SBC6-103-161

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com One world. One KEMET Benefits

• D rum core construction N ickel-zinc (NiZn) ferrite core M agnetic non-shield type O perating temperature range of up to +105°C R oHS compliant Overview Ferrite power inductors are useful in various fields and suitable for DC/DC converters and noise filters.

Applications

Typical applications include LED lighting, xDSL modems, copying machines, flat TVs, smart meters, and power supplies. Through-Hole Inductors Conformally Coated SBC Coils

Ordering Information

SBC 1– 101− 571 Series Core Size Inductance Code (µH) Rate Current Code (mA) SBC Outer size x height 1 = Φ 4.5 × 6.5 2 = Φ 6.0 × 6.0 3 = Φ 8.0 × 7.0 4 = Φ 8.0 × 10.0 6 = Φ 11.0 × 13.0 7 = Φ 14.0 × 12.0 8 = Φ 14.0 × 17.0 9 = Φ 11.0 × 10.0 First two digits represent significant figures. Third digit specifies number of zeros. First two digits represent significant figures. Third digit specifies number of zeros. The presence of an external tube may not be indicated on the surface of sample products.

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils Dimensions – Millimeters SBC1 Part Number Lead Diameter Soft Lead Pin Lead SBC1-1R0-312 ø 0.30 - SBC1-1R5-292 ø 0.30 - SBC1-2R2-272 ø 0.30 - SBC1-3R3-232 ø 0.30 - SBC1-4R7-202 ø 0.30 - SBC1-6R8-182 ø 0.30 - SBC1-100-172 ø 0.30 - SBC1-150-162 ø 0.30 - SBC1-220-132 ø 0.28 - SBC1-330-102 ø 0.24 - SBC1-470-711 - ø 0.50 SBC1-680-651 - ø 0.50 SBC1-101-571 - ø 0.50 SBC1-151-431 - ø 0.50 SBC1-221-391 - ø 0.50 SBC1-331-341 - ø 0.50 SBC1-471-301 - ø 0.50 SBC1-561-291 - ø 0.50 SBC1-681-251 - ø 0.50 SBC1-102-211 - ø 0.50 SBC1-152-181 - ø 0.50 SBC2 Part Number Lead Diameter Soft Lead Pin Lead SBC2-1R0-612 ø 0.60 - SBC2-1R5-402 ø 0.50 - SBC2-3R3-352 ø 0.45 - SBC2-4R7-262 ø 0.40 - SBC2-6R8-242 ø 0.40 - SBC2-100-212 ø 0.40 - SBC2-150-162 ø 0.35 - SBC2-220-132 ø 0.32 - SBC2-330-112 ø 0.28 - SBC2-470-951 ø 0.28 - SBC2-680-871 ø 0.28 - SBC2-101-671 - ø 0.60 SBC2-151-501 - ø 0.60 SBC2-221-411 - ø 0.60 SBC2-331-341 - ø 0.60 SBC2-471-271 - ø 0.60 SBC2-681-211 - ø 0.60 SBC2-102-181 - ø 0.60 SBC2-152-141 - ø 0.60 SBC2-222-121 - ø 0.60 SBC2-272-101 - ø 0.60 SBC2-332-900 - ø 0.60 Shape and Dimensions [mm] +1.0 –0.5 ø5.5 max. 3.58.5 max. 1.0 max. (Non-soldered part) (3.0) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 1R0 1R0 1R0 Inductance 2.5±0.5 6.0±1.0 ø0.5 (CP wire) ø5.5 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 11.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 +1.0 –0.5 ø9.0 max. 3.59.0 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 4R7 4R7 +1.0 –0.5 ø9.0 max. 3.512 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 14.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 221 4.0±0.5 5.5±1.0 ø0.6 (CP wire) ø7.0 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 101 101 101 101 +1.0 –0.5 ø7.0 max. 3.58.0 max. 1.0 max. (4.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 Lead diam. ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.28 ø0.24 Model SBC1-1R0-312 SBC1-1R5-292 SBC1-2R2-272 SBC1-3R3-232 SBC1-4R7-202 SBC1-6R8-182 SBC1-100-172 SBC1-150-162 SBC1-220-132 SBC1-330-102 SBC3-1R2-752 SBC3-1R5-632 SBC3-2R2-602 SBC3-3R3-472 SBC3-4R7-422 SBC3-6R8-392 SBC3-100-362 SBC3-150-232 SBC3-220-202 SBC3-330-172 SBC3-470-142 SBC3-680-112 SBC3-101-961 SBC3-151-791 Model ø0.80 ø0.70 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 ø0.30 Lead diam. SBC4-1R0-742 SBC4-1R5-712 SBC4-2R7-662 SBC4-3R3-642 SBC4-4R7-582 SBC4-6R8-452 SBC4-100-292 SBC4-150-232 SBC4-220-202 SBC4-330-182 SBC4-470-162 SBC4-680-122 SBC4-101-102 SBC4-151-861 Model ø0.80 ø0.80 ø0.80 ø0.80 ø0.70 ø0.60 ø0.50 ø0.45 ø0.45 ø0.45 ø0.45 ø0.35 ø0.32 ø0.32 Lead diam. Model SBC2-1R0-612 SBC2-1R5-402 SBC2-3R3-352 SBC2-4R7-262 SBC2-6R8-242 SBC2-100-212 SBC2-150-162 SBC2-220-132 SBC2-330-112 SBC2-470-951 SBC2-680-871 Lead diam. ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.40 ø0.35 ø0.32 ø0.28 ø0.28 ø0.28 DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

