DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

■ Hermetic Package for Hi-Reliability

Applications

■ Single Fixed 5V Supply ■ Patented Thermal Design and Bias Circuit ■ OIP3 = 40.5dBm at 70MHz ■ P1dB = 19.5dBm at 70MHz ■ Military Communications ■ Aerospace and Defense ■ PA Driver Amp SBB-2082S

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS131119 trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 2 of 5 Absolute Maximum Ratings Parameter Rating Unit Total Current (ID) 110 mA Device Voltage (VD) 5.5 V RF Input Power +24 dBm Operating Lead Temperature (TL) -40 to +85 °C Storage Temperature Range -55 to +150 °C Operating Junction Temp (TJ) +150 °C Moisture Sensitivity Level Hermetic ESD Rating - Human Body Model (HBM) Class 2 Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table below. Bias conditions should also satisfy the following expression: IDVD<(TJ-TL)/RTH, j-l and TL=TLEAD Caution! ESD sensitive device. RFMD Green: RoHS compliant per EU Directive 2011/65/EU, halogen free per IEC 61249-2-21, <1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Nominal Operating Parameters Parameter Specification Unit Condition Min Typ Max General Performance Test Conditions: Z0 = 50Ω, VD = 5V, ID = 86mA, T = 25°C, OIP3 POUT/tone = 0dBm, 50Ω test fixture with bias tees Frequency of Operation 50 850 MHz Supply Voltage 5.0 V Supply Current 75 86 98 mA Small Signal Gain 18.5 20.2 dB Freq = 100MHz 19.8 dB Freq = 500MHz Output Power at 1dB Compression 18.0 19.5 dBm Freq = 70MHz Output Third Order Intercept Point 38.5 40.5 dBm F1 = 70MHz, F2 = 71MHz Input Return Loss 9.5 25 dB Freq = 100MHz 25.0 dB Freq = 500MHz Output Return Loss 9.5 20 dB Freq = 100MHz 15.0 dB Freq = 500MHz Reverse Isolation 19 22 dB Freq = 100MHz 22.0 dB Freq = 500MHz Noise Figure 3.1 dB Freq = 500MHz Thermal Resistance 45 °C/W Junction to case

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS131119 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 5 SBB-2082S Typical Performance: (50Ω Test Fixture with Bias Tees) VS = 5.0V

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS131119 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 5 SBB-2082S Package Drawing (Dimensions in inches [millimeters]) Notes: 1. Package material: Ceramic 2. Lead finish: Gold Pin Names and Descriptions Pin Name Description 1 RFIN This pin is DC coupled and matched to 50Ω. An external DC block is required. 2 RFOUT This pin is DC coupled and matched to 50Ω. DC bias is applied through this pin. Package Paddle GND Package backside must be connected to RF/DC ground.

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS131119 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 5 of 5 SBB-2082S Typical Application Schematic