DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

MAXIMUM RATINGS (Absolute maximum values) CHARACTERISTlCS (at 25 °C) NOTES Averaged over any interval of 30 seconds maximum. The light source is a tungsten filament lamp operated at a distribution temperature of 2856 K. Supply voltage is 100 V between the cathode and all other electrodes connected together as anode. Red / White ratio is the quotient of the cathode current measured using a red filter (Toshiba R-68) interposed between the light source and the tube by the cathode current measured with the filter removed under the same conditions as Note B. The value is cathode output current when a blue filter (Corning CS 5-58 polished to 1/2 stock thickness) is interposed between the light source and the tube under the same condition as Note B. Measured with the same light source as Note B and with the voltage distribution ratio shown in Table 1 below. Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 P Ratio 1 111111111 SuppIy Voltage: 1000 V, K: Cathode, Dy: Dynode, P: Anode Table 1:Voltage distribution ratio After 30 min Storage in Darkness The rise time is the time for the output pulse to rise from 10 % to 90 % of the peak amplitude when the entire photocathode is illuminated by a delta function light pulse. The electron transit time is the interval between the arrival of delta function light pulse at the entrance window of the tube and the time when the anode output reaches the peak amplitube. In measurement, the whole photocathode is illuminated. Also called transit time jitter. This is the fluctuation in electron transit time between individual pulses in the signal photoelectron mode, and is defined as the FWHM of the frequency distribution of electron transit times PHOTOMULTIPLIER TUBE R10699 Value 1250 250 0.1 V V mA UnitParameter Supply voltage Average anode current A Typ. Max. Unit µA/lm mA/W mA/W A/lm nA ns ns ns 650 0.43 8500 1.3 × 10 2.0 2.2 1.2 Min. Quantum efficiency Luminous B Radiant Red / white ratio C Blue sensitivity index D Luminous E Anode pulse rise time G Electron transit time H Transit time spread (T.T.S.) I at 600 nm at 780 nm at 600 nm at 780 nm 620 1600 Parameter Cathode sensitivity Anode sensitivity Gain E Anode dark current F (Supply voltage at 1 × 106 gain) Time response SPECIFICATIONS Between anode and cathode Between anode and last dynode Parameter Description / value Unit Spectral response Wavelength of maximum response Photocathode Window material Dynode Direct interelectrode capacitances Base Weight Operating ambient temperature Storage temperature SuitabIe socket SuitabIe socket assembly 185 to 900 450 Multialkali 8 × 24 UV glass Circular-cage 11-pin base JEDEC No. B11-88 Approx. 45 -30 to +50 -30 to +50 E678–11A (Sold separately) E717–63 (Sold separately) nm nm mm pF pF g MateriaI Minimum effective area Structure Number of stages Anode to last dynode Anode to all other electrodes

Figure 7: Dimensional outline and basing diagram (Unit: mm) Figure 8: Accessories (Unit: mm) Sold separately Warning–Personal Safety Hazards Electrical Shock –Operating voltages applied to this device present a shock hazard. TACCA0002EH TPMSA0008EA TPMSA0009EB TACCA0064EA 3.5 418 * Hamamatsu also provides C4900 series compact high voltage power supplies and C12597-01 series DP type socket assemblies which incorporate a DC to DC converter type high voltage power supply. POTTING COMPOUND R1 to R10 C1 to C3 : 330 kΩ : 10 nF 3.5 33.0 ± 0.3 49.0 ± 0.3 29.0 ± 0.3 38.0 ± 0.3 40.7 30.0450 ± 10 31.0 ± 0.5 HOUSING (INSULATOR) R10 DY9 DY8 DY7 DY6 DY5 DY4 DY3 DY2 DY1 SIGNAL GND SIGNAL OUTPUT RG-174/U(BLACK) -HV AWG22 (VIOLET) P K POWER SUPPLY GND AWG22 (BLACK) SOCKET PIN No.PMT D type socket assembly E717-63Socket E678-11A 5 76 KDY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 P DIRECTION OF LIGHT 28.5 ± 1.5 8 MIN. PHOTOCATHODE 24 MIN. 49.0 ± 2.5 80 MAX. 94 MAX. 32.2 ± 0.5

11 PIN BASE

JEDEC No. B11-88 Bottom View (Basing Diagram) Cross Section 3.25 6.0 3.52.5 PHOTO - CATHODE PHOTOMULTIPLIER TUBE R10699 TPMS1074E02 AUG. 2015 IP HAMAMATSU PHOTONICS K.K. HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se