S7141-10 HAMAMATSU | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/K6C DC to 50 Mbps data transmission /K6C Miniature size due to monolithic IC structure /K6C Inversion logic /K6C Digital output /K6C Designed to be used with L8045
Applications
/K6C Data transmission in FA or OA applications subject to large amounts of electro magnetic noise /K6C High-speed, short distance data transmission /K6C Burst data transmission 1.8 V 1.5 V 1.2 V tr tf pw ∆T = pw1 - pw I Input optical waveform definition pw1 tr=2 ns tf=5 ns 80 % 50 % 20 % I Output optical waveform definition 5 ns/div. KPICC0023EBKPICC0022EA I S7141-10 output waveform example (Input light is referenced by drive circuit on front page) (Ta=25 °C, Pi= -16 dBm, Vcc=5.0 V) KPICC0068EA I Electrical and optical characteristics (Ta=25 °C) Parameter Symbol Condition Min. Typ. Max. Unit Data rate f D DC 50 Mbps Supply voltage Vcc 4.75 - 5.25 V Current consumption Icc Without light input - - 32 mA Pulse width distortion ∆ T -6 - +6 ns Minimum overload Pimax * 2, *3 -5 - - dBm Minimum receiver input power Pimin *2, *3 - - -17.5 dBm Rise time tr * 3 --7 n s Fall time tf *3 - - 7 ns Voh Ioh=20 µA 2 - - VOutput voltage Vol Iol= -0.6 mA * 4 --1 V *2: Output from a 1 meter long plastic fiber (GH4001 made by Mitsubishi Rayon) set close to the molded lens. *3: Evaluated based on the input/output waveforms shown below. Measured with a low-capacitance FET probe (3 pF or less). *4: Output is the “L” level (inversion logic) when light is input. I Absolute maximum ratings (Ta=25 °C) Parameter Symbol Value Unit Power supply Vcc -0.5 to +7 V Output current Ioh 10 mA Power dissipation * 1 P 250 mW Operating temperature Topr -10 to +70 °C Storage temperature Tstg -40 to +85 °C Soldering - 230 °C, 5 s, at least 1.5 mm away from package surface - *1: Derate power dissipation at a rate of 1.75 mW/ °C above Ta=25 °C
HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K. Cat. No. KPIC1039E06 Jun. 2006 DN Photo IC for optical link S7141-10 I Dimensional outline (unit: mm) 5.0 4.5 ± 0.3 (INCLUDING BURR) 5.2 ± 0.3 (INCLUDING BURR) 0.5 1.27 (SPECIFIED AT THE LEAD ROOT) 1.27 1.27 0.4 1.4(2.15)(1.5) 6.6 ± 0.4 4.3 (0.9) 10˚ 10˚ 5.0 Lens tip does not project over surface B. Tolerance unless otherwise noted: ±0.1, ±2˚ Shaded area indicates burr. Values in parentheses indicate reference value. (0.9) GND OUT GND Vcc 1.77 0.97 0.69 10˚ (0.9) 4.3 0.25 10˚ Detail of part A 1.8 A Surface B 0.25 1.24 1.8 0.66 0.2 KPICA0043EE