SATEY1G47AU0F0A

SATEY1G47AU0F0A MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

for Band1,3,32 / 1in3out Unbalanced / 8pin /1814 Murata PN: SATEY1G47AU0F0A  Feature  For CA Note : This Murata SAW Component is Consumer grade product and applicable for Cellular phone or similar end devices. Please also read Important Notice at the end of this document. Revision F

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 1/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) General Information - Operating temperature - Storage temperature - Input Power - D.C. Volatage between the terminals - Minimum Resistance between the terminals : 10M ohm - RoHS compliance : Yes - ESD (ElectroStatic Discharge) sensitive device : 3V (25+/-2 deg.C) : +15 dBm 5000 h : -40 to +85 deg.C : -20 to +85 deg.C

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 2/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) Package Dimensions & Recommended Land Pattern unit: mm Dimensions Marking : Laser Printing * : Month code $ : Date code 1 : C 2 : y Terminal Number (7) : ANT. Port (1) : B3 Rx (3) : B1 Rx (5) : B32 Rx Others : GND. Notice) Please refer to Measurement Circuit for Port information in detail. Land Pattern Measurement Circuit (Top Thru View) R1 : 50 ohm L1 :2.2nH(Ideal inductor) R2 : 50 ohm R3 : 50 ohm R4 : 50 ohm L2 :16nH(Ideal inductor)

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 3/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) Electrical Characteristic < Low Freq. Filter > min. typ.* max. Center Frequency 1474 MHz Insertion Loss 1452. to 1496. MHz 2.2 3.2 dB B32 Ripple Deviation 1452. to 1496. MHz 0.6 1.7 dB Any 5MHz VSWR 1452. to 1496. MHz 1.6 2.3 B32 IN 1452. to 1496. MHz 1.8 2.4 B32 OUT Absolute Attenuation 100. to 1367. MHz 30 48 dB 484. to 498.7 MHz 62 69 dB 726. to 748. MHz 57 64 dB 832. to 862. MHz 57 62 dB 1367. to 1392. MHz 30 39 dB 1556. to 1581. MHz 40 48 dB 1581. to 12750. MHz 15 26 dB 1710. to 1785. MHz 40 46 dB B3Tx 1805. to 1880. MHz 43 49 dB B3Rx 1920. to 1980. MHz 40 47 dB B1Tx 2110. to 2170. MHz 35 40 dB B1Rx 2400. to 2500. MHz 39 45 dB 2904. to 2992. MHz 38 43 dB 4356. to 4488. MHz 34 40 dB 4900. to 5950. MHz 30 38 dB 5950. to 5984. MHz 30 38 dB * Typical value at 25±2deg.C ( -20 to +85 deg.C ) Band32 Characteristics Unit Note

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 4/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) Electrical Characteristic < Middle Freq. Filter > min. typ.* max. Center Frequency 1842.5 MHz Insertion Loss 1805. to 1880. MHz 2.3 3.3 dB B3 RX Ripple Deviation 1805. to 1880. MHz 0.5 1.5 dB Any 5MHz VSWR 1805. to 1880. MHz 1.6 2.1 B3 RX IN 1805. to 1880. MHz 2.0 2.6 B3 RX OUT Absolute Attenuation 100. to 1710. MHz 25 33 dB 95. to 95. MHz 50 99 dB Rx - Tx 824. to 849. MHz 40 46 dB B5 Tx CA 832. to 862. MHz 40 45 dB B20 Tx CA 880. to 915. MHz 40 44 dB B8 Tx CA 1615. to 1690. MHz 27 33 dB 2Tx - Rx 1710. to 1785. MHz 34 39 dB 1785. to 1790. MHz 8.0 30.0 dB (Rx + Tx)/2 1920. to 1980. MHz 36 40 dB B1 Tx 1920. to 6000. MHz 26 35 dB 2400. to 2500. MHz 34 39 dB 2.4 GHz ISM 2500. to 2570. MHz 28 35 dB B7 Tx CA 3515. to 3610. MHz 40 48 dB Rx + Tx 3610. to 3760. MHz 40 47 dB 2x LO 3760. to 13025. MHz 18 29 dB 4900. to 5950. MHz 30 36 dB 5 GHz ISM 5225. to 5415. MHz 30 37 dB Rx + 2Tx 5415. to 5640. MHz 30 36 dB 3x LO 7220. to 7520. MHz 25 34 dB 4x LO 9025. to 9400. MHz 23 32 dB 5x LO 10830. to 11280. MHz 20 29 dB 6x LO 12635. to 12750. MHz 20 32 dB 7x LO * Typical value at 25±2deg.C ( -20 to +85 deg.C ) Band3 Characteristics Unit Note