2008.08.29 P0936MCCC10VOL08E

[mm] +1.0 –0.5 ø5.5 max. 3.58.5 max. 1.0 max. (Non-soldered part) (3.0) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 1R0 1R0 1R0 Inductance 2.5±0.5 6.0±1.0 ø0.5 (CP wire) ø5.5 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 11.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 +1.0 –0.5 ø9.0 max. 3.59.0 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 4R7 4R7 +1.0 –0.5 ø9.0 max. 3.512 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 14.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 221 4.0±0.5 5.5±1.0 ø0.6 (CP wire) ø7.0 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 101 101 101 101 +1.0 –0.5 ø7.0 max. 3.58.0 max. 1.0 max. (4.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 Lead diam. ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.28 ø0.24 Model SBC1-1R0-312 SBC1-1R5-292 SBC1-2R2-272 SBC1-3R3-232 SBC1-4R7-202 SBC1-6R8-182 SBC1-100-172 SBC1-150-162 SBC1-220-132 SBC1-330-102 SBC3-1R2-752 SBC3-1R5-632 SBC3-2R2-602 SBC3-3R3-472 SBC3-4R7-422 SBC3-6R8-392 SBC3-100-362 SBC3-150-232 SBC3-220-202 SBC3-330-172 SBC3-470-142 SBC3-680-112 SBC3-101-961 SBC3-151-791 Model ø0.80 ø0.70 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 ø0.30 Lead diam. SBC4-1R0-742 SBC4-1R5-712 SBC4-2R7-662 SBC4-3R3-642 SBC4-4R7-582 SBC4-6R8-452 SBC4-100-292 SBC4-150-232 SBC4-220-202 SBC4-330-182 SBC4-470-162 SBC4-680-122 SBC4-101-102 SBC4-151-861 Model ø0.80 ø0.80 ø0.80 ø0.80 ø0.70 ø0.60 ø0.50 ø0.45 ø0.45 ø0.45 ø0.45 ø0.35 ø0.32 ø0.32 Lead diam. Model SBC2-1R0-612 SBC2-1R5-402 SBC2-3R3-352 SBC2-4R7-262 SBC2-6R8-242 SBC2-100-212 SBC2-150-162 SBC2-220-132 SBC2-330-112 SBC2-470-951 SBC2-680-871 Lead diam. ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.40 ø0.35 ø0.32 ø0.28 ø0.28 ø0.28 DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø5.5 max. 3.58.5 max. 1.0 max. (Non-soldered part) (3.0) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 1R0 1R0 1R0 Inductance 2.5±0.5 6.0±1.0 ø0.5 (CP wire) ø5.5 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 11.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 +1.0 –0.5 ø9.0 max. 3.59.0 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 4R7 4R7 +1.0 –0.5 ø9.0 max. 3.512 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 14.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 221 4.0±0.5 5.5±1.0 ø0.6 (CP wire) ø7.0 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 101 101 101 101 +1.0 –0.5 ø7.0 max. 3.58.0 max. 1.0 max. (4.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 Lead diam. ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.28 ø0.24 Model SBC1-1R0-312 SBC1-1R5-292 SBC1-2R2-272 SBC1-3R3-232 SBC1-4R7-202 SBC1-6R8-182 SBC1-100-172 SBC1-150-162 SBC1-220-132 SBC1-330-102 SBC3-1R2-752 SBC3-1R5-632 SBC3-2R2-602 SBC3-3R3-472 SBC3-4R7-422 SBC3-6R8-392 SBC3-100-362 SBC3-150-232 SBC3-220-202 SBC3-330-172 SBC3-470-142 SBC3-680-112 SBC3-101-961 SBC3-151-791 Model ø0.80 ø0.70 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 ø0.30 Lead diam. SBC4-1R0-742 SBC4-1R5-712 SBC4-2R7-662 SBC4-3R3-642 SBC4-4R7-582 SBC4-6R8-452 SBC4-100-292 SBC4-150-232 SBC4-220-202 SBC4-330-182 SBC4-470-162 SBC4-680-122 SBC4-101-102 SBC4-151-861 Model ø0.80 ø0.80 ø0.80 ø0.80 ø0.70 ø0.60 ø0.50 ø0.45 ø0.45 ø0.45 ø0.45 ø0.35 ø0.32 ø0.32 Lead diam. Model SBC2-1R0-612 SBC2-1R5-402 SBC2-3R3-352 SBC2-4R7-262 SBC2-6R8-242 SBC2-100-212 SBC2-150-162 SBC2-220-132 SBC2-330-112 SBC2-470-951 SBC2-680-871 Lead diam. ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.40 ø0.35 ø0.32 ø0.28 ø0.28 ø0.28 DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø5.5 max. 3.58.5 max. 1.0 max. (Non-soldered part) (3.0) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 1R0 1R0 1R0 Inductance 2.5±0.5 6.0±1.0 ø0.5 (CP wire) ø5.5 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 11.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 +1.0 –0.5 ø9.0 max. 3.59.0 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 4R7 4R7 +1.0 –0.5 ø9.0 max. 3.512 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 14.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 221 4.0±0.5 5.5±1.0 ø0.6 (CP wire) ø7.0 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 101 101 101 101 +1.0 –0.5 ø7.0 max. 3.58.0 max. 1.0 max. (4.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 Lead diam. ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.28 ø0.24 Model SBC1-1R0-312 SBC1-1R5-292 SBC1-2R2-272 SBC1-3R3-232 SBC1-4R7-202 SBC1-6R8-182 SBC1-100-172 SBC1-150-162 SBC1-220-132 SBC1-330-102 SBC3-1R2-752 SBC3-1R5-632 SBC3-2R2-602 SBC3-3R3-472 SBC3-4R7-422 SBC3-6R8-392 SBC3-100-362 SBC3-150-232 SBC3-220-202 SBC3-330-172 SBC3-470-142 SBC3-680-112 SBC3-101-961 SBC3-151-791 Model ø0.80 ø0.70 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 ø0.30 Lead diam. SBC4-1R0-742 SBC4-1R5-712 SBC4-2R7-662 SBC4-3R3-642 SBC4-4R7-582 SBC4-6R8-452 SBC4-100-292 SBC4-150-232 SBC4-220-202 SBC4-330-182 SBC4-470-162 SBC4-680-122 SBC4-101-102 SBC4-151-861 Model ø0.80 ø0.80 ø0.80 ø0.80 ø0.70 ø0.60 ø0.50 ø0.45 ø0.45 ø0.45 ø0.45 ø0.35 ø0.32 ø0.32 Lead diam. Model SBC2-1R0-612 SBC2-1R5-402 SBC2-3R3-352 SBC2-4R7-262 SBC2-6R8-242 SBC2-100-212 SBC2-150-162 SBC2-220-132 SBC2-330-112 SBC2-470-951 SBC2-680-871 Lead diam. ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.40 ø0.35 ø0.32 ø0.28 ø0.28 ø0.28 DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils Dimensions – Millimeters cont’d SBC3 Part Number Lead Diameter Soft Lead Pin Lead SBC3-1R2-752 ø 0.80 - SBC3-1R5-632 ø 0.70 - SBC3-2R2-602 ø 0.70 - SBC3-3R3-472 ø 0.60 - SBC3-4R7-422 ø 0.60 - SBC3-6R8-392 ø 0.60 - SBC3-100-362 ø 0.60 - SBC3-150-232 ø 0.50 - SBC3-220-202 ø 0.45 - SBC3-330-172 ø 0.40 - SBC3-470-142 ø 0.40 - SBC3-680-112 ø 0.35 - SBC3-101-961 ø 0.32 - SBC3-151-791 ø 0.30 - SBC3-221-681 - ø 0.60 SBC3-331-551 - ø 0.60 SBC3-471-491 - ø 0.60 SBC3-561-421 - ø 0.60 SBC3-681-361 - ø 0.60 SBC3-102-281 - ø 0.60 SBC3-122-281 - ø 0.60 SBC3-152-251 - ø 0.60 SBC3-222-191 - ø 0.60 SBC3-332-151 - ø 0.60 SBC3-472-121 - ø 0.60 SBC3-682-111 - ø 0.60 SBC4 Part Number Lead Diameter Soft Lead Pin Lead SBC4-1R0-742 ø 0.80 - SBC4-1R5-712 ø 0.80 - SBC4-2R7-662 ø 0.80 - SBC4-3R3-642 ø 0.80 - SBC4-4R7-582 ø 0.70 - SBC4-6R8-452 ø 0.60 - SBC4-100-292 ø 0.50 - SBC4-150-232 ø 0.45 - SBC4-220-202 ø 0.45 - SBC4-330-182 ø 0.45 - SBC4-470-162 ø 0.45 - SBC4-680-122 ø 0.35 - SBC4-101-102 ø 0.32 - SBC4-151-861 ø 0.32 - SBC4-221-721 - ø 0.60 SBC4-331-591 - ø 0.60 SBC4-471-491 - ø 0.60 SBC4-681-431 - ø 0.60 SBC4-102-291 - ø 0.60 SBC4-152-221 - ø 0.60 SBC4-222-211 - ø 0.60 SBC4-332-161 - ø 0.60 SBC4-472-141 - ø 0.60 SBC4-682-111 - ø 0.60 SBC4-103-111 - ø 0.60 Shape and Dimensions [mm] +1.0 –0.5 ø5.5 max. 3.58.5 max. 1.0 max. (Non-soldered part) (3.0) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 1R0 1R0 1R0 Inductance 2.5±0.5 6.0±1.0 ø0.5 (CP wire) ø5.5 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 11.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 +1.0 –0.5 ø9.0 max. 3.59.0 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 4R7 4R7 +1.0 –0.5 ø9.0 max. 3.512 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 14.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 221 4.0±0.5 5.5±1.0 ø0.6 (CP wire) ø7.0 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 101 101 101 101 +1.0 –0.5 ø7.0 max. 3.58.0 max. 1.0 max. (4.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 Lead diam. ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.28 ø0.24 Model SBC1-1R0-312 SBC1-1R5-292 SBC1-2R2-272 SBC1-3R3-232 SBC1-4R7-202 SBC1-6R8-182 SBC1-100-172 SBC1-150-162 SBC1-220-132 SBC1-330-102 SBC3-1R2-752 SBC3-1R5-632 SBC3-2R2-602 SBC3-3R3-472 SBC3-4R7-422 SBC3-6R8-392 SBC3-100-362 SBC3-150-232 SBC3-220-202 SBC3-330-172 SBC3-470-142 SBC3-680-112 SBC3-101-961 SBC3-151-791 Model ø0.80 ø0.70 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 ø0.30 Lead diam. SBC4-1R0-742 SBC4-1R5-712 SBC4-2R7-662 SBC4-3R3-642 SBC4-4R7-582 SBC4-6R8-452 SBC4-100-292 SBC4-150-232 SBC4-220-202 SBC4-330-182 SBC4-470-162 SBC4-680-122 SBC4-101-102 SBC4-151-861 Model ø0.80 ø0.80 ø0.80 ø0.80 ø0.70 ø0.60 ø0.50 ø0.45 ø0.45 ø0.45 ø0.45 ø0.35 ø0.32 ø0.32 Lead diam. Model SBC2-1R0-612 SBC2-1R5-402 SBC2-3R3-352 SBC2-4R7-262 SBC2-6R8-242 SBC2-100-212 SBC2-150-162 SBC2-220-132 SBC2-330-112 SBC2-470-951 SBC2-680-871 Lead diam. ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.40 ø0.35 ø0.32 ø0.28 ø0.28 ø0.28 DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø5.5 max. 3.58.5 max. 1.0 max. (Non-soldered part) (3.0) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 1R0 1R0 1R0 Inductance 2.5±0.5 6.0±1.0 ø0.5 (CP wire) ø5.5 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 11.