SAFKJ2G35MA0E0A MURATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 11
Technical content
■ Feature Revision High Power Durability Note : This Murata SAW Component is Industry grade product and applicable for higher reliability & wide operating temperature requirement in Consumer & Industry application. Please also read Important Notice at the end of this document. B Datasheet of SAW Device SAW Single Filter for Band40 / Unbalanced / 5pin /1109 Murata PN : SAFKJ2G35MA0E0A Post PA Filter
SAFKJ2G35MA0E0A ( Band40 / Unbalanced / 5pin / 1109 ) General Information - Operating temperature : - Storage temperature : - Input Power - D.C. Voltage between the terminals : - Minimum Resistance between the terminals : - RoHS compliance : - ESD (ElectroStatic Discharge) sensitive device The input power shall be applied to Tx-port within own Tx passband frequency range. Yes -40 to +85deg.C -40 to +105deg.C 3V (25+/-2 deg.C) 1M ohm +30.0dBm 5000h +50deg.C (1)(3) +28.5dBm 5000h +50deg.C (2)(4) (1) applicable for W-CDMA, LTE, NR(DFT-s-OFDM) (2) applicable for NR(CP-OFDM) (3) 40% Duty Cycle (4) 50% Duty Cycle All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 1/10
SAFKJ2G35MA0E0A ( Band40 / Unbalanced / 5pin / 1109 ) Dimensions Land Pattern Measurement Circuit (Top Thru View) (1) (4) Others Notice) Please refer to Measurement Circuit for Port information in detail. Terminal Number Marking Package Dimensions & Recommended Land Pattern unit: mm : Laser Printing : Unbalance Port (PA-side) : Unbalance Port (Ant.-side) : GND : Date code : A : 3 2 : Month code : 6.0 nH (Ideal inductor) : 6.0 nH (Ideal inductor) : 50 ohm : 50 ohm All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 2/10
SAFKJ2G35MA0E0A ( Band40 / Unbalanced / 5pin / 1109 ) Electrical Characteristic min. typ.* max. Center Frequency 2350 MHz Ripple Deviation 2300. to 2400. MHz 0.3 1.0 dB Any 5MHz VSWR 2300. to 2400. MHz 1.3 2.0 Absolute Attenuation 10. to 1574. MHz 20 25 dB 1574. to 1577. MHz 20 25 dB 1577. to 1680. MHz 20 25 dB 1845. to 1880. MHz 20 25 dB 2110. to 2170. MHz 24 29 dB 2421. to 2443. MHz 11 21 dB INT +23 to +85deg.C, WLAN ch05 18MHz-BW 2426. to 2448. MHz 23 43 dB INT +23 to +85deg.C, WLAN ch06 18MHz-BW 2431. to 2483. MHz 35 43 dB INT +23 to +85deg.C, WLAN ch7-13 18MHz-BW 2620. to 2690. MHz 23 28 dB B7 Rx 4600. to 4800. MHz 30 38 dB 2f 6900. to 7200. MHz 23 48 dB 3f * Typical value at 25±2deg.C Single Filter Characteristics Unit Note (-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 3/10
SAFKJ2G35MA0E0A ( Band40 / Unbalanced / 5pin / 1109 ) Electrical Characteristic min. typ.* max. Center Frequency 2350 MHz Ripple Deviation 2300. to 2400. MHz 0.3 1.2 dB Any 5MHz VSWR 2300. to 2400. MHz 1.3 2.0 Absolute Attenuation 10. to 1574. MHz 20 25 dB 1574. to 1577. MHz 20 25 dB 1577. to 1680. MHz 20 25 dB 1845. to 1880. MHz 20 25 dB 2110. to 2170. MHz 24 29 dB 2421. to 2443. MHz 11 21 dB INT +23 to +85deg.C, WLAN ch05 18MHz-BW 2426. to 2448. MHz 23 43 dB INT +23 to +85deg.C, WLAN ch06 18MHz-BW 2431. to 2483. MHz 35 43 dB INT +23 to +85deg.C, WLAN ch7-13 18MHz-BW 2620. to 2690. MHz 23 28 dB B7 Rx 4600. to 4800. MHz 30 38 dB 2f 6900. to 7200. MHz 23 48 dB 3f * Typical value at 25±2deg.C Single Filter Characteristics Unit Note (-40~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 4/10
SAFKJ2G35MA0E0A ( Band40 / Unbalanced / 5pin / 1109 ) Electrical Characteristic All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 5/10
SAFKJ2G35MA0E0A ( Band40 / Unbalanced / 5pin / 1109 ) PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS Test Item Test Condition Criteria
7.1 PCB Bend
Filter is soldered onto the center of 0.8mm thickness PCB whic h is laid on the two small supporters spaced 90mm as shown in below figure. PCB is deflected to 2mm below from horizontal level by the pressing stick. The force is supplied for 1 second , 5 times repeatedly. No visible damage should be induced and the electrical performance should meet Table 1.
