RTC100 SYSTEMSENSOR | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

RTC100 Remote Test Coil Kit for use with the Low Profile B114LP and B114LPBT Bases INSTALLATION AND MAINTENANCE INSTRUCTIONS 3825 Ohio Avenue, St. Charles, Illinois 60174 1-800-SENSOR2, FAX: 630-377-6495 NOTICE: This manual should be left with the owner/user of this equipment. General Description The System Sensor Model RTC100 Remote Test Coil Kit al- lows for the remote testing of duct smoke detectors using the B114LP (120 V AC) or B114LPBT (24 V AC/DC) bases when installed in inconvenient or difficult-to-reach loca - tions. Model RTC100 can be installed in almost any conve- nient location and can be attached to a standard 2 ″ × 4″ electrical box. The National Fire Protection Association has published standards and practices for the installation and use of this device. As a result, System Sensor recommends that the installer be familiar with these standards and practices, local codes, and any special requirements of the authority having jurisdiction. RTC100 Contents

1 RTS451 Remote Test Station

1 Test Coil Replacement Ring

1 Screw Pack (2 mounting Assembly screws)

1 Jumper with spade lugs

1 M02-04 Test Magnet

Installation of the Model RTC100 consists of attaching the test station to the mounting surface, mounting the test coil replacement ring on the detector, and routing the necessary wiring between them. This installation procedure assumes that the associated detector base is already installed and ready for operation. ALARM RESET M02-04 TEST MAGNET LOCATIONS Figure 1: H0235-00 Specifications Dimensions: 6.1″ diameter flanged base 1.66″ high RTS451 Power Requirements Alarm LED: 2.8 – 32 VDC, 10 mA max. Test Coil: 15.5 – 32 VDC, 95 mA max. Total Current: 105 mA max. Test Switch: 10 V A @ 32 VDC Reset Switch: 10 V A @ 32 VDC Alarm Response Time: 40 seconds max. Operating Temperature Range: –10°C to 60°C (14°F to 140°F) Humidity: 10 to 95% RH, noncondensing