DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Features
2440MHz to 2750MHz Operation Gain=28dB Typical Gain Adjustment Range >19dB ACPR=-64dBc Typ. at +12dBm P OUT (Dual Carrier WCDMA) Small, 7mmx7mm, Multi-Chip Module
Applications
Cellular, 3G and 4G Infrastructure WiBro, WiMax, LTE Microwave Radio High Linearity Power Control DS111014 Package: MCM, 7mm x7mm RVA3007LAna- log Controlled Variable Gain Amplifier RVA3007LSQ Sample bag with 25 pieces RVA3007LSR 7” Sample reel with 100 pieces RVA3007LTR7 7” Reel with 1500 pieces RVA3007LTR13 13” Reel with 2500 pieces RVA3007LPCK-410 2440MHz to 2750MHz PCBA with 5-piece sample bag
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Absolute Maximum Ratings Parameter Rating Unit Max Device Current 770 mA Max Device Voltage 5.5 V Max Control Line Voltage 6 V Max RF Input Power* 12 dBm Max Junction Temp (T J)+ 1 5 0 ° C Max Storage Temp +150 °C Thermal Resistance (junction to backside of module) 14.8 °C/W ESD Class 1C (1000V min) Moisture Sensitivity Level MSL3 *Load condition: ZL=50 Parameter Specification Unit ConditionMin. Typ. Max. Frequency 2440 2750 MHz Temperature Range -40 25 +85 °C Operating range Gain 25 28 31 dB Min attenuator setting Nominal Operating Output Power 12 dBm Operating power for ACPR rating Output IP3 39 45 dBm In high gain setting P1dB 27 29.5 dBm High gain setting ACPR -58 -64 dBc Dual carrier WCDMA, 7.5dB CF at nominal operating power; over full attenuation range Gain Flatness 0.2 0.4 dB Over 50MHz BW Gain Adjustment Range 19 dB Control Voltage Range 0 3.3 V Noise Figure 5.0 6.5 dB Min attenuator setting Impedance 50 Input Return Loss 9 12 dB Over attenuation range Output Return Loss 11 18 dB Over attenuation range Supply Voltage 4.75 5.0 5.25 V Supply Current 300 410 550 mA Max current is at -40°C Supply Current (VPC=0V) 65 85 100 mA Output amplifier shutdown total current; VPC=0V Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical perfor- mance or functional operation of the device under Absolute Maximum Rating condi- tions is not implied. The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice. RoHS (Restriction of Hazardous Substances): Compliant per EU Directive 2002/95/EC.
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Evaluation Board Schematic Evaluation Board Bill of Materials (BOM) Description Reference Designator Manufacturer Manufacturer’s P/N EVALUATION BOARD DDI RFVAx007L410(A) CAP, 1F, 10%, 10V, X5R, 0402 C7, C9- C10 MURATA ELECTRONICS GRM155R61A105KE15D RES, 00402 R1 KAMAYA, INC RMC1/16SJPTH CONN, SMA, END LAUNCH, UNIV, HYB MNT, FLT J1-J2 HEILIND ELECTRONICS PER MAT-21-1038 CONN, HDR, ST, PLRZD, 4-PIN, 0.100” P2 ITW PANCON MPSS100-4-C CONN, HDR, ST, PLRZD, 2-PIN, 0.100” P1 ITW PANCON MPSS100-2-C DNP C1, C3-C4, C6, C11-C12, R3-R5 RVA3007L MODULE U1 RFMD RVA3007L
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Pin Table and Description Pin Function Description 1R F I N RF input pin. Internal DC block. 2G N D Ground pin. 3V P C Power up/down control for 2nd stage amplifier. Apply VCC to power on 2nd stage amplifier. Apply 0V to disable 2nd stage amplifier. Do not exceed VCC+0.5V. Connect to VCC if not needed. Decoupling capacitor may be desired on application board for control line noise. 4N C No connection. 5V C C Power supply for the module. Recommending 1uF decoupling cap on the application board. 6G N D Ground pin. 7R F O U T RF output pin. Internal DC block. 8V C T R L Gain control voltage; 0V to 3.3V range. Maximum gain at 0V. Recommending 0.1uF decoupling on the applica- tion board. Center Pad GND Center ground pads need to have a good thermal path on the application board. Use solder stencil pattern shown in the document to define solder paste during assembly.
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Application Schematic (Without using final stage amplifier power down control) Application Schematic (Using final stage amplifier power down control) 1 7 2GND 3VPC 4NC 5 6GND Voltage Variable Attenuator RF OUTRF IN 1 uF VCC VCNTRL 0.1 uF 1 7 2GND 3 4NC 5 6GND Voltage Variable Attenuator RF OUTRF IN 1 uF VCC VCNTRL 0.1 uF 0.1 uF VPC
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Package Drawing Branding Diagram
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. Evaluation Board Assembly Drawing PCB Design Requirements Note: This solder stencil pattern is required to prevent solder voiding that may impact thermal dissipation.