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 5/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) Electrical Characteristic < High Freq. Filter > min. typ.* max. Isolation 2140 MHz Insertion Loss 2110. to 2170. MHz 2.3 3.1 dB B1 RX Ripple Deviation 2110. to 2170. MHz 0.2 0.9 dB Any 5MHz, B1 RX VSWR 2110. to 2170. MHz 1.7 2.3 B1RX IN 2110. to 2170. MHz 1.8 2.5 B1RX OUT Absolute Attenuation 100. to 1920. MHz 30 37 dB 190. to 190. MHz 50 80 dB Rx – Tx (B1) 400. to 400. MHz 50 69 dB Rx – Tx (B4/B66) 699. to 716. MHz 50 58 dB B12 Tx CA (B4) 716. to 723.3 MHz 50 57 dB B28 Tx CA 777. to 787. MHz 50 56 dB B13 Tx CA (B4) 814. to 849. MHz 48 54 dB B26 Tx CA 832. to 862. MHz 48 54 dB B20 Tx CA 880. to 915. MHz 48 53 dB B8 Tx CA 1055. to 1100. MHz 43 49 dB Rx/2 1310. to 1360. MHz 39 44 dB 2Tx - Rx 1427.9 to 1462.9 MHz 32 39 dB B11 and B21 Tx CA 1710. to 1755. MHz 37 44 dB B4 Tx CA 1730. to 1920. MHz 37 45 dB 2Tx – Rx 1755. to 1785. MHz 45 53 dB B3/B66 Tx CA 1850. to 1910. MHz 42 47 dB B2/B25 Tx CA 1920. to 1980. MHz 42 50 dB B1 Tx CA 2015. to 2075. MHz 20 38 dB (Rx + Tx)/2 2230. to 2255. MHz 30 37 dB 2255. to 12750. MHz 10 23 dB 2305. to 2315. MHz 40 45 dB B30 Tx CA 2400. to 2500. MHz 40 47 dB 2.4 GHz ISM 2500. to 2570. MHz 40 45 dB B7 Tx CA 4030. to 4150. MHz 40 48 dB Rx + Tx (B1) 4220. to 4340. MHz 40 47 dB 2x LO 4900. to 5950. MHz 34 40 dB 5 GHz ISM 5950. to 6130. MHz 32 40 dB Rx + 2Tx 6330. to 6510. MHz 30 39 dB 3x LO 8440. to 8680. MHz 20 32 dB 4x LO 10550. to 10850. MHz 20 28 dB 5x LO 12660. to 13020. MHz 10 21 dB 6x LO * Typical value at 25±2deg.C ( -20 to +85 deg.C ) Band1 Characteristics Unit Note

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 6/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) Electrical Characteristic < Low Freq. Filter > 1350 1400 1450 1500 1550 1600 I.L.[dB] Frequency[MHz] 0 1000 2000 3000 4000 5000 6000 7000 8000 I.L.[dB] Frequency[MHz]

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 7/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) Electrical Characteristic < Middle Freq. Filter > 1640 1680 1720 1760 1800 1840 1880 1920 1960 2000 2040 I.L.[dB] Frequency[MHz] 0 1000 2000 3000 4000 5000 6000 7000 8000 I.L.[dB] Frequency[MHz]

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 8/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) Electrical Characteristic < High Freq. Filter > 1940 1980 2020 2060 2100 2140 2180 2220 2260 2300 2340 I.L.[dB] Frequency[MHz] 0 1000 2000 3000 4000 5000 6000 I.L.[dB] Frequency[MHz]

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 9/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) Dimensions of Tape & Reel unit: mm Carrier Tape A: 8.0 J: 1.7 B: 1.75 K: 2.1 C: 3.50 L: 0.70 D: 4.0 E: 2.00 F: 4.0 G: φ1.5 H: 1.00 Tape Reel SATEY1G47AU0F0AR00… 10000pcs (φ330) SAT EY1G47AU0F0AR1S… Samp le Order (φ178/330) φ178Reel φ330Reel A: φ13.0 A: φ13.0 B: 13.5max B: 15.5max C: 9.0 C: 9.5 D: φ60 D: φ100 E: φ178 E: φ330 160 min. 80~280 400~560 Trailer tape Components Leader Cavity Unit: mm Cover tape

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 10/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) Important Notice (1/2) PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product specified in the front page of this product specifications (the "Product" or "Products") when our Product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our Product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our Product deviating from the condition and the environment specified in this specification. Please note that the only warranty that we provide regarding the Product is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such Products, which are caused under the conditions other than those specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The Product shall not be used for any application which requires especially high reliability or accuracy in order to prevent defect which incurs high possibility of damage to the third party's life, body or property such as the applications listed below as item (a) to (j) (the “Prohibited Application”). You acknowledge and agree that, if you use our Products in the Prohibited Applications, we will not be responsible for any damage caused by such use. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN THE PROHIBITED APPLICATIONS. (a) Aircraft equipment. (b) Aerospace equipment (c) Undersea equipment. (d) Power plant control equipment (e) Medical equipment. (f) Transportation equipment (vehicles, automotive, trains, ships, etc.). (g)Traffic signal equipment. (h)Disaster prevention / crime prevention equipment. (i) Burning / explosion control equipment (j) Application of similar complexity and/ or reliability requirements to the applications listed in the above. For the avoidance of doubt, the Product is not automotive grade, and will not support such requests for automotive as below, also not support other specific requests for automotive. - AEC-Q200 - PPAP - IATF16949,VDA6.3 - Zero Defect program - Long product life cycle - Automotive 8D failure analysis and report

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 11/11 SATEY1G47AU0F0A ( Band1,3,32 / 1in3out Unbalanced / 8p in / 1814 ) Important Notice (2/2) We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing our product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. Please do not use the Product in molding condition. This product is ESD (ElectroStatic Discharge) sensitive device. When you install or measure this, you should be careful not to add antistatic electricity or high voltage. Please be advised that you had better check anti serge voltage. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our Products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our Products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged defect of Products only at the level required for consumer grade Products, and thus such analysis may not always be available or be in accordance with your request (for example, in cases where the defect was caused by components in Products supplied to Murata from a third party). The Product shall not be used in any other application/model than that of claimed to Murata. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. In particular we disclaim liability for damages caused by ・ the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the Product to be sold by you, ・ deviation or lapse in function of engineering sample, ・ improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you can’t agree the above contents, you should inquire our sales.