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 +1.0 –0.5 ø9.0 max. 3.59.0 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 4R7 4R7 +1.0 –0.5 ø9.0 max. 3.512 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 14.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 221 4.0±0.5 5.5±1.0 ø0.6 (CP wire) ø7.0 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 101 101 101 101 +1.0 –0.5 ø7.0 max. 3.58.0 max. 1.0 max. (4.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 Lead diam. ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.28 ø0.24 Model SBC1-1R0-312 SBC1-1R5-292 SBC1-2R2-272 SBC1-3R3-232 SBC1-4R7-202 SBC1-6R8-182 SBC1-100-172 SBC1-150-162 SBC1-220-132 SBC1-330-102 SBC3-1R2-752 SBC3-1R5-632 SBC3-2R2-602 SBC3-3R3-472 SBC3-4R7-422 SBC3-6R8-392 SBC3-100-362 SBC3-150-232 SBC3-220-202 SBC3-330-172 SBC3-470-142 SBC3-680-112 SBC3-101-961 SBC3-151-791 Model ø0.80 ø0.70 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 ø0.30 Lead diam. SBC4-1R0-742 SBC4-1R5-712 SBC4-2R7-662 SBC4-3R3-642 SBC4-4R7-582 SBC4-6R8-452 SBC4-100-292 SBC4-150-232 SBC4-220-202 SBC4-330-182 SBC4-470-162 SBC4-680-122 SBC4-101-102 SBC4-151-861 Model ø0.80 ø0.80 ø0.80 ø0.80 ø0.70 ø0.60 ø0.50 ø0.45 ø0.45 ø0.45 ø0.45 ø0.35 ø0.32 ø0.32 Lead diam. Model SBC2-1R0-612 SBC2-1R5-402 SBC2-3R3-352 SBC2-4R7-262 SBC2-6R8-242 SBC2-100-212 SBC2-150-162 SBC2-220-132 SBC2-330-112 SBC2-470-951 SBC2-680-871 Lead diam. ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.40 ø0.35 ø0.32 ø0.28 ø0.28 ø0.28 DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø5.5 max. 3.58.5 max. 1.0 max. (Non-soldered part) (3.0) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 1R0 1R0 1R0 Inductance 2.5±0.5 6.0±1.0 ø0.5 (CP wire) ø5.5 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 11.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 +1.0 –0.5 ø9.0 max. 3.59.0 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 4R7 4R7 +1.0 –0.5 ø9.0 max. 3.512 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 14.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 221 4.0±0.5 5.5±1.0 ø0.6 (CP wire) ø7.0 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 101 101 101 101 +1.0 –0.5 ø7.0 max. 3.58.0 max. 1.0 max. (4.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 Lead diam. ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.28 ø0.24 Model SBC1-1R0-312 SBC1-1R5-292 SBC1-2R2-272 SBC1-3R3-232 SBC1-4R7-202 SBC1-6R8-182 SBC1-100-172 SBC1-150-162 SBC1-220-132 SBC1-330-102 SBC3-1R2-752 SBC3-1R5-632 SBC3-2R2-602 SBC3-3R3-472 SBC3-4R7-422 SBC3-6R8-392 SBC3-100-362 SBC3-150-232 SBC3-220-202 SBC3-330-172 SBC3-470-142 SBC3-680-112 SBC3-101-961 SBC3-151-791 Model ø0.80 ø0.70 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 ø0.30 Lead diam. SBC4-1R0-742 SBC4-1R5-712 SBC4-2R7-662 SBC4-3R3-642 SBC4-4R7-582 SBC4-6R8-452 SBC4-100-292 SBC4-150-232 SBC4-220-202 SBC4-330-182 SBC4-470-162 SBC4-680-122 SBC4-101-102 SBC4-151-861 Model ø0.80 ø0.80 ø0.80 ø0.80 ø0.70 ø0.60 ø0.50 ø0.45 ø0.45 ø0.45 ø0.45 ø0.35 ø0.32 ø0.32 Lead diam. Model SBC2-1R0-612 SBC2-1R5-402 SBC2-3R3-352 SBC2-4R7-262 SBC2-6R8-242 SBC2-100-212 SBC2-150-162 SBC2-220-132 SBC2-330-112 SBC2-470-951 SBC2-680-871 Lead diam. ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.40 ø0.35 ø0.32 ø0.28 ø0.28 ø0.28 DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø5.5 max. 3.58.5 max. 1.0 max. (Non-soldered part) (3.0) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. 1R0 1R0 1R0 Inductance 2.5±0.5 6.0±1.0 ø0.5 (CP wire) ø5.5 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 11.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 +1.0 –0.5 ø9.0 max. 3.59.0 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 4R7 4R7 +1.0 –0.5 ø9.0 max. 3.512 max. 1.0 max. (5.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 5.0±0.5 5.0±1.0 ø0.6 (CP wire) ø9.0 max. 14.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 221 221 221 221 4.0±0.5 5.5±1.0 ø0.6 (CP wire) ø7.0 max. 10.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 101 101 101 101 +1.0 –0.5 ø7.0 max. 3.58.0 max. 1.0 max. (4.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 Lead diam. ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.30 ø0.28 ø0.24 Model SBC1-1R0-312 SBC1-1R5-292 SBC1-2R2-272 SBC1-3R3-232 SBC1-4R7-202 SBC1-6R8-182 SBC1-100-172 SBC1-150-162 SBC1-220-132 SBC1-330-102 SBC3-1R2-752 SBC3-1R5-632 SBC3-2R2-602 SBC3-3R3-472 SBC3-4R7-422 SBC3-6R8-392 SBC3-100-362 SBC3-150-232 SBC3-220-202 SBC3-330-172 SBC3-470-142 SBC3-680-112 SBC3-101-961 SBC3-151-791 Model ø0.80 ø0.70 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 ø0.30 Lead diam. SBC4-1R0-742 SBC4-1R5-712 SBC4-2R7-662 SBC4-3R3-642 SBC4-4R7-582 SBC4-6R8-452 SBC4-100-292 SBC4-150-232 SBC4-220-202 SBC4-330-182 SBC4-470-162 SBC4-680-122 SBC4-101-102 SBC4-151-861 Model ø0.80 ø0.80 ø0.80 ø0.80 ø0.70 ø0.60 ø0.50 ø0.45 ø0.45 ø0.45 ø0.45 ø0.35 ø0.32 ø0.32 Lead diam. Model SBC2-1R0-612 SBC2-1R5-402 SBC2-3R3-352 SBC2-4R7-262 SBC2-6R8-242 SBC2-100-212 SBC2-150-162 SBC2-220-132 SBC2-330-112 SBC2-470-951 SBC2-680-871 Lead diam. ø0.60 ø0.50 ø0.45 ø0.40 ø0.40 ø0.40 ø0.35 ø0.32 ø0.28 ø0.28 ø0.28 DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils Dimensions – Millimeters cont’d SBC6 Part Number Lead Diameter Soft Lead Pin Lead SBC6-1R0-962 ø 1.20 - SBC6-1R5-942 ø 1.20 - SBC6-2R7-872 ø 1.20 - SBC6-3R3-852 ø 1.20 - SBC6-4R7-802 ø 1.20 - SBC6-6R8-662 ø 1.00 - SBC6-100-462 ø 0.80 - SBC6-150-382 ø 0.70 - SBC6-220-302 ø 0.60 - SBC6-330-272 ø 0.60 - SBC6-470-232 ø 0.60 - SBC6-680-222 ø 0.60 - SBC6-101-172 ø 0.55 - SBC6-151-122 ø 0.45 - SBC6-221-112 ø 0.40 - SBC6-331-871 ø 0.40 - SBC6-471-701 ø 0.35 - SBC6-681-631 - ø 0.80 SBC6-102-561 - ø 0.80 SBC6-152-451 - ø 0.80 SBC6-222-351 - ø 0.80 SBC6-332-281 - ø 0.80 SBC6-472-241 - ø 0.80 SBC6-682-181 - ø 0.80 SBC6-103-161 - ø 0.80 SBC7 Part Number Lead Diameter Soft Lead Pin Lead SBC7-6R8-612 ø 0.90 - SBC7-100-532 ø 0.90 - SBC7-150-482 ø 0.90 - SBC7-220-432 ø 0.90 - SBC7-330-342 ø 0.80 - SBC7-470-282 ø 0.70 - SBC7-680-222 ø 0.60 - SBC7-101-192 ø 0.60 - SBC7-151-172 ø 0.60 - SBC7-221-132 ø 0.50 - SBC7-331-941 ø 0.40 - SBC7-471-851 ø 0.40 - SBC7-681-701 ø 0.35 - SBC7-102-541 - ø 1.00 SBC7-152-481 - ø 1.00 SBC7-222-421 - ø 1.00 SBC7-332-361 - ø 1.00 SBC7-472-281 - ø 1.00 SBC7-682-211 - ø 1.00 SBC7-103-191 - ø 1.00 DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø12 max. 3.515 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 10±0.5 8.5±1.0 ø1.0 (CP wire) ø15 max. 22.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 152 152 152 +1.0 –0.5 ø12 max. 3.512 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 2R2 2R2 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 18.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 681 681 681 681 +1.0 –0.5 ø15 max. 3.519 max. 1.0 max. (10.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 6R8 6R8 6R8 6R8 +1.0 –0.5 ø15 max. 3.514 max. 1.0 max. (10) (Non-soldered) part [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R2 1R2 8.5±1.0 10.0±0.5 ø1.0 (CP wire) ø15 max. 17.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 102 102 102 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 15.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 SBC6-1R0-962 SBC6-1R5-942 SBC6-2R7-872 SBC6-3R3-852 SBC6-4R7-802 SBC6-6R8-662 SBC6-100-462 SBC6-150-382 SBC6-220-302 SBC6-330-272 SBC6-470-232 SBC6-680-222 SBC6-101-172 SBC6-151-122 SBC6-221-112 SBC6-331-871 SBC6-471-701 Model ø1.20 ø1.20 ø1.20 ø1.20 ø1.20 ø1.00 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 Lead diam. SBC8-6R8-862 SBC8-100-692 SBC8-150-532 SBC8-220-492 SBC8-330-452 SBC8-470-372 SBC8-680-322 SBC8-101-242 SBC8-151-202 SBC8-221-182 SBC8-331-142 SBC8-471-112 SBC8-681-102 SBC8-102-761 Model ø1.20 ø1.00 ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.55 ø0.45 ø0.45 ø0.40 Lead diam. SBC9-1R0-982 SBC9-1R5-942 SBC9-2R2-792 SBC9-3R3-622 SBC9-4R7-562 SBC9-6R8-492 SBC9-100-422 SBC9-150-362 SBC9-220-312 SBC9-330-252 SBC9-470-202 SBC9-680-152 SBC9-101-122 SBC9-151-112 SBC9-221-821 SBC9-331-671 Model ø1.20 ø1.20 ø1.00 ø0.90 ø0.80 ø0.70 ø0.70 ø0.70 ø0.70 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 Lead diam. SBC7-6R8-612 SBC7-100-532 SBC7-150-482 SBC7-220-432 SBC7-330-342 SBC7-470-282 SBC7-680-222 SBC7-101-192 SBC7-151-172 SBC7-221-132 SBC7-331-941 SBC7-471-851 SBC7-681-701 Model ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.50 ø0.40 ø0.40 ø0.35 Lead diam. Numbering System SBC 1 - 101 - 571 ① Series Core size Model numbers and Core sizes The model numbers are classified according to core size as shown below. Inductance: Rated current: *The presence of an external tube may not be indicated on the surface of sample products. ③ 10×10 /L50300/L50300 /L50300 =100（μH） ④ 57×10 /L50300/L50300 /L50300 =570（mA） SBC1 Series ø4.5/L11546.5 SBC2 Series ø6.0/L11546.0 SBC3 Series ø8.0/L11547.0 SBC4 Series ø8.0/L115410.0 SBC6 Series ø11.0/L115413.0 SBC7 Series ø14.0/L115412.0 SBC8 Series ø14.0/L115417.0 SBC9 Series ø11.0/L115410.0 Core size [mm]Model DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø12 max. 3.515 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 10±0.5 8.5±1.0 ø1.0 (CP wire) ø15 max. 22.