SAA1029 COMSET | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

UNIVERSAL INDUSTRIAL LOGIC AND INTERFACE CIRCUIT GENERAL DESCRIPTION The SAA1029 is a universal bipolar logic and interface IC with high noise immunity and operational stability for industr ial control applica tions. The most fundamental industrial control functions can be accomplished with only one SAA1029 IC. MAIN ADVANTAGES

  • Simple realization of the basic industr ial control functions ( logic functions, timing functions, memory functions).
  • High dynamic and static noise immunity.
  • High operation stability.
  • Short-circut protection of inputs and outputs to both VEE and VCC.
  • Wide interruption results in a safe input LOW state.
  • LOCMOS (CMOS) compatible.
  • Ideal applicaion for control loop such as emergency push button.
  • Wide imput range from 0 to 31.2 V.
  • Adjustable output voltage range from 0 to 30 V.
  • Wide supply voltage range from 14 to 31.2 V. The IC comprises, (1) Gate 1 : 4-input AND gate with 1 inverted input, (2) Gate 2 : 3-input AND gate with 1 inverted input and ajustable propagation delay, (3) Gate 3 : 2-input AND gate with 1 inverted input. The SAA1029 can be used as di rect interface with LOCMOS (CMOS) ICs for realizing more complex functions. Therefore, th e output signal can be limited to the voltage level of the common output clamping pin Z. The propagation delay of NAND gate 2 is adjustable from microsecondes to seconds by using an external capacitor at pin 7 (pin C) . This makes it possible to adapt the control frequency limits to the system, so the optimum dynamic noise immunity can be achieved. All the static and dynamic circuit values ( including the output voltage) are independent of the supply voltage over a wide operating range. This allows the use of a simple unstabilized power supply. The output is held to the LOW state automa tically during swithching on the power supply, so a special reset pulse can be omitted. COMSET SEMICONDUCTORS 11 dec. 03 1/3

Supply voltage range V CC 14 to 31,2V Operating ambient temperature range T amb -30 to +85°C Input voltage HIGH V IH 6,5 to 44V Output voltage HIGH (without clamping) V OH 13 to 30V Output voltage HIGH (without clamping at pin Z) V OH 2,0 to (VCC –0,7)V Input current I I max. 10mA Quiescent supply current I CC typ. 6,5mA PACKAGE OUTLINE 16-lead DIL ; plastic (SOT38). COMSET SEMICONDUCTORS 11 dec. 03 2/3

CHARACTERISTICS : At Tamb : -30 to +85°C/ Vcc 14V to 31,2V PARAMETER CONDITIONS SYMB MIN TYP MAX UNIT SUPPLY VOLTAGE VCC 14 - 31,2 V OUTPUT CLAMPING VOLTAGE VZ=VCC -1V V Z -- 3 0 V INPUT VOLTAGE LOW VIL --5 V INPUT VOLTAGE HIGH VIH 6,5 - - V CURRENT CONSOMATION VCC :31V ; Tamb :25°C I CC - 6,5 12,2 mA INPUT CURRENT HIGH VCC :24V ; Tamb :25°C I IH 0,3 - - mA INPUT CURRENT LOW VCC :24V ; Tamb :25°C -I IL -- 0 , 1 m A OUTPUT VOLTAGE WHITHOUT CLAMPING HIGH (Pin 14 open) VCC :24V -IO :5 mA VOH VCC -1,4V - - V IO :1,32 mA VOL --1 V OUTPUT VOLTAGE WHITHOUT CLAMPING LOW (Pin 14 open) V CC :24V IO :2,91 mA VOL -- 1 , 5 V IO :1,32 mA VOL --1 V OUTPUT VOLTAGE WHIT CLAMPING LOW (Pin 14 =VZ) IO :1,91 mA VOL -- 1 , 5 V IO: 0 mA VOH VZ-0,475 - V Z+0,225 V -IO : 1 mA V OH VZ-0,455 - V Z+0,12 V OUTPUT VOLTAGE WHIT CLAMPING HIGH (Pin 14 =V VCC:31,2V VZ< VCC-1V -IO : 3 mA V OH VZ-0,41 - V Z+0,055 V OUTPUT SHORT-CIRCULT CURRENT LOW SIGNAL VCC :24V ; Tamb :25°C I 0scL 2,95 - 9,6 mA HIGH SIGNAL VCC :24V ; Tamb :25°C -I 0scH 2,95 - 9,6 mA PROPAGATION DELAYS Tamb :25°C Vcc 24V HIGH TO LOW C :47nF t PHL 1,85 - 5,2 ms GATE 2 LOW TO HIGH C :47nF t PLH 7.5 - 14 ms HIGH TO LOW C :0nF t PHL -3 , 5- µ s GATE 1,2,3 LOW TO HIGH C :0nF t PLH -3 , 5- µ s COMSET SEMICONDUCTORS 11 dec. 03 3/3