DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Data Sheet of SAW Components Note : Murata SAW Component is applicable for Cellular /Cordless phone (Terminal) relevant market only. Please also read caution at the end of this document.

Aug. 1, 2017 SAW FILTER FOR UMTS Band2 Rx Murata part number : SAFFB1G96FN0F0A Package Dimensions Specification (1) (3)(4) Others Unit : Unbalance Port : Balance Port : Ground : mm Nominal Center Frequency(fc) 4.0 dB INT max. 3.5 dB INT max. 3.0 dB INT 1) 0.1 to 824 MHz 50 dB min. 50 dB min. 63 dB 2) 824 to 849 MHz 50 dB min. 50 dB min. 63 dB 3) 849 to 1850 MHz 45 dB min. 45 dB min. 56 dB 4) 1850 to 1910 MHz 46 dB min. 46 dB min. 50 dB 5) 1852.4 to 1907.6 MHz * 46 dB INT min. 46 dB INT min. 53 dB INT 6) 2400 to 2484 MHz 40 dB min. 40 dB min. 54 dB 7) 3860 to 3980 MHz 40 dB min. 40 dB min. 53 dB 8) 3980 to 6000 MHz 40 dB min. 40 dB min. 51 dB Amplitude Balance 100Ω//22nH Absolute Attenuation 2.5 dB max. 2.0 max. 31.6mW (+15dBm), 2000 hours (1850-1910 MHz, at 50 ℃) 20mW (+13dBm), 2000hours (elsewhere) Input Signal Level (1932.4 to 1987.6MHz) max. 1.6 1.9 max. dB Ripple Deviation Item Specification -30 to 85°C 25±2°C typ. VSWR (1930.48 to 1989.52 MHz) 1960MHz Insertion Loss (1930.48 to 1989.52 MHz) (1930.48 to 1989.52 MHz) 1.2 50Ω (1930.48 to 1989.52 MHz) 180±7deg. 1.8 dB max. Balance Port Matching Impedance (nominal) 180±7deg.Phase Balance Unbalance Port Matching Impedance (nominal) (0.15) 0.5max. (0.05) (1) (2) (3) (4) (5) 2-0.20±0.03 2-0.20±0.03 5-0.20±0.03 5-0.25±0.03 2-0.25±0.03 (0.075) 1.10±0.05 0.90±0.05 Dot Marking( φ0.2) (1) (2) (3) (4) (5) H 9 Marking: Laser Printing : EIAJ Code (Refer to the table 1) $ : Date Code (Refer to the table 2) TopView BottomView X * Integration calculation (dB INT ):

Aug. 1, 2017 SAW FILTER FOR UMTS Band2 Rx Murata part number : SAFFB1G96FN0F0A Frequency Performance Amplitude Balance Phase Balance

Aug. 1, 2017 SAW FILTER FOR UMTS Band2 Rx Murata part number : SAFFB1G96FN0F0A Dimensions of Carrier Tape Dimensions of Reel Dimensions of Tape 160...190 80...120 400...560 Trailer tape Components Leader Cavity Unit: mm Unit: mm Unit: mm 2.0±0.5 9.0±0.5 13.5max. (φ60) (φ 178) φ13.0±0.5 SAFFB1G96FN0F0AR1X uelipsis 10000pcs/reel (φ1789 SAFFB1G96FN0F0AR1S uelipsis sample Order (φ1789 A: 8.0 B: 1.75 C: 3.50 D: 4.0 E: 2.00 F: 2.0 G: φ1.5 H: 0.75 J: 1.05 K: 1.25 L: 0.55

Aug. 1, 2017 SAW FILTER FOR UMTS Band2 Rx Murata part number : SAFFB1G96FN0F0A Recommended Land Pattern Test Circuit : Land Pattern Unit : mm 1.1 2-0.20 2-0.20 2-0.25 2-0.20 0.25 4-0.325 0.9 0.25 BottomView TopView R2L1 R1 5 4 2 3 50Ω 22nH 100Ω

Aug. 1, 2017 SAW FILTER FOR UMTS Band2 Rx Murata part number : SAFFB1G96FN0F0A RoHS Compliance This component is compliant with RoHS directive. This component was always RoHS compliant from the first date of manufacture. This rule of code is applied repeatedly every four year. * : EIAJ Code Table 1 Marking code $: Date Code Table 2 date 1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th code A B C D E F G H J K date 11th 12th 13th 14th 15th 16th 17th 18th 19th 20th code L M N P Q R S T U V date 21st 22nd 23rd 24th 25th 26th 27th 28th 29th 30th 31st code W X Y Z a b c d e f g ・ Caution - Limitation of Applications This product is intended for the following applications only; however, please do not use this product in these applications where defects might directly cause damage to a third party’s life, body or property. a. Mobile Telephone b. Cordless phone (except for Automotive use9 c. PC (Including Notebook PC, Netbook PC, Tablet9 d. Game e. Camera (except for Business/security use9 f. Set Top Box g. Electronic dictionary h. Digital audio equipment ・This catalog is for reference only and not an official product specification document, therefore, please review and approve our official product specification before ordering this product.

Aug. 1, 2017 SAW FILTER FOR UMTS Band2 Rx Murata part number : SAFFB1G96FN0F0A /square6Important notice Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product when our product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our product deviating from the condition and the environment specified in this specification. Please note that the only warranty that we provide regarding the products is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this specification. WE HEREBY DISCLAIM ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The product shall not be used in any application listed below which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party's life, body or property. You acknowledge and agree that, if you use our products in such applications, we will not be responsible for any failure to meet such requirements. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH APPLICATIONS. - Aircraft equipment - Aerospace equipment - Undersea equipment - Power plant control equipment - Medical equipment - Transportation equipment (vehicles, trains, ships, elevator, etc.9 - Traffic signal equipment - Disaster prevention / crime prevention equipment - Burning / explosion control equipment - Application of similar complexity and/ or reliability requirements to the applications listed in the above We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing our product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. Please do not use the product in molding condition This product is ESD (ElectroStatic Discharge9 sensitive device. When you install or measure this, you should be careful not to add antistatic electricity or high voltage. Please be advised that you had better check anti serge voltage. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property.

Aug. 1, 2017 SAW FILTER FOR UMTS Band2 Rx Murata part number : SAFFB1G96FN0F0A Please do not use our products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged defect of Products only at the level required for consumer grade Products, and thus such analysis may not always be available or be in accordance with your request (for example, in cases where the defect was caused by components in Products supplied to Murata from a third party9. By signing on specification sheet or approval sheet, you acknowledge that you are the legal representative for your company and that you understand and accept the validity of the contents herein. When you are not able to return the signed version of specification sheet or approval sheet within 90 days from receiving date of specification sheet or approval sheet, it shall be deemed to be your consent on the content of specification sheet or approval sheet. The product shall not be used in any other application/model than that of claimed to Murata. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. In particular we disclaim liability for damages caused by

  • the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the product to be sold by you,
  • deviation or lapse in function of engineering sample,
  • improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you cannot agree the above contents, you should inquire our sales.