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 152 152 152 +1.0 –0.5 ø12 max. 3.512 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 2R2 2R2 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 18.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 681 681 681 681 +1.0 –0.5 ø15 max. 3.519 max. 1.0 max. (10.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 6R8 6R8 6R8 6R8 +1.0 –0.5 ø15 max. 3.514 max. 1.0 max. (10) (Non-soldered) part [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R2 1R2 8.5±1.0 10.0±0.5 ø1.0 (CP wire) ø15 max. 17.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 102 102 102 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 15.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 SBC6-1R0-962 SBC6-1R5-942 SBC6-2R7-872 SBC6-3R3-852 SBC6-4R7-802 SBC6-6R8-662 SBC6-100-462 SBC6-150-382 SBC6-220-302 SBC6-330-272 SBC6-470-232 SBC6-680-222 SBC6-101-172 SBC6-151-122 SBC6-221-112 SBC6-331-871 SBC6-471-701 Model ø1.20 ø1.20 ø1.20 ø1.20 ø1.20 ø1.00 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 Lead diam. SBC8-6R8-862 SBC8-100-692 SBC8-150-532 SBC8-220-492 SBC8-330-452 SBC8-470-372 SBC8-680-322 SBC8-101-242 SBC8-151-202 SBC8-221-182 SBC8-331-142 SBC8-471-112 SBC8-681-102 SBC8-102-761 Model ø1.20 ø1.00 ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.55 ø0.45 ø0.45 ø0.40 Lead diam. SBC9-1R0-982 SBC9-1R5-942 SBC9-2R2-792 SBC9-3R3-622 SBC9-4R7-562 SBC9-6R8-492 SBC9-100-422 SBC9-150-362 SBC9-220-312 SBC9-330-252 SBC9-470-202 SBC9-680-152 SBC9-101-122 SBC9-151-112 SBC9-221-821 SBC9-331-671 Model ø1.20 ø1.20 ø1.00 ø0.90 ø0.80 ø0.70 ø0.70 ø0.70 ø0.70 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 Lead diam. SBC7-6R8-612 SBC7-100-532 SBC7-150-482 SBC7-220-432 SBC7-330-342 SBC7-470-282 SBC7-680-222 SBC7-101-192 SBC7-151-172 SBC7-221-132 SBC7-331-941 SBC7-471-851 SBC7-681-701 Model ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.50 ø0.40 ø0.40 ø0.35 Lead diam. Numbering System SBC 1 - 101 - 571 ① Series Core size Model numbers and Core sizes The model numbers are classified according to core size as shown below. Inductance: Rated current: *The presence of an external tube may not be indicated on the surface of sample products. ③ 10×10 /L50300/L50300 /L50300 =100（μH） ④ 57×10 /L50300/L50300 /L50300 =570（mA） SBC1 Series ø4.5/L11546.5 SBC2 Series ø6.0/L11546.0 SBC3 Series ø8.0/L11547.0 SBC4 Series ø8.0/L115410.0 SBC6 Series ø11.0/L115413.0 SBC7 Series ø14.0/L115412.0 SBC8 Series ø14.0/L115417.0 SBC9 Series ø11.0/L115410.0 Core size [mm]Model DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø12 max. 3.515 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 10±0.5 8.5±1.0 ø1.0 (CP wire) ø15 max. 22.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 152 152 152 +1.0 –0.5 ø12 max. 3.512 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 2R2 2R2 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 18.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 681 681 681 681 +1.0 –0.5 ø15 max. 3.519 max. 1.0 max. (10.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 6R8 6R8 6R8 6R8 +1.0 –0.5 ø15 max. 3.514 max. 1.0 max. (10) (Non-soldered) part [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R2 1R2 8.5±1.0 10.0±0.5 ø1.0 (CP wire) ø15 max. 17.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 102 102 102 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 15.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 SBC6-1R0-962 SBC6-1R5-942 SBC6-2R7-872 SBC6-3R3-852 SBC6-4R7-802 SBC6-6R8-662 SBC6-100-462 SBC6-150-382 SBC6-220-302 SBC6-330-272 SBC6-470-232 SBC6-680-222 SBC6-101-172 SBC6-151-122 SBC6-221-112 SBC6-331-871 SBC6-471-701 Model ø1.20 ø1.20 ø1.20 ø1.20 ø1.20 ø1.00 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 Lead diam. SBC8-6R8-862 SBC8-100-692 SBC8-150-532 SBC8-220-492 SBC8-330-452 SBC8-470-372 SBC8-680-322 SBC8-101-242 SBC8-151-202 SBC8-221-182 SBC8-331-142 SBC8-471-112 SBC8-681-102 SBC8-102-761 Model ø1.20 ø1.00 ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.55 ø0.45 ø0.45 ø0.40 Lead diam. SBC9-1R0-982 SBC9-1R5-942 SBC9-2R2-792 SBC9-3R3-622 SBC9-4R7-562 SBC9-6R8-492 SBC9-100-422 SBC9-150-362 SBC9-220-312 SBC9-330-252 SBC9-470-202 SBC9-680-152 SBC9-101-122 SBC9-151-112 SBC9-221-821 SBC9-331-671 Model ø1.20 ø1.20 ø1.00 ø0.90 ø0.80 ø0.70 ø0.70 ø0.70 ø0.70 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 Lead diam. SBC7-6R8-612 SBC7-100-532 SBC7-150-482 SBC7-220-432 SBC7-330-342 SBC7-470-282 SBC7-680-222 SBC7-101-192 SBC7-151-172 SBC7-221-132 SBC7-331-941 SBC7-471-851 SBC7-681-701 Model ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.50 ø0.40 ø0.40 ø0.35 Lead diam. Numbering System SBC 1 - 101 - 571 ① Series Core size Model numbers and Core sizes The model numbers are classified according to core size as shown below. Inductance: Rated current: *The presence of an external tube may not be indicated on the surface of sample products. ③ 10×10 /L50300/L50300 /L50300 =100（μH） ④ 57×10 /L50300/L50300 /L50300 =570（mA） SBC1 Series ø4.5/L11546.5 SBC2 Series ø6.0/L11546.0 SBC3 Series ø8.0/L11547.0 SBC4 Series ø8.0/L115410.0 SBC6 Series ø11.0/L115413.0 SBC7 Series ø14.0/L115412.0 SBC8 Series ø14.0/L115417.0 SBC9 Series ø11.0/L115410.0 Core size [mm]Model DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø12 max. 3.515 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 10±0.5 8.5±1.0 ø1.0 (CP wire) ø15 max. 22.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 152 152 152 +1.0 –0.5 ø12 max. 3.512 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 2R2 2R2 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 18.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 681 681 681 681 +1.0 –0.5 ø15 max. 3.519 max. 1.0 max. (10.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 6R8 6R8 6R8 6R8 +1.0 –0.5 ø15 max. 3.514 max. 1.0 max. (10) (Non-soldered) part [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R2 1R2 8.5±1.0 10.0±0.5 ø1.0 (CP wire) ø15 max. 17.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 102 102 102 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 15.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 SBC6-1R0-962 SBC6-1R5-942 SBC6-2R7-872 SBC6-3R3-852 SBC6-4R7-802 SBC6-6R8-662 SBC6-100-462 SBC6-150-382 SBC6-220-302 SBC6-330-272 SBC6-470-232 SBC6-680-222 SBC6-101-172 SBC6-151-122 SBC6-221-112 SBC6-331-871 SBC6-471-701 Model ø1.20 ø1.20 ø1.20 ø1.20 ø1.20 ø1.00 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 Lead diam. SBC8-6R8-862 SBC8-100-692 SBC8-150-532 SBC8-220-492 SBC8-330-452 SBC8-470-372 SBC8-680-322 SBC8-101-242 SBC8-151-202 SBC8-221-182 SBC8-331-142 SBC8-471-112 SBC8-681-102 SBC8-102-761 Model ø1.20 ø1.00 ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.55 ø0.45 ø0.45 ø0.40 Lead diam. SBC9-1R0-982 SBC9-1R5-942 SBC9-2R2-792 SBC9-3R3-622 SBC9-4R7-562 SBC9-6R8-492 SBC9-100-422 SBC9-150-362 SBC9-220-312 SBC9-330-252 SBC9-470-202 SBC9-680-152 SBC9-101-122 SBC9-151-112 SBC9-221-821 SBC9-331-671 Model ø1.20 ø1.20 ø1.00 ø0.90 ø0.80 ø0.70 ø0.70 ø0.70 ø0.70 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 Lead diam. SBC7-6R8-612 SBC7-100-532 SBC7-150-482 SBC7-220-432 SBC7-330-342 SBC7-470-282 SBC7-680-222 SBC7-101-192 SBC7-151-172 SBC7-221-132 SBC7-331-941 SBC7-471-851 SBC7-681-701 Model ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.50 ø0.40 ø0.40 ø0.35 Lead diam. Numbering System SBC 1 - 101 - 571 ① Series Core size Model numbers and Core sizes The model numbers are classified according to core size as shown below. Inductance: Rated current: *The presence of an external tube may not be indicated on the surface of sample products. ③ 10×10 /L50300/L50300 /L50300 =100（μH） ④ 57×10 /L50300/L50300 /L50300 =570（mA） SBC1 Series ø4.5/L11546.5 SBC2 Series ø6.0/L11546.0 SBC3 Series ø8.0/L11547.0 SBC4 Series ø8.0/L115410.0 SBC6 Series ø11.0/L115413.0 SBC7 Series ø14.0/L115412.0 SBC8 Series ø14.0/L115417.0 SBC9 Series ø11.0/L115410.0 Core size [mm]Model

