S5990-01 HAMAMATSU | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/K6C Large active area S5990-01: 4 × 4 mm S5991-01: 9 × 9 mm /K6C Chip carrier package for surface mounting (automatic mounting with solder reflow) thin package: 1.26 mmt /K6C Improved tetra-lateral type (pin-cushion type) delivers superior position detection /K6C Evaluation circuit boards provided C4674 (DC signal processing circuit) C7563 (AC signal processing circuit)
Applications
/K6C Spot light detection /K6C Pointing device (computer mouse, track-ball) /K6C Position measurement PSD Two-dimensional PSD Improved tetra-lateral type for surface mounting S5990-01, S5991-01 I /G20/G41/G62/G73/G6F/G6C/G75/G74/G65/G20/G6D/G61/G78/G69/G6D/G75/G6D/G20/G72/G61/G74/G69/G6E/G67/G73/G20/G28/G54/G61/G3D/G32/G35/G20°/G43/G29 /G50/G61/G72/G61/G6D/G65/G74/G65/G72/G53/G79/G6D/G62/G6F/G6C /G56/G61/G6C/G75/G65 /G55/G6E/G69/G74 /G52/G65/G76/G65/G72/G73/G65/G20/G76/G6F/G6C/G74/G61/G67/G65 /G56/G52/G20/G4D/G61/G78/G2E/G32/G30 /G56 /G4F/G70/G65/G72/G61/G74/G69/G6E/G67/G20/G74/G65/G6D/G70/G65/G72/G61/G74/G75/G72/G65/G54/G6F/G70/G72 /G2D/G32/G30/G20/G74/G6F/G20/G2B/G36/G30 /GB0/G43 /G53/G74/G6F/G72/G61/G67/G65/G20/G74/G65/G6D/G70/G65/G72/G61/G74/G75/G72/G65 /G54/G73/G74/G67 /G2D/G32/G30/G20/G74/G6F/G20/G2B/G38/G30 /GB0/G43 I /G20/G45/G6C/G65/G63/G74/G72/G69/G63/G61/G6C/G20/G61/G6E/G64/G20/G6F/G70/G74/G69/G63/G61/G6C/G20/G63/G68/G61/G72/G61/G63/G74/G65/G72/G69/G73/G74/G69/G63/G73/G20/G28/G54/G61/G3D/G32/G35/G20°/G43/G29 /G53/G35/G39/G39/G30/G2D/G30/G31/G53/G35/G39/G39/G31/G2D/G30/G31/G50/G61/G72/G61/G6D/G65/G74/G65/G72/G53/G79/G6D/G62/G6F/G6C/G43/G6F/G6E/G64/G69/G74/G69/G6F/G6E/G4D/G69/G6E/G2E/G54/G79/G70/G2E/G4D/G61/G78/G2E/G4D/G69/G6E/G2E/G54/G79/G70/G2E/G4D/G61/G78/G2E/G55/G6E/G69/G74 /G53/G70/G65/G63/G74/G72/G61/G6C/G20/G72/G65/G73/G70/G6F/G6E/G73/G65/G20/G72/G61/G6E/G67/G65λ /G2D /G33/G32/G30/G20/G74/G6F /G31/G31/G30/G30/G2D/G2D /G33/G32/G30/G20/G74/G6F /G31/G31/G30/G30/G2D/G6E /G6D /G50/G65/G61/G6B/G20/G73/G65/G6E/G73/G69/G74/G69/G76/G69/G74/G79/G20/G77/G61/G76/G65/G6C/G65/G6E/G67/G74/G68λ/G70 /G2D /G39/G36/G30/G2D /G2D /G39/G36/G30/G2D /G6E/G6D /G50/G68/G6F/G74/G6F/G20/G73/G65/G6E/G73/G69/G74/G69/G76/G69/G74/G79 /G53λ/G3Dλ/G70 /G2D /G30 /G2E/G36/G2D /G2D/G30 /G2E/G36/G2D /G41 /G2F /G57 /G49/G6E/G74/G65/G72/G65/G6C/G65/G63/G74/G72/G6F/G64/G65/G20/G72/G65/G73/G69/G73/G74/G61/G6E/G63/G65/G52/G69/G65/G56/G62/G3D/G30/G2E/G31/G20/G56/G35 /G37 /G31/G35/G35 /G37 /G31/G35/G6BΩ /G50/G6F/G73/G69/G74/G69/G6F/G6E/G20/G64/G65/G74/G65/G63/G74/G69/G6F/G6E/G20/G65/G72/G72/G6F/G72 /G45 λ/G3D/G39/G30/G30/G20/G6E/G6D /G56/G52/G3D/G35/G20/G56/G2C/G20/G73/G70/G6F/G74/G20/G6C/G69/G67/G68/G74 /G73/G69/G7A/G65/G3A/G20φ/G30/G2E/G32/G20/G6D/G6D/G20/G2A /G2D ±/G37/G30±/G31/G35/G30/G2D ±/G31/G35/G30±/G32/G35/G30µ/G6D /G53/G61/G74/G75/G72/G61/G74/G69/G6F/G6E/G20/G70/G68/G6F/G74/G6F/G63/G75/G72/G72/G65/G6E/G74/G49/G73/G74λ/G3D/G39/G30/G30/G20/G6E/G6D/G2C/G20/G56/G52/G3D/G35/G20/G56 /G52/G4C/G3D/G31/G20/G6BΩ /G2D /G35/G30/G30/G2D /G2D /G35/G30/G30/G2D µ/G41 /G44/G61/G72/G6B/G20/G63/G75/G72/G72/G65/G6E/G74 /G49/G44 /G56/G52/G3D/G35/G20/G56 /G2D /G30/G2E/G35 /G31/G30 /G2D /G31 /G35/G30 /G6E/G41 /G52/G69/G73/G65/G20/G74/G69/G6D/G65/G74/G72/G56/G52/G3D/G35/G20/G56/G2C/G20/G52/G4C/G3D/G31/G20/G6BΩ λ/G3D/G39/G30/G30/G20/G6E/G6D/G2D /G31 /G2D /G2D /G32 /G2D µ/G73 /G54/G65/G72/G6D/G69/G6E/G61/G6C/G20/G63/G61/G70/G61/G63/G69/G74/G61/G6E/G63/G65 /G43/G74 /G56/G52/G3D/G35/G20/G56/G2C/G20/G66/G3D/G31/G30/G20/G6B/G48/G7A /G2D /G31/G35/G30 /G33/G30/G30 /G2D /G35/G30/G30 /G31/G30/G30/G30 /G70/G46 /G50/G6F/G73/G69/G74/G69/G6F/G6E/G20/G72/G65/G73/G6F/G6C/G75/G74/G69/G6F/G6E∆/G52 /G49/G6F/G3D/G31/G20µ/G41/G2C/G20/G42/G3D/G31/G20/G6B/G48/G7A/G20/G2A/G2D /G30/G2E/G37/G2D /G2D /G31/G2E/G35/G2D µ/G6D /G2A/G20/G49/G6E/G20/G74/G68/G65/G20/G72/G61/G6E/G67/G65/G20/G74/G68/G61/G74/G20/G69/G73/G20/G38/G30/G20/G25/G20/G66/G72/G6F/G6D/G20/G74/G68/G65/G20/G63/G65/G6E/G74/G65/G72/G20/G74/G6F/G20/G74/G68/G65/G20/G65/G64/G67/G65/G2E/G20/G52/G65/G63/G6F/G6D/G6D/G65/G6E/G64/G65/G64/G20/G73/G70/G6F/G74/G20/G6C/G69/G67/G68/G74/G20/G73/G69/G7A/G65/G20/G69/G73/G20/G6C/G61/G72/G67/G65/G72/G20/G74/G68/G61/G6E/G20φ/G30/G2E/G32/G20/G6D/G6D/G2E
Two-dimensional PSD S5990-01, S5991-01 HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, http://www.hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K. Cat. No. KPSD1010E03 Apr. 2001 DN The burr of 0.3 mm maximum on each side should be allowed pin should be open-circuited ANODE X1 (I1) NC NC NC ANODE Y1 (I ANODE X2 (I2) NC CATHODE NC ANODE Y2 (I ANODE X1 (I1) NC NC NC ANODE Y1 (I ANODE X2 (I2) NC CATHODE NC ANODE Y2 (I The burr of 0.3 mm maximum on each side should be allowed pin should be open-circuited 1.8 2.54 3.0 0.46 1.26 ± 0.15 (10 ×) 1.2 14.5 ± 0.2 1.8 ACTIVE AREA PHOTOSENSITIVE SURFACE SILICONE RESIN /K6F 9.0 X2X1 çç I /G20Spectral response I /G20Dimensional outlines (unit: mm) KPSDB0026EA KPSDA0044EA 300 400 500 600 700 800 WAVELENGTH (nm) PHOTO SENSITIVITY (A/W) 900 1000 1100 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 (Typ. Ta=25 ˚C) I /G20Dark current vs. reverse voltage KPSDB0068EA I /G20Terminal capacitance vs. reverse voltage KPSDB0073EA 10 nA 1 nA 100 pADARK CURRENT REVERSE VOLTAGE (V) 10 pA 1 pA 0.1 1 10 100 S5990-01 S5991-01 (Typ. Ta=25 ˚C) 0.1 1 10 100 10 pF 100 pF 1 nF 10 nF REVERSE VOLTAGE (V) TERMINAL CAPACITANCE (Typ. Ta=25 ˚C) S5991-01 S5990-01 I /G20Example of position detectability (Ta=25 °C, λ=830 nm, Spot light size: φ0.2 mm) (SCAN INTERVAL: 0.4 mm) (SCAN INTERVAL: 1 mm) 8.8 ± 0.15 1.5 1.27 1.5 2.5 0.46 1.26 ± 0.15 (10 ×) 0.6 SILICONE RESIN PHOTOSENSITIVE SURFACE ACTIVE AREA /K6F 4.0 KPSDA0045EA /G53/G35/G39/G39/G30/G2D/G30/G31/G53/G35/G39/G39/G31/G2D/G30/G31 /G53/G35/G39/G39/G30/G2D/G30/G31 /G53/G35/G39/G39/G31/G2D/G30/G31 I Conversion formula KPSDC0064EA KPSDC0065EA x, y: position coordinate of spot light S5990-01: L=4.5 mm S5991-01: L=10 mm I1 + I2 + I3 + I4 L= I1 + I2 + I3 + I4 L= G The light input window of this product uses soft silicone resin. Avoid touching the window to keep it from grime and damage that can decrease sensitivity. External force applied to the resin surface may deform or cut off the wires, so do not touch the window to prevent such troubles. G Use rosin flux when soldering, to prevent the terminal lead corrosion. Reflow oven temperature should be at 260 °C maximum for 5 seconds maximum time under the conditions that no moisture absorption occurs. Reflow soldering conditions differ depending on the type of PC board and reflow oven. Carefully check these conditions before use. G Silicone resin swells when it absorbs organic solvent, so do not use any solvent other than alcohol. G Avoid unpacking until you actually use this product to prevent the terminals from oxidation and dust deposits or the coated resin from absorbing moisture. When the product is stored for 3 months while not unpacked or 24 hours have elapsed after unpacking, perform baking in nitrogen atmosphere at 150 °C for 3 to 5 hours or at 120 °C for 12 to 15 hours before use. /G50/G72/G65/G63/G61/G75/G74/G69/G6F/G6E/G73/G20/G66/G6F/G72/G20/G75/G73/G65