S2S3 SHARP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Outline Dimensions (Unit : mm)Features Application Model Line-ups C0.4 4.4± 0.2 0.4± 0.1 3.6± 0.3 2.6± 0.20.1± 0.1 5.3± 0.3 0.2± 0.05 7.0+ 0.2 - 0.7 0.5+ 0.4 - 0.2 0.6MAX. Zero-cross circuit Model No. Anode mark (Input side) (Ta=25˚C) (A) 0 θ 2 • IT IT 360˚90˚ 180˚ θ1, θ2<= 90˚ Absolute Maximum Ratings 3443 2 2 Internal connection diagram S2S3/S2S4 S2S3/S2S4 Mini-Flat Type Phototriac Coupler
1 Anode
4 Anode/
- For SSR * The zero-cross circuit for S2S4For 100/200V line
3 Anode/
2 Cathode
0.2 mm or more Rating Forward current IF 50 mA Reverse voltage V R 6 V RMS ON-state current*1 IT 0.05 A rms *2 Peak one cycle surge current Isurge 0.6 (50Hz sine wave) A Repetitive peak OFF-state voltageV DRM 600 V Isolation voltage*3 V iso 3 750 V rms Operating temperature Topr - 30 to+100 ˚C Storage temperature Tstg - 40 to+125 ˚C *4 Tsol 260 ˚C Input Output Symbol UnitParameter 2.54± 0.25 1. Popular type 2. Small package type Conforming to UL double protective insulation (Viso : 3 750Vrms) 4.Infrared reflow soldering type (230˚C, within 30 seconds) Soldering temperature *1 The definition of conduction angleθ of RMS ON-state current IT should be as shown in the right drawing. For decrease curve, refer to Fig. 2. *2 50Hz sine curve *3 40 to 60% RH, AC for 1 minute *4 For 10 seconds 5. Recognized by UL (No.64380) nn n n n data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.” “ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
(Ta=25˚C)Electro-optical Characteristics -30 0 50 100 -300 0 50 100 MIN. TYP. MAX. Input Forward voltage V F IF = 20mA - 1.2 1.4 V Reverse current I R V R =3 V - - 1 0 µ A Output Repetitive peak OFF-state current IDRM --1 µ A ON-state voltage V T IT = 0.05A - - 2.5 V Holding current I H V D = 6V 0.1 - 3.5 mA Critical rate of rise of OFF-state voltage 2VDRM = 1/ • Rated 100 - V/ µ s Zero-cross voltage S2S4 V OX IF = 15mA, Resistance load - -3 5 V Transfer characteristics IFT V D = 6V, RL = 100Ω - - 10 mA Insulation resistance R ISO DC500V, 40 to 60% RH 5x1 010 111 x 10 - Ω Turn-on time S2S3 ton V D = 6V, RL = 100Ω , IF = 20mA - - 100 µ sS2S4 -- 5 0 S2S3/S2S4 Minimum trigger current V DRM = Rated Fig. 1 Forward Current vs. Ambient Temperature Fig. 2 RMS ON-state Current vs. Ambient Temperature Forward current IF (mA) Ambient temperature Ta (˚C) Ambient temperature Ta (˚C) 1 000 Symbol UnitParameter Conditions dv/dt RMS ON-state current IT (mArms) n