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils Dimensions – Millimeters cont’d SBC8 Part Number Lead Diameter Soft Lead Pin Lead SBC8-4R7-922 ø 1.40 - SBC8-6R8-862 ø 1.20 - SBC8-100-692 ø 1.00 - SBC8-150-532 ø 0.90 - SBC8-220-492 ø 0.90 - SBC8-330-452 ø 0.90 - SBC8-470-372 ø 0.90 - SBC8-680-322 ø 0.80 - SBC8-820-262 ø 0.70 - SBC8-101-242 ø 0.70 - SBC8-151-202 ø 0.60 - SBC8-221-182 ø 0.60 - SBC8-331-142 ø 0.55 - SBC8-391-122 ø 0.50 - SBC8-471-112 ø 0.45 - SBC8-681-102 ø 0.45 - SBC8-102-761 ø 0.40 - SBC8-152-581 - ø 1.00 SBC8-222-471 - ø 1.00 SBC8-332-421 - ø 1.00 SBC8-472-391 - ø 1.00 SBC8-682-311 - ø 1.00 SBC8-103-251 - ø 1.00 SBC9 Part Number Lead Diameter Soft Lead Pin Lead SBC9-1R0-982 ø 1.20 - SBC9-1R5-942 ø 1.20 - SBC9-2R2-792 ø 1.00 - SBC9-3R3-622 ø 0.90 - SBC9-4R7-562 ø 0.80 - SBC9-6R8-492 ø 0.70 - SBC9-100-422 ø 0.70 - SBC9-150-362 ø 0.70 - SBC9-220-312 ø 0.70 - SBC9-330-252 ø 0.60 - SBC9-470-202 ø 0.55 - SBC9-560-182 ø 0.50 - SBC9-680-152 ø 0.45 - SBC9-101-122 ø 0.40 - SBC9-151-112 ø 0.40 - SBC9-221-821 ø 0.35 - SBC9-331-671 ø 0.32 - SBC9-471-601 - ø 0.80 SBC9-681-551 - ø 0.80 SBC9-102-451 - ø 0.80 SBC9-152-341 - ø 0.80 SBC9-222-271 - ø 0.80 SBC9-332-221 - ø 0.80 SBC9-472-181 - ø 0.80 SBC9-682-141 - ø 0.80 SBC9-103-121 - ø 0.80 DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø12 max. 3.515 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 10±0.5 8.5±1.0 ø1.0 (CP wire) ø15 max. 22.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 152 152 152 +1.0 –0.5 ø12 max. 3.512 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 2R2 2R2 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 18.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 681 681 681 681 +1.0 –0.5 ø15 max. 3.519 max. 1.0 max. (10.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 6R8 6R8 6R8 6R8 +1.0 –0.5 ø15 max. 3.514 max. 1.0 max. (10) (Non-soldered) part [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R2 1R2 8.5±1.0 10.0±0.5 ø1.0 (CP wire) ø15 max. 17.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 102 102 102 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 15.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 SBC6-1R0-962 SBC6-1R5-942 SBC6-2R7-872 SBC6-3R3-852 SBC6-4R7-802 SBC6-6R8-662 SBC6-100-462 SBC6-150-382 SBC6-220-302 SBC6-330-272 SBC6-470-232 SBC6-680-222 SBC6-101-172 SBC6-151-122 SBC6-221-112 SBC6-331-871 SBC6-471-701 Model ø1.20 ø1.20 ø1.20 ø1.20 ø1.20 ø1.00 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 Lead diam. SBC8-6R8-862 SBC8-100-692 SBC8-150-532 SBC8-220-492 SBC8-330-452 SBC8-470-372 SBC8-680-322 SBC8-101-242 SBC8-151-202 SBC8-221-182 SBC8-331-142 SBC8-471-112 SBC8-681-102 SBC8-102-761 Model ø1.20 ø1.00 ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.55 ø0.45 ø0.45 ø0.40 Lead diam. SBC9-1R0-982 SBC9-1R5-942 SBC9-2R2-792 SBC9-3R3-622 SBC9-4R7-562 SBC9-6R8-492 SBC9-100-422 SBC9-150-362 SBC9-220-312 SBC9-330-252 SBC9-470-202 SBC9-680-152 SBC9-101-122 SBC9-151-112 SBC9-221-821 SBC9-331-671 Model ø1.20 ø1.20 ø1.00 ø0.90 ø0.80 ø0.70 ø0.70 ø0.70 ø0.70 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 Lead diam. SBC7-6R8-612 SBC7-100-532 SBC7-150-482 SBC7-220-432 SBC7-330-342 SBC7-470-282 SBC7-680-222 SBC7-101-192 SBC7-151-172 SBC7-221-132 SBC7-331-941 SBC7-471-851 SBC7-681-701 Model ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.50 ø0.40 ø0.40 ø0.35 Lead diam. Numbering System SBC 1 - 101 - 571 ① Series Core size Model numbers and Core sizes The model numbers are classified according to core size as shown below. Inductance: Rated current: *The presence of an external tube may not be indicated on the surface of sample products. ③ 10×10 /L50300/L50300 /L50300 =100（μH） ④ 57×10 /L50300/L50300 /L50300 =570（mA） SBC1 Series ø4.5/L11546.5 SBC2 Series ø6.0/L11546.0 SBC3 Series ø8.0/L11547.0 SBC4 Series ø8.0/L115410.0 SBC6 Series ø11.0/L115413.0 SBC7 Series ø14.0/L115412.0 SBC8 Series ø14.0/L115417.0 SBC9 Series ø11.0/L115410.0 Core size [mm]Model DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø12 max. 3.515 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 10±0.5 8.5±1.0 ø1.0 (CP wire) ø15 max. 22.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 152 152 152 +1.0 –0.5 ø12 max. 3.512 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 2R2 2R2 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 18.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 681 681 681 681 +1.0 –0.5 ø15 max. 3.519 max. 1.0 max. (10.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 6R8 6R8 6R8 6R8 +1.0 –0.5 ø15 max. 3.514 max. 1.0 max. (10) (Non-soldered) part [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R2 1R2 8.5±1.0 10.0±0.5 ø1.0 (CP wire) ø15 max. 17.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 102 102 102 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 15.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 SBC6-1R0-962 SBC6-1R5-942 SBC6-2R7-872 SBC6-3R3-852 SBC6-4R7-802 SBC6-6R8-662 SBC6-100-462 SBC6-150-382 SBC6-220-302 SBC6-330-272 SBC6-470-232 SBC6-680-222 SBC6-101-172 SBC6-151-122 SBC6-221-112 SBC6-331-871 SBC6-471-701 Model ø1.20 ø1.20 ø1.20 ø1.20 ø1.20 ø1.00 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 Lead diam. SBC8-6R8-862 SBC8-100-692 SBC8-150-532 SBC8-220-492 SBC8-330-452 SBC8-470-372 SBC8-680-322 SBC8-101-242 SBC8-151-202 SBC8-221-182 SBC8-331-142 SBC8-471-112 SBC8-681-102 SBC8-102-761 Model ø1.20 ø1.00 ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.55 ø0.45 ø0.45 ø0.40 Lead diam. SBC9-1R0-982 SBC9-1R5-942 SBC9-2R2-792 SBC9-3R3-622 SBC9-4R7-562 SBC9-6R8-492 SBC9-100-422 SBC9-150-362 SBC9-220-312 SBC9-330-252 SBC9-470-202 SBC9-680-152 SBC9-101-122 SBC9-151-112 SBC9-221-821 SBC9-331-671 Model ø1.20 ø1.20 ø1.00 ø0.90 ø0.80 ø0.70 ø0.70 ø0.70 ø0.70 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 Lead diam. SBC7-6R8-612 SBC7-100-532 SBC7-150-482 SBC7-220-432 SBC7-330-342 SBC7-470-282 SBC7-680-222 SBC7-101-192 SBC7-151-172 SBC7-221-132 SBC7-331-941 SBC7-471-851 SBC7-681-701 Model ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.50 ø0.40 ø0.40 ø0.35 Lead diam. Numbering System SBC 1 - 101 - 571 ① Series Core size Model numbers and Core sizes The model numbers are classified according to core size as shown below. Inductance: Rated current: *The presence of an external tube may not be indicated on the surface of sample products. ③ 10×10 /L50300/L50300 /L50300 =100（μH） ④ 57×10 /L50300/L50300 /L50300 =570（mA） SBC1 Series ø4.5/L11546.5 SBC2 Series ø6.0/L11546.0 SBC3 Series ø8.0/L11547.0 SBC4 Series ø8.0/L115410.0 SBC6 Series ø11.0/L115413.0 SBC7 Series ø14.0/L115412.0 SBC8 Series ø14.0/L115417.0 SBC9 Series ø11.0/L115410.0 Core size [mm]Model DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø12 max. 3.515 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 10±0.5 8.5±1.0 ø1.0 (CP wire) ø15 max. 22.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 152 152 152 +1.0 –0.5 ø12 max. 3.512 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 2R2 2R2 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 18.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 681 681 681 681 +1.0 –0.5 ø15 max. 3.519 max. 1.0 max. (10.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 6R8 6R8 6R8 6R8 +1.0 –0.5 ø15 max. 3.514 max. 1.0 max. (10) (Non-soldered) part [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R2 1R2 8.5±1.0 10.0±0.5 ø1.0 (CP wire) ø15 max. 17.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 102 102 102 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 15.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 SBC6-1R0-962 SBC6-1R5-942 SBC6-2R7-872 SBC6-3R3-852 SBC6-4R7-802 SBC6-6R8-662 SBC6-100-462 SBC6-150-382 SBC6-220-302 SBC6-330-272 SBC6-470-232 SBC6-680-222 SBC6-101-172 SBC6-151-122 SBC6-221-112 SBC6-331-871 SBC6-471-701 Model ø1.20 ø1.20 ø1.20 ø1.20 ø1.20 ø1.00 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 Lead diam. SBC8-6R8-862 SBC8-100-692 SBC8-150-532 SBC8-220-492 SBC8-330-452 SBC8-470-372 SBC8-680-322 SBC8-101-242 SBC8-151-202 SBC8-221-182 SBC8-331-142 SBC8-471-112 SBC8-681-102 SBC8-102-761 Model ø1.20 ø1.00 ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.55 ø0.45 ø0.45 ø0.40 Lead diam. SBC9-1R0-982 SBC9-1R5-942 SBC9-2R2-792 SBC9-3R3-622 SBC9-4R7-562 SBC9-6R8-492 SBC9-100-422 SBC9-150-362 SBC9-220-312 SBC9-330-252 SBC9-470-202 SBC9-680-152 SBC9-101-122 SBC9-151-112 SBC9-221-821 SBC9-331-671 Model ø1.20 ø1.20 ø1.00 ø0.90 ø0.80 ø0.70 ø0.70 ø0.70 ø0.70 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 Lead diam. SBC7-6R8-612 SBC7-100-532 SBC7-150-482 SBC7-220-432 SBC7-330-342 SBC7-470-282 SBC7-680-222 SBC7-101-192 SBC7-151-172 SBC7-221-132 SBC7-331-941 SBC7-471-851 SBC7-681-701 Model ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.50 ø0.40 ø0.40 ø0.35 Lead diam. Numbering System SBC 1 - 101 - 571 ① Series Core size Model numbers and Core sizes The model numbers are classified according to core size as shown below. Inductance: Rated current: *The presence of an external tube may not be indicated on the surface of sample products. ③ 10×10 /L50300/L50300 /L50300 =100（μH） ④ 57×10 /L50300/L50300 /L50300 =570（mA） SBC1 Series ø4.5/L11546.5 SBC2 Series ø6.0/L11546.0 SBC3 Series ø8.0/L11547.0 SBC4 Series ø8.0/L115410.0 SBC6 Series ø11.0/L115413.0 SBC7 Series ø14.0/L115412.0 SBC8 Series ø14.0/L115417.0 SBC9 Series ø11.0/L115410.0 Core size [mm]Model DIP Type Choke Coils VOL.08

