RLC-IMS-61-050-0

RLC-IMS-61-050-0 POWERINT | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

www.power.com Parameter Symbol Conditions Min Max Units Absolute Maximum Ratings 1 Storage temperature Tst -40 85 °C Operating ambient temperature 2 TA -40 100 °C Relative humidity Hr No condensation 93 % Peak voltages between wires in cable Vmax -200 200 V Absolute Maximum Ratings Standards RLC-IMS-61-050-0 fulfills the following standards in combination with 1SP0630x2x1R and 1SP0635x2x1R products:

• IEC 61373:2010, Railway applications - Rolling stock equipment - Shock and vibration tests, class 1B
• IEC 60721-3-5, Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities, 5M2
• Plastic materials compliant to EN45545-2, HL3 (Hazard Level 3) Routine Test The following tests are performed before delivery:
• Continuity test
• Minimum impedance test to neighbor wires
• IPC/sWHMA-A-620, class 2 Transportation and Storage Conditions For transportation and storage conditions refer to Power Integrations’ Application Note AN-1501. RoHS Statement We hereby confirm that the product supplied does not contain any of the restricted substances according Article 4 of the RoHS Directive 2011/65/ EU in excess of the maximum concentration values tolerated by weight in any of their homogeneous materials. Additionally, the product complies with RoHS Directive 2015/863/EU (known as RoHS 3) from 31 March 2015, which amends Annex II of Directive 2011/65/EU. Rev. A 05/21 NOTES: 1. Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. 2. The maximum ambient temperature of the final product is 85°C. Part of the cable may however be exposed to higher temperatures due to self-heating of the product. RLC-IMS-61-050-0 Characteristics Parameter Symbol Conditions TA = -40 °C to 100 °C Min Typ Max Units Wire Wire Cross Section DCable 22 AWG Working voltage VWork 30 V Wire Length L see Figure 2 495 500 505 mm

www.power.com Notes Rev. A 05/21

5245 Hellyer Avenue

San Jose, CA 95138, USA Main: +1-408-414-9200 Customer Service: Worldwide: +1-65-635-64480 Americas: +1-408-414-9621 e-mail: usasales@power.com China (Shanghai) Rm 2410, Charity Plaza, No. 88 North Caoxi Road Shanghai, PRC 200030 Phone: +86-21-6354-6323 e-mail: chinasales@power.com China (Shenzhen) 17/F, Hivac Building, No. 2, Keji Nan 8th Road, Nanshan District, Shenzhen, China, 518057 Phone: +86-755-8672-8689 e-mail: chinasales@power.com Italy Via Milanese 20, 3rd. Fl.

20099 Sesto San Giovanni (MI) Italy

Phone: +39-024-550-8701 e-mail: eurosales@power.com Japan Yusen Shin-Yokohama 1-chome Bldg. 1-7-9, Shin-Yokohama, Kohoku-ku Yokohama-shi, Kanagawa 222-0033 Japan Phone: +81-45-471-1021 e-mail: japansales@power.com Korea RM 602, 6FL Korea City Air Terminal B/D, 159-6 Samsung-Dong, Kangnam-Gu, Seoul, 135-728, Korea Phone: +82-2-2016-6610 e-mail: koreasales@power.com Singapore

51 Newton Road

#19-01/05 Goldhill Plaza Singapore, 308900 Phone: +65-6358-2160 e-mail: singaporesales@power.com Taiwan 5F, No. 318, Nei Hu Rd., Sec. 1 Nei Hu Dist. Taipei 11493, Taiwan R.O.C. Phone: +886-2-2659-4570 e-mail: taiwansales@power.com UK Building 5, Suite 21 The Westbrook Centre Milton Road Cambridge CB4 1YG Phone: +44 (0) 7823-557484 e-mail: eurosales@power.com Power Integrations Worldwide Sales Support Locations Germany (AC-DC/LED Sales) Einsteinring 24

85609 Dornach/Aschheim

Tel: +49-89-5527-39100 e-mail: eurosales@power.com Germany (Gate Driver Sales) HellwegForum 3

59469 Ense

Tel: +49-2938-64-39990 e-mail: igbt-driver.sales@power.com India #1, 14th Main Road Vasanthanagar Bangalore-560052 India Phone: +91-80-4113-8020 e-mail: indiasales@power.com Revision Notes Date A Final Datasheet 05/21 For the latest updates, visit our website: www.power.com Power Integrations reserves the right to make changes to its products at any time to improve reliability or manufacturability. Power Integrations does not assume any liability arising from the use of any device or circuit described herein. POWER INTEGRATIONS MAKES NO WARRANTY HEREIN AND SPECIFICALLY DISCLAIMS ALL WARRANTIES INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. Patent Information The products and applications illustrated herein (including transformer construction and circuits external to the products) may be covered by one Power Integrations patents may be found at www.power.com. Power Integrations grants its customers a license under certain patent rights as set forth at www.power.com/ip.htm. Life Support Policy POWER INTEGRATIONS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF POWER INTEGRATIONS. As used herein: 1. A Life support device or system is one which, (i) is intended for surgical implant into the body, or (ii) supports or sustains life, and (iii) whose failure to perform, when properly used in accordance with instructions for use, can be reasonably expected to result in significant injury or death to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Power Integrations, the Power Integrations logo, CAPZero, ChiPhy, CHY, DPA-Switch, EcoSmart, E-Shield, eSIP, eSOP, HiperPLC, HiperPFS, HiperTFS, InnoSwitch, Innovation in Power Conversion, InSOP, LinkSwitch, LinkZero, LYTSwitch, SENZero, TinySwitch, TOPSwitch, PI, PI Expert, PowiGaN, SCALE, SCALE-1, SCALE-2, SCALE-3 and SCALE-iDriver, are trademarks of Power Integrations, Inc. Other trademarks are property of their respective companies. ©2021, Power Integrations, Inc.