DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

■ Low insertion loss: 0.29dB Typical at 2700MHz ■ High Port-to-Port Isolation: 29dB Typical at 2700MHz ■ Power Handling >35dBm ■ Very Low Current Consumption ■ 1.3V to 2.7V GPIO Compatible

Applications

■ Filter Switching ■ LNA Bypass Switching ■ Antenna Switching ■ Differential or Dual Path Switching RFSW6222

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS141028 trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 2 of 9 RFSW6222 Absolute Maximum Ratings Parameter Rating Unit Supply Voltage in Operating Mode 3.9 V Control Voltage (Digital Inputs) 3.0 dBm Maximum Input Power Momentary Infrequent Occurrence +38 (50Ω) +36 (6:1 VSWR) dBm Continuous Operation +36 (50Ω) +35 (6:1 VSWR) dBm Storage Temperature -65 to +150 °C ESD Rating - Human Body Model (HBM) Class 2 V Moisture Sensitivity Level MSL1 Caution! ESD sensitive device. RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this document revision), halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Recommended Operating Condition Parameter Specification Unit Min Typ Max Operating Temperature Range -30 25 +90 °C Operating Junction Temperature °C Switch Supply Voltage 2.4 2.8 3.5 V Nominal Operating Parameters Parameter Specification Unit Condition Min Typ Max Nominal Test Conditions Unless Otherwise State. VDD = 2.8V, VHIGH / VLOW = 1.8V / 0V, Temp = 25°C, 50Ω, Single-ended Data Frequency Range 50 2700 MHz Insertion Loss (RFX to RFXA/B) 0.26 0.40 dB 700MHz to 960MHz 0.26 0.45 dB 961MHz to 1710MHz 0.27 0.45 dB 1711MHz to 2170MHz 0.29 0.50 dB 2171MHz to 2700MHz Isolation (RF1 to RF1A/B) 31 40 dB 700MHz to 960MHz 25 36 dB 961MHz to 1710MHz 25 30 dB 1711MHz to 2170MHz 25 30 dB 2171MHz to 2700MHz Isolation (RF2 to RF2A/B) 31 40 dB 700MHz to 960MHz 25 35 dB 961MHz to 1710MHz 25 32 dB 1711MHz to 2170MHz 25 29 dB 2171MHz to 2700MHz

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS141028 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 9 RFSW6222 Parameter Specification Unit Condition Min Typ Max Continued Nominal Test Conditions Unless Otherwise State. VDD = 2.8V, VHIGH / VLOW = 1.8V / 0V, Temp = 25°C, 50Ω, Single-ended Data IP3 70 dBm 700MHz to 2700MHz, 35dBm Harmonics 2fo -79 dBc PIN = 26dBm, fo = 787MHz, 50Ω 3fo -84 dBc PIN = 26dBm, fo = 710MHz, 50Ω 2fo -84 -107 dBc PIN = 26dBm, fo = 915MHz, 50Ω 3fo -84 -106 dBc 2fo -76 -103 dBc PIN = 35dBm, fo = 915MHz, 50Ω 3fo -76 -90 dBc 2fo -86 -105 dBc PIN = 26dBm, fo = 1980MHz, 50Ω 3fo -86 -105 dBc 2fo -76 -99 dBc PIN = 32dBm, fo = 1980MHz, 50Ω 3fo -76 -94 dBc 2fo -86 -108 dBc PIN = 26dBm, fo = 2570MHz, 50Ω 3fo -86 -109 dBc 2fo -86 -109 dBc PIN = 26dBm, fo = 2690MHz, 50Ω 3fo -86 -105 dBc VSWR 1.1 1.3 700MHz to 960MHz 961MHz to 1710MHz 1711MHz to 2170MHz 2171MHz to 2700MHz Phase Balance -5 +5 Deg Operating Environment, Supply and Control Nominal Test Conditions Unless Otherwise State. VDD = 2.8V, VHIGH / VLOW = 1.8V / 0V, Temp = 25°C, 50Ω VDD Supply Current 90 110 µA LVC1-3, HVC1-3 – Control Voltage High 1.3 1.8 2.7 V LVC1-3, HVC1-3 – Control Voltage Low 0 0.45 V Control Current 1 µA Switching Speed 5 µs 10% to 90% RF

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS141028 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 9 RFSW6222 Control Logic Mode Bit (CB1) RF1 Mode RF2 Mode

0 RF1 to RF1A RF2 to RF2A

1 RF1 to RF1B RF2 to RF2B

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS141028 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 5 of 9 RFSW6222 Typical Performance: T = 25°C, VDD = 3.3V, singled-ended data unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS141028 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 6 of 9 RFSW6222 Evaluation Board Schematic 50MHz to 2700MHz Application Circuit Evaluation Board Bill of Materials (BOM) 50MHz to 2700MHz Application Circuit Description Reference Designator Manufacturer Manufacturer's P/N RFSW6222 Evaluation Board PCB Itself Viasystems Technologies Corp. RSW6222-410(A) General Purpose DPDT Switch U1 RFMD RFSW6222 CAP, 10000pF, 10%, X7R, 0402 C2 Murata Electronics GRM155R71E103KA01D CAP, 100pF, 5%, 50V, C0G, 0402 C1 Taiyo Yuden (USA), Inc. RM UMK105CG101JV-F CONN, SMA, END LNCH, MINI, FLT, 0.068” RF1, RF2, RF1A, RF1B, RF2A, RF2B Aliner Industries, Inc. 20-001CF-T CONN, HDR, ST, PLRZD, 4-PIN, 0.100” P1 ITW Pancon MPSS100-4-C RES, 0Ω, 0402 R1-R4 Kamaya, Inc. RMC1/16SJPTH DNP L1-L2 N/A N/A

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS141028 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 7 of 9 RFSW6222 Evaluation Board Assembly Drawing

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS141028 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 8 of 9 RFSW6222 Pin Names and Descriptions Pin Name Description

1 GND Ground

2 CB1 Control Voltage

3 VDD Supply Voltage

4 RF2B RF2 Output

5 GND Ground

6 RF2A RF2 Output

7 RF2 RF2 Common Input

8 GND Ground

9 RF1 RF1 Common Input

10 RF1A RF1 Output

11 GND Ground

12 RF1B RF1 Output

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS141028 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 9 of 9 RFSW6222 Package Outline (Dimensions in millimeters) Branding Diagram