• All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
• Please request for a specification sheet for detailed product data prior to the purchase.
• Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.

[mm] +1.0 –0.5 ø12 max. 3.515 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R0 1R0 1R0 10±0.5 8.5±1.0 ø1.0 (CP wire) ø15 max. 22.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 152 152 152 +1.0 –0.5 ø12 max. 3.512 max. 1.0 max. (8.5) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 2R2 2R2 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 18.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 681 681 681 681 +1.0 –0.5 ø15 max. 3.519 max. 1.0 max. (10.0) (Non-soldered part) [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 6R8 6R8 6R8 6R8 +1.0 –0.5 ø15 max. 3.514 max. 1.0 max. (10) (Non-soldered) part [Soft leads] *Lead pitch is a reference value at the root end. *Integrated soft/hard lead structure. Inductance 1R2 1R2 8.5±1.0 10.0±0.5 ø1.0 (CP wire) ø15 max. 17.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 102 102 102 7.5±0.5 6.5±1.0 ø0.8 (CP wire) ø12 max. 15.5 max. [Hard leads] *Lead pitch is a value at the root end. *With phenolic resin base. Inductance 471 471 471 471 SBC6-1R0-962 SBC6-1R5-942 SBC6-2R7-872 SBC6-3R3-852 SBC6-4R7-802 SBC6-6R8-662 SBC6-100-462 SBC6-150-382 SBC6-220-302 SBC6-330-272 SBC6-470-232 SBC6-680-222 SBC6-101-172 SBC6-151-122 SBC6-221-112 SBC6-331-871 SBC6-471-701 Model ø1.20 ø1.20 ø1.20 ø1.20 ø1.20 ø1.00 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 Lead diam. SBC8-6R8-862 SBC8-100-692 SBC8-150-532 SBC8-220-492 SBC8-330-452 SBC8-470-372 SBC8-680-322 SBC8-101-242 SBC8-151-202 SBC8-221-182 SBC8-331-142 SBC8-471-112 SBC8-681-102 SBC8-102-761 Model ø1.20 ø1.00 ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.55 ø0.45 ø0.45 ø0.40 Lead diam. SBC9-1R0-982 SBC9-1R5-942 SBC9-2R2-792 SBC9-3R3-622 SBC9-4R7-562 SBC9-6R8-492 SBC9-100-422 SBC9-150-362 SBC9-220-312 SBC9-330-252 SBC9-470-202 SBC9-680-152 SBC9-101-122 SBC9-151-112 SBC9-221-821 SBC9-331-671 Model ø1.20 ø1.20 ø1.00 ø0.90 ø0.80 ø0.70 ø0.70 ø0.70 ø0.70 ø0.60 ø0.55 ø0.45 ø0.40 ø0.40 ø0.35 ø0.32 Lead diam. SBC7-6R8-612 SBC7-100-532 SBC7-150-482 SBC7-220-432 SBC7-330-342 SBC7-470-282 SBC7-680-222 SBC7-101-192 SBC7-151-172 SBC7-221-132 SBC7-331-941 SBC7-471-851 SBC7-681-701 Model ø0.90 ø0.90 ø0.90 ø0.90 ø0.80 ø0.70 ø0.60 ø0.60 ø0.60 ø0.50 ø0.40 ø0.40 ø0.35 Lead diam. Numbering System SBC 1 - 101 - 571 ① Series Core size Model numbers and Core sizes The model numbers are classified according to core size as shown below. Inductance: Rated current: *The presence of an external tube may not be indicated on the surface of sample products. ③ 10×10 /L50300/L50300 /L50300 =100（μH） ④ 57×10 /L50300/L50300 /L50300 =570（mA） SBC1 Series ø4.5/L11546.5 SBC2 Series ø6.0/L11546.0 SBC3 Series ø8.0/L11547.0 SBC4 Series ø8.0/L115410.0 SBC6 Series ø11.0/L115413.0 SBC7 Series ø14.0/L115412.0 SBC8 Series ø14.0/L115417.0 SBC9 Series ø11.0/L115410.0 Core size [mm]Model

