S8046 HAMAMATSU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

/K6C Sleeping mode (low power dissipation) /K6C 4 to 50 Mbps /K6C Monolithic photo IC /K6C High reliability /K6C TTL output /K6C Wide dynamic range /K6C Designed to be used with L8045

Applications

/K6C High-speed data transmission even under poor environmental conditions with high noise I Absolute maximum ratings (Ta=25 °C) Parameter S ymbol Value Unit Supply voltage Vcc -0.5 to +7.0 V Output voltage Vo -0.5 to Vcc+0.5 V Output current Io 10 mA Power dissipation P 250 * 1 mW Operating temperature T opr -40 to +85 °C Storage temperature Tstg -40 to +85 °C Soldering - 230 °C, 5 s, at least 1.8 mm awa y from packa ge surface - *1: Derate power dissipation at a rate of -1.75 mW/°C above T a=25 °C I Electrical and optical characteristics (Ta=25 °C, Vcc=4.5 to 5.5 V) Parameter S ymbol Condition Min. Typ Max. Unit Data rate fD bi-phase signal 4 - 50 Mbps Current consumption (in operation mode ) Icco *2, 3 - - 40 mA Current consumption (in sleepin g mode ) Iccs Pin= - ∞ - - 100 µA Minimum overload Pimax *2, 3, 5, 6 -8 - - dBm Minimum receiver input power Pimin * 2, 3, 5, 6 - - -28.0 dBm H level output voltage Voh Ioh= -150 µA *2, 3 2.7 - - V L level output voltage Vol Iol=1.6 mA *2, 3 -- 0 . 4 V Rise time tr - - 5 ns Output volta ge Fall time tf 20 to 80 % *2, 3 -- 5n s Pulse width distortion ∆ t *2, 3 -4 - +8 ns Jitter ∆ tj *2, 3 -- 5n s Operation mode to sleeping mode switching input power Psl *2, 3, 5 - - -33 dBm Sleeping mode to operation mode switching input power Pop * 2, 3, 5 -- - 3 0 d B m Sleeping mode to operation mode switching time tso *2 - - 200 µs Operation mode to sleeping mode switching time tos * 2 - - 500 µs H level voltage Vmh *7 3.0 - - VMode output L level voltage Vml * 7 -- 0 . 5 V *2: Input is a pseudo-random bi-phase signal at 50 Mbps. *3: C L=5 pF (including parasitic capacitance of probes, connectors and PC board) *4: Optical input signal is generated by our standard signal generator. *5: Average value (at 50 % duty ratio) *6: Pe=10 -9 *7: “H” in sleeping mode, “L” in operation mode Note)

  • A bypass capacitor (0.1 µF) and another capacitor (4.7 µF) are connected between Vcc and GND at a position within 3 mm from the lead.
  • The center of the optical fiber is aligned with the center of the lens on the package. The distance between the fiber end and the lens is 0.1 mm.
  • Output becomes undefined at a baud rate less than 4 Mbps.

HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K. Cat. No. KPIC1041E06 Jun. 2006 DN Photo IC for optical link S8046 I Mode switching chart 5.0 4.5 ± 0.3 (INCLUDING BURR) 5.2 ± 0.3 (INCLUDING BURR) 0.5 1.27 (SPECIFIED AT THE LEAD OUT) 1.27 1.27 0.4 1.4(2.15)(1.5) 6.6 ± 0.4 4.3 (0.9) 10˚ 10˚ 5.0 Tolerance unless otherwise noted: ±0.1, ±0.2˚ Shaded area indicates burr. Values in parentheses indicate reference value. (0.9) MODEOUT GND Vout Vcc 1.77 0.97 0.69 10˚ (0.9) 4.3 0.25 10˚ 1.8 tso NOT FIXED NOT FIXED OPTICAL INPUT INPUT SIGNAL DATA Vml Vmh Voh Vol NO INPUT SIGNAL MODE OUTPUT OUTPUT VOLTAGE OUTPUT DATA tos I Dimensional outline (unit: mm) KPICC0066EA KPICA0042EC