S2A HOTTECH | Alldatasheet
Document overview
- Manufacturer or author: user
- PDF pages: 2
Technical content
Page:P2-P1 Plastic-Encapsulate Diodes GUANGDONG HOTTECH INDUSTRIAL CO,. LTD. Surface Mount Rectifiers
FEATURES
For surface mounted application Low forward voltage drop High current capability Easy pick and place High surge current capability Plastic material used carries Underwriters Laboratory Classification 94V-O High temperature soldering: 260oC / 10 seconds at terminals MECHANICAL DATA Case: Molded plastic Case: Molded plastic Terminals: Solder plated Polarity: Indicated by cathode band Packaging: 12mm tape per EIA STD RS-481 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Type Number Symbol S2A S2B S2D S2G S2J S2K S2M Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TL =100℃ I(AV) 2.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM A Maximum Instantaneous Forward Voltage @ 2.0A VF 1.15 V Maximum DC Reverse Current @ TA =25℃ at Rated DC Blocking Voltage @ TA=125℃ IR 5.0 125 uA uA Typical Thermal Resistance (Note 3) RθJL RθJA 53 ℃/W Maximum Reverse Recovery Time ( Note 1 ) Trr 2.0 uS Typical Junction Capacitance ( Note 2 ) Cj 30 pF Operating Temperature Range TJ -55 to +150 ℃ Storage Temperature Range TSTG -55 to +150 ℃ DO-214AA (SMB) 0.083(2.11) 0.077(1.96) 0.155(3.94) 0.130(3.30) 0.180(4.57) 0.160(4.06) 0.096(2.44) 0.084(2.13) 0.060(1.52) 0.030(0.76) 0.012(0.305) 0.006(0.152) 0.220(5.59) 0.205(5.21) 0.008(0.203) 0.004(0.102) S2A---S2M
Page:P2-P2 Plastic-Encapsulate Diodes GUANGDONG HOTTECH INDUSTRIAL CO,. LTD. Typical Characteristics FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 10 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method FIG.4- TYPICAL REVERSE CHARACTERISTICS 0 20 40 60 80 100 120 140 0.01 0.1 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) Tj=125 C Tj=25 C Tj=100 C FIG.3- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.1 0.01 FORWARD VOLTAGE. (V) Tj=25 C PULSE WIDTH-300 S 2% DUTY CYCLE FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 1004020104210.40.20.1 100 REVERSE VOLTAGE. (V) Tj=25 C f=1.0MHz Vsig=50mVp-p FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 50 60 70 80 100 110 120 130 14090 150 LEAD TEMPERATURE. ( C) o SINGLE PHASE HALF SIZE WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 7.0mm PAD AREAS INSTANTANEOUS REVERSE CURRENT .( A ) 0.5 1.0 1.5 2.0 155 S2A---S2M