6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils Performance Characteristics Series Item Performance Characteristics SBC1 Operating temperature –20°C to +105°C (including self-temperature rise) Rated inductance range 1 – 1,500 µH at 10 kHz, 1 mA Inductance tolerance ±10% – ±20% Rated DC resistance range 0.03 – 8.00 Ω maximum Rated current range 0.18 – 3.10 A SBC2 Operating temperature –20°C to +105°C (including self-temperature rise) Rated inductance range 1 – 3,300 µH at 10 kHz, 1 mA Inductance tolerance ±10% – ±20% Rated DC resistance range 0.01 – 13.80 Ω maximum Rated current range 0.09 – 6.10 A SBC3 Operating temperature –20°C to +105°C (including self-temperature rise) Rated inductance range 1.2 – 6,800 µH at 10 kHz, 1 mA Inductance tolerance ±10% – ±20% Rated DC resistance range 0.01 – 14.50 Ω maximum Rated current range 0.11 – 7.50 A SBC4 Operating temperature –20°C to +105°C (including self-temperature rise) Rated inductance range 1 – 10,000 µH at 10 kHz, 1 mA Inductance tolerance ±10% – ±20% Rated DC resistance range 0.01 – 19.50 Ω maximum Rated current range 0.11 – 7.40 A SBC6 Operating temperature –20°C to +105°C (including self-temperature rise) Rated inductance range 1 – 10,000 µH at 10 kHz, 1 mA Inductance tolerance ±10% – ±20% Rated DC resistance range 0.01 – 13.60 Ω maximum Rated current range 0.16 – 9.60 A SBC7 Operating temperature –20°C to +105°C (including self-temperature rise) Rated inductance range 6.8 – 10,000 µH at 10 kHz, 1 mA Inductance tolerance ±10% – ±20% Rated DC resistance range 0.02 – 10.30 Ω maximum Rated current range 0.19 – 6.10 A SBC8 Operating temperature –20°C to +105°C (including self-temperature rise) Rated inductance range 4.7 – 10,000 µH at 10 kHz, 1 mA Inductance tolerance ±10% – ±20% Rated DC resistance range 0.01 – 6.90 Ω maximum Rated current range 0.25 – 9.20 A SBC9 Operating temperature –20°C to +105°C (including self-temperature rise) Rated inductance range 1 – 10,000 µH at 10 kHz, 1 mA Inductance tolerance ±10% – ±20% Rated DC resistance range 0.01 – 16.10 Ω maximum Rated current range 0.12 – 9.80 A

