference Designator 100MHz 500MHz 850MHz 1950MHz 2400MHz 3500MHz CB 1000pF 220pF 100pF 68pF 56pF 39pF CD 100pF 100pF 68pF 22pF 22pF 15pF LC 470nH 68 nH 33nH 22nH 18nH 15nH Supply Voltage (VS) (Volts) <7 7 7 .5 8 9 10 12 Bias Resistance* () N/R 26 33 39 52 64 89 RF i n RF out 1 uF CBCB CD VS RBI AS LC 1000 pF SW-5089 RLDC Bias Inductor VD ID
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com . SBW-5089(Z) Suggested Pad Layout Notes: 1. Solder the copper pad on the backside of the device package to the ground plane. 2. Provide a large ground pad area under device pins 1, 2, 4, and 5 with many plated via holes as shown. 3. Dimensions given for 50 I/O lines are for 31mil thick Getek. Scale accordingly for different board thicknesses and dielec- tric contacts. 4. We recommend 1 or 2 ounce copper. Measurements for this data sheet were made on a 31mil thick Getek with 1 ounce copper on both sides. *Bias Resistance=R BIAS + RLDC=(VS-VD)/ID Select RBIAS so that RBIAS + RLDC ~the recommended bias resistance. Use 1% or 5% tolerance resistors or parallel combinations to attain the recom- mended bias resistance ±3%. RBIAS provides current stability over temperature. *N/R=Not recommended. Contact RFMD technical support for guidance when available supply voltage is <7V. Pin Function Description 1R F I N RF input pin. This pin requires the use of an external DC-blocking capacitor chosen for the frequency of opera- tion. 2, 4 GND Connection to ground. Provide via holes as close to the device ground leads as possible to reduce ground induc- tance and achieve RF performance. 3R F O U T / D C BIAS RF output and bias pin. This pin requires the use of an external DC-blocking capacitor chosen for the frequency of operation. PCB Pad Layout Dimensions in inches [millimeters]
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com . SBW-5089(Z) Package Drawing Dimensions in inches (millimeters) Refer to drawing posted at www.rfmd.com for tolerances. Part Identification Marking Alternate marking “SBW5089” or “SBW5089Z” on line one with Trace Code on line two.
Ordering Information
Part Number Description Reel Size Devices/Reel SBW-5089 Tin-Lead 7” 1000 SBW-5089Z Lead Free, RoHS Compliant 7” 1000 BW5 3123 BW5Z1 3123