7.2 Vibration The electrical performance is measured after b eing applied
vibration of amplitude of 1.5mm with 10 to 55Hz of vibration frequency to each of 3 perpendicular directions for 2 hours.
7.3 Drop Test The electrical performance is measured after a d ropping with
housing (around 150g) from a height of 150cm onto the concret e plate 3 times in each of 6 perpendicular directions.
7.4 Solderability In accordance to the following cond itions solder wettability is
satisfied. Solder Paste: Sn-3.0Ag-0.5Cu Pre-heat: 150~180 deg.C, 60~120sec Peak temperature: 235 deg.C max. Over 225 deg.C: 15s~25s 95% minimum of the immersed surface should be covered with solder.
7.5 Resistance to
Filter is preheated at 170±10°C for 90 seconds, immersed whol e electrode in soldering bath at 255 ±5 ° C for 3 ±1 seconds, then measured after being placed in standard atmospheric condit ions for 2 hours. The electrical performance should meet Table 1.
7.6 Temperature
The electrical performance is measured over -40...+85 ° C temperature range. The electrical performance should meet chapter 6.
7.7 Humidity The electrical performance is measured after be ing placed in a
chamber with 85% R.H. at 85°C for 1000 hours and then being placed in standard atmospheric conditions for 2 hours.
7.8 Life Test
(High Temperature) The electrical performance is measured after being placed in a chamber with 105 ° C for 1000 hours and then being placed in standard atmospheric conditions for 2 hours.
7.9 Life Test
(Low Temperature) The electrical performance is measured after being placed in a chamber with -40 ° C for 1000 hours and then being placed in standard atmospheric conditions for 2 hours.
7.10 Temperature
After temperature cycling of -40°C for 30 minutes to +85°C fo r 30 minutes performed 500 times, filter shall be returned to roo m temperature. And the electrical performance is measured af ter being placed in standard atmospheric conditions for 2 hours.
7.11 Resistance to
The electrical performance is measured after being soldered by reflow 3 times with the following reflow profile (see Graph. 1) and then being placed in standard atmospheric conditions for 24 hours. The electrical performance should meet Table 1. The electrical performance should meet Table 1. ±1 off-set 45 φ 5 Supporter R10 Pressing Stick 20 10 Unit:mm Load PCB Part All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 6/10
SAFKJ2G35MA0E0A ( Band40 / Unbalanced / 5pin / 1109 ) Table 1 Electrical Characteristics < Refer to Measurement Circuit > min. max. Insertion Loss 2302.5 to 2397.5 MHz 2.4 dB INT Any 4.5MHz Ripple Deviation 2300. to 2400. MHz 1.2 dB Any 5MHz VSWR 2300. to 2400. MHz 2.0 Absolute Attenuation 10. to 1574. MHz 20 dB 1574. to 1577. MHz 20 dB 1577. to 1680. MHz 20 dB 1845. to 1880. MHz 20 dB 2110. to 2170. MHz 24 dB 2620. to 2690. MHz 23 dB B7 Rx 4600. to 4800. MHz 30 dB 2f 6900. to 7200. MHz 23 dB 3f * All the tests shall be carried out on the following conditions. [Temperature: 25±2°C, Humidity: 65±5% R.H.] Single Filter Characteristics Unit Note All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 7/10
SAFKJ2G35MA0E0A ( Band40 / Unbalanced / 5pin / 1109 ) Dimensions of Tape & Reel unit: mm Carrier Tape A: 8.0 J: 1.10 B: 1.75 K: 1.30 C: 3.50 L: 0.55 D: 4.0 E: 2.00 F: 2.0 G: φ1.5 H: 0.75 Tape Reel A: φ13.0 A: φ13.0 B: 13.5max B: 15.5max C: 9.0 C: 9.5 D: φ60 D: φ100 E: φ178 E: φ330 SAFKJ2G35MA0E0AR1X… 10000pcs ( φ178) SAFKJ2G35MA0E0AR1S… Sample Order ( φ178/330) φ178Reel φ330Reel 160 min. 80~280 400~560 Trailer tape Components Leader Cavity Unit: mm Cover tape All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 8/10