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils Table 1 – Ratings & Part Number Reference Part Number Inductance L (µH) at 10 kHz, 1 mA Inductance Tolerance DC Resistance (Ω) Maximum Rated Current (A) ΔT = 20˚C Current (Reference Value) (A) Terminal Weight (g)ΔT = 40˚C L Change Rate −10% Soft Lead Pin Lead Part Number Inductance L (µH) at 10 kHz, 1 mA Inductance Tolerance DC Resistance (Ω) Maximum Rated Current (A) ΔT = 20˚C Current (Reference Value) (A) Terminal Weight (g)ΔT = 40˚C L Change Rate −10% Soft Lead Pin Lead

8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils Table 1 – Ratings & Part Number Reference cont’d Part Number Inductance L (µH) at 10 kHz, 1 mA Inductance Tolerance DC Resistance (Ω) Maximum Rated Current (A) ΔT = 20˚C Current (Reference Value) (A) Terminal Weight (g)ΔT = 40˚C L Change Rate −10% Soft Lead Pin Lead Part Number Inductance L (µH) at 10 kHz, 1 mA Inductance Tolerance DC Resistance (Ω) Maximum Rated Current (A) ΔT = 20˚C Current (Reference Value) (A) Terminal Weight (g)ΔT = 40˚C L Change Rate −10% Soft Lead Pin Lead

9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils Table 1 – Ratings & Part Number Reference cont’d Part Number Inductance L (µH) at 10 kHz, 1 mA Inductance Tolerance DC Resistance (Ω) Maximum Rated Current (A) ΔT = 20˚C Current (Reference Value) (A) Terminal Weight (g)ΔT = 40˚C L Change Rate −10% Soft Lead Pin Lead Part Number Inductance L (µH) at 10 kHz, 1 mA Inductance Tolerance DC Resistance (Ω) Maximum Rated Current (A) ΔT = 20˚C Current (Reference Value) (A) Terminal Weight (g)ΔT = 40˚C L Change Rate −10% Soft Lead Pin Lead

10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils Table 1 – Ratings & Part Number Reference cont’d Packaging Series Lead Type Packaging Type Pieces per Box SBC1 All Bulk 10,000 SBC2 Soft lead Bulk 3,750 Pin lead Bulk 8,000 SBC3 All Bulk 4,000 SBC4 Soft lead Bulk 3,000 Pin lead Bulk 4,000 SBC6 Soft lead Bulk 1,600 Pin lead Bulk 2,000 SBC7 All Bulk 1,000 SBC8 Soft lead Bulk 900 Pin lead Bulk 1,000 SBC9 All Bulk 2,000 Part Number Inductance L (µH) at 10 kHz, 1 mA Inductance Tolerance DC Resistance (Ω) Maximum Rated Current (A) ΔT = 20˚C Current (Reference Value) (A) Terminal Weight (g)ΔT = 40˚C L Change Rate −10% Soft Lead Pin Lead Part Number Inductance L (µH) at 10 kHz, 1 mA Inductance Tolerance DC Resistance (Ω) Maximum Rated Current (A) ΔT = 20˚C Current (Reference Value) (A) Terminal Weight (g)ΔT = 40˚C L Change Rate −10% Soft Lead Pin Lead

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils Handling Precautions Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long-term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur-bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly, preferably within six months of receipt. Export Control For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan Inductors should not be used, or sold for use, in the development, production, stockpiling or utilization of any conventional weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons.

12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard L 9007_SBC • 9/18/2018 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Through-Hole Inductors – Conformally Coated SBC Coils KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation.