SATFD1G84AU0E0A

SATFD1G84AU0E0A MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

■ Feature Revision A Note : This Murata SAW Component is Consumer grade product and applicable for Cellular phone or similar end devices. Please also read Important Notice at the end of this document. Datasheet of SAW Device Support Band1/3/7 CA and MIMO Support Band66 SAW Triple Filter Murata PN : SATFD1G84AU0E0A for Band66_Band3_Band7 / Unbalanced / 10pin /1511

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) General Information - Operating temperature : - Storage temperature : - Input Power : - D.C. Voltage between the terminals : - Minimum Resistance between the terminals : - RoHS compliance : - ESD (ElectroStatic Discharge) sensitive device Yes -20 to +85deg.C -40 to +85deg.C 3V (25+/-2 deg.C) 10M ohm +15.0dBm 5000h +50deg.C All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 1/11

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) Dimensions Land Pattern Measurement Circuit (Top Thru View) : 2.2 nH (Ideal inductor) : 50 ohm : 50 ohm : 50 ohm : 50 ohm : 9.0 nH (Ideal inductor) : 4.7 nH (Ideal inductor) : 9.5 nH (Ideal inductor) Package Dimensions & Recommended Land Pattern unit: mm : Laser Printing : ANT. Port : RX Port (B7) : RX Port (B66) : RX Port (B3) : Date code : A : 9 2 : Month code : GND Notice) Please refer to Measurement Circuit for Port information in detail. Terminal Number Marking (1) (4) (6) (9) Others All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 2/11

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) Electrical Characteristic min. typ.* max. Center Frequency 1842.5 MHz Ripple Deviation 1805. to 1880. MHz 0.9 2.0 dB VSWR 1805. to 1880. MHz 1.7 2.2 Absolute Attenuation 10. to 1710. MHz 30 35 dB 703. to 748. MHz 40 52 dB Band28 TX 814. to 849. MHz 40 49 dB Band26 TX 832. to 862. MHz 40 49 dB Band20 TX 880. to 915. MHz 40 48 dB Band8 TX 1427.9 to 1447.9 MHz 31 37 dB Band11 TX 1447.9 to 1462.9 MHz 31 37 dB Band21 TX 1615. to 1690. MHz 31 36 dB 1712.5 to 1782.5 MHz 35 41 dBINT Band3 TX, Any 4.5MHz 1785. to 1790. MHz 8.0 32.0 dB 1922.5 to 1977.5 MHz 34 42 dBINT Band1 TX, Any 4.5MHz 1920. to 6000. MHz 28 35 dB 2400. to 2500. MHz 35 40 dB 2496. to 2690. MHz 33 39 dB Band41 2502.5 to 2567.5 MHz 35 41 dBINT Band7 TX, Any 4.5MHz 3300. to 3800. MHz 30 41 dB n77 3300. to 4200. MHz 30 41 dB n78 3515. to 3610. MHz 30 45 dB 3610. to 3760. MHz 30 44 dB 2f0 3760. to 13025. MHz 19 24 dB 4400. to 5000. MHz 30 37 dB n79 4900. to 5950. MHz 30 36 dB WLAN 5G 5225. to 5415. MHz 30 36 dB 5415. to 5640. MHz 30 36 dB 3f0 7220. to 7520. MHz 26 32 dB 9025. to 9400. MHz 23 29 dB 10830. to 11280. MHz 23 28 dB 12635. to 12750. MHz 20 25 dB * Typical value at 25±2deg.C Band3 Characteristics Unit Note(-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 3/11

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) Electrical Characteristic min. typ.* max. Center Frequency 2155 MHz Ripple Deviation 2110. to 2170. MHz 0.3 1.5 dB 2110. to 2200. MHz 0.3 1.5 dB VSWR 2110. to 2170. MHz 1.6 2.0 2110. to 2200. MHz 1.6 2.0 Absolute Attenuation 10. to 1920. MHz 25 33 dB 190. to 190. MHz 50 98 dB 400. to 400. MHz 50 80 dB 699. to 716. MHz 40 64 dB Band12 TX 777. to 787. MHz 40 61 dB Band13 TX 815. to 830. MHz 40 59 dB Band18 TX 814. to 849. MHz 40 58 dB Band26 TX 824. to 849. MHz 40 58 dB Band5 TX 880. to 915. MHz 40 57 dB Band8 TX 898. to 925. MHz 40 57 dB 1427.9 to 1447.9 MHz 35 44 dB Band11 TX 1447.9 to 1462.9 MHz 35 43 dB Band21 TX 1710. to 1755. MHz 31 37 dB Band4 TX 1712.5 to 1782.5 MHz 33 38 dBINT Band3 TX, Any 4.5MHz 1850. to 1910. MHz 35 44 dB Band2 TX 1850. to 1915. MHz 35 42 dB Band25 TX 1922.5 to 1977.5 MHz 35 40 dBINT Band1 TX, Any 4.5MHz 2015. to 2075. MHz 25 30 dB 2400. to 2500. MHz 30 38 dB 2496. to 2690. MHz 29 34 dB 2502.5 to 2567.5 MHz 35 44 dBINT Band7 TX, Any 4.5MHz 3300. to 3800. MHz 30 47 dB n77 3300. to 4200. MHz 30 45 dB n78 4030. to 4150. MHz 35 45 dB 4220. to 4400. MHz 35 44 dB 2f0 4340. to 13025. MHz 15 26 dB 4400. to 5000. MHz 30 42 dB n79 4900. to 5950. MHz 30 40 dB WLAN 5G 5950. to 6130. MHz 30 40 dB 6330. to 6600. MHz 30 39 dB 3f0 8440. to 8680. MHz 29 34 dB 10550. to 10850. MHz 20 30 dB 12660. to 13020. MHz 15 26 dB * Typical value at 25±2deg.C Band66 Characteristics Unit Note(-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 4/11