SAFKJ2G35MA0E0A ( Band40 / Unbalanced / 5pin / 1109 ) Important Notice (1/2) PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. (a) Aircraft equipment. (b) Aerospace equipment (c) Undersea equipment. (d) Power plant control equipment (e) Medical equipment. (f) Transportation equipment (vehicles, automotive, trains, ships, etc.). (g) Traffic signal equipment. (h) Disaster prevention / crime prevention equipment. (i) Burning / explosion control equipment (j) - AEC-Q200 - PPAP - IATF16949,VDA6.3 - Zero Defect program - Long product life cycle - Automotive 8D failure analysis and report Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product specified in the front page of this product specifications (the "Product" or "Products") when our Product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our Product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our Product deviating from the condition and the environment specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The Product shall not be used for any application which requires especially high reliability or accuracy in order to prevent defect which incurs high possibility of damage to the third party's life, body or property such as the applications listed below as item (a) to (j) (the “Prohibited Application”). You acknowledge and agree that, if you use our Products in the Prohibited Applications, we will not be responsible for any damage caused by such use. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN THE PROHIBITED APPLICATIONS. For the avoidance of doubt, the Product is not automotive grade, and will not support such requests for automotive as below, also not support other specific requests for automotive. Please note that the only warranty that we provide regarding the Product is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such Products, which are caused under the conditions other than those specified in this specification. Please refer to product specifications for further details of terms of liabilities and warranties. Application of similar complexity and/ or reliability requirements to the applications listed in the above. All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 9/10
SAFKJ2G35MA0E0A ( Band40 / Unbalanced / 5pin / 1109 ) Important Notice (2/2) The Product shall not be used in any other application/model than that of claimed to Murata. In particular we disclaim liability for damages caused by ・ deviation or lapse in function of engineering sample, ・ improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you cannot agree the above contents, you should inquire our sales. Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged defect of Products only at the level required for consumer grade Products, and thus such analysis may not always be available or be in accordance with your request (for example, in cases where the defect was caused by components in Products supplied to Murata from a third party). We provide no warranty as to the Product, including any warranty as to quality and safety, in case the Product is molded into module(s) (the “Molded Condition”). You shall indemnify and hold us and our affiliates harmless from any claims, losses and damages caused under the Molded Condition. If you use the Product under the Molded Condition, you shall take all measures to ensure that adequacy, validity, quality and safety required for use of the Product shall be attained, secured and maintained at your own cost and responsibility. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the Product to be sold by you, We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing our Product. Our Product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. This product is ESD (ElectroStatic Discharge) sensitive device. When you install or measure this, you should be careful not to add antistatic electricity or high voltage. Please be advised that you had better check anti serge voltage. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our Products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our Products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. We will provide you with written notice of such discontinuation as soon as reasonably practicable but no less than twelve (12) months prior to such discontinuation (the “EOL Notice Requirement”). While we will make commercially reasonable effort to adhere to the EOL Notice Requirement, the notice period may be less than twelve (12) months in the event of unavoidable circumstances. All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 10/10