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) Electrical Characteristic min. typ.* max. Center Frequency 2655 MHz Ripple Deviation 2620. to 2690. MHz 0.4 1.5 dB VSWR 2620. to 2690. MHz 1.6 2.0 Absolute Attenuation 10. to 2500. MHz 30 36 dB 45. to 45. MHz 50 118 dB 699. to 716. MHz 40 62 dB Band12 TX 703. to 748. MHz 40 60 dB Band28 TX 814. to 849. MHz 40 58 dB Band26 TX 832. to 862. MHz 40 57 dB Band20 TX 880. to 915. MHz 40 56 dB Band8 TX 1710. to 1785. MHz 39 45 dB Band3 TX 1710.15 to 1784.85 MHz 39 45 dB Band3 TX 1710.25 to 1784.75 MHz 39 45 dB Band3 TX 1712.5 to 1782.5 MHz 39 45 dBINT Band3 TX, Any 4.5MHz 1922.5 to 1977.5 MHz 40 46 dBINT Band1 TX, Any 4.5MHz 2400. to 2500. MHz 30 36 dB 2502.5 to 2567.5 MHz 32 38 dBINT Band7 TX, Any 4.5MHz 2775. to 6000. MHz 28 34 dB 3300. to 3800. MHz 30 42 dB n77 3300. to 4200. MHz 30 39 dB n78 4400. to 5000. MHz 30 37 dB n79 4900. to 5950. MHz 30 35 dB 5300. to 5950. MHz 30 35 dB 6000. to 12570. MHz 15 23 dB 7620. to 7830. MHz 25 31 dB 7860. to 8070. MHz 25 31 dB 10480. to 10760. MHz 20 26 dB * Typical value at 25±2deg.C Band7 Characteristics Unit Note(-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 5/11

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) Electrical Characteristic All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 6/11

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) Electrical Characteristic All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 7/11

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) Electrical Characteristic All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 8/11

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) Dimensions of Tape & Reel unit: mm Carrier Tape A: 8.0 J: 1.3 B: 1.75 K: 1.7 C: 3.50 L: 0.75 D: 4.0 E: 2.00 F: 4.0 G: φ1.5 H: 1.00 Tape Reel A: φ13.0 A: φ13.0 B: 13.5max B: 15.5max C: 9.0 C: 9.5 D: φ60 D: φ100 E: φ178 E: φ330 SATFD1G84AU0E0AR00… 10000pcs (φ330) SATFD1G84AU0E0AR1S… Sample Order (φ178/330) φ178Reel φ330Reel 160 min. 80~280 400~560 Trailer tape Components Leader Cavity Unit: mm Cover tape All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 9/11

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) Important Notice (1/2) PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. (a) Aircraft equipment. (b) Aerospace equipment (c) Undersea equipment. (d) Power plant control equipment (e) Medical equipment. (f) Transportation equipment (vehicles, automotive, trains, ships, etc.). (g) Traffic signal equipment. (h) Disaster prevention / crime prevention equipment. (i) Burning / explosion control equipment (j) - AEC-Q200 - PPAP - IATF16949,VDA6.3 - Zero Defect program - Long product life cycle - Automotive 8D failure analysis and report Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product specified in the front page of this product specifications (the "Product" or "Products") when our Product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our Product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our Product deviating from the condition and the environment specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The Product shall not be used for any application which requires especially high reliability or accuracy in order to prevent defect which incurs high possibility of damage to the third party's life, body or property such as the applications listed below as item (a) to (j) (the “Prohibited Application”). You acknowledge and agree that, if you use our Products in the Prohibited Applications, we will not be responsible for any damage caused by such use. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN THE PROHIBITED APPLICATIONS. Application of similar complexity and/ or reliability requirements to the applications listed in the above. For the avoidance of doubt, the Product is not automotive grade, and will not support such requests for automotive as below, also not support other specific requests for automotive. Please note that the only warranty that we provide regarding the Product is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such Products, which are caused under the conditions other than those specified in this specification. All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 10/11

SATFD1G84AU0E0A ( Band66_Band3_Band7 / Unbalanced / 10pin / 1511 ) Important Notice (2/2) Please do not use the Product in molding condition. The Product shall not be used in any other application/model than that of claimed to Murata. In particular we disclaim liability for damages caused by ・ deviation or lapse in function of engineering sample, ・ improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you cannot agree the above contents, you should inquire our sales. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the Product to be sold by you, We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing our Product. Our Product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. The Product is ESD (ElectroStatic Discharge) sensitive device. When you install or measure this, you should be careful not to add antistatic electricity or high voltage. Please be advised that you had better check anti serge voltage. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our Products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our Products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged defect of Products only at the level required for consumer grade Products, and thus such analysis may not always be available or be in accordance with your request (for example, in cases where the defect was caused by components in Products supplied to Murata from a third party). All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 11/11