RFSW6062

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Features

■ 5MHz to 6000MHz Operation ■ Excellent Insertion Loss and Isolation Performance ■ Low Insertion Loss: 0.53dB at 2GHz ■ High Isolation: 27dB at 2GHz ■ High IP3: >70dBm at 2GHz ■ Compatible with Low Voltage Logic (VHIGH Minimum = 1.3V) ■ No External DC Blocking ■ Capacitors Required on RF Paths if DC is Applied Externally ■ 2000V HBM ESD Rating on All Ports ■ 3V to 5V Operation

Applications

■ Cellular BTS ■ CATV, SATV Applications ■ Test Equipment ■ General Purpose Switch RFSW6062

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 2 of 13 Absolute Maximum Ratings Parameter Rating Unit Control Voltage (VCTL) 3.0 V Supply Voltage (VDD) 6.0 V Maximum CW Input Power for VDD = 3V 32 dBm Max Input Power During Active Switching 24 dBm Storage Temperature Range -40 to +150 °C ESD Rating - Human Body Model (HBM) 2000 V Moisture Sensitivity Level MSL2 \\Note Caution! ESD sensitive device. RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this document revision), halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Recommended Operating Condition Parameter Specification Unit Min Typ Max Operating Temperature Range -40 +85 °C VDD – Switch Supply Voltage 3 5 5.5 V Nominal Operating Parameters Parameter Specification Unit Condition Min Typ Max General Performance Electrical Specifications, TA=25°C, VDD=3V to 5V Operating Frequency Range 5 6000 MHz Insertion Loss2 (RFC to RF1/RF2/ RF3/RF4/RF5/RF6) 0.4 0.45 dB 925MHz 0.53 0.6 dB 1990MHz 0.68 0.78 dB 2650MHz 1.85 dB 5850MHz Isolation (RFC to RF1/RF2/RF3 / RF4RF5/RF6) 31 40 dB 925MHz 22 29 dB 1990MHz 19 25 dB 2650MHz 13.5 dB 5850MHz Isolation (RF1 to RF2/RF3/RF4/ RF5/RF6) 31 40 dB 925MHz 18 27 dB 1990MHz 18 23 dB 2650MHz 13.5 dB 5850MHz Return Loss (On State) 24 dB 5MHz ~ 3GHz Return Loss (On State) 11 dB 3GHz ~ 6GHz 824MHz Second Harmonic -105 -88 dBc Pin = 28dBm

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 13 RFSW6062 Parameter Specification Unit Condition Min Typ Max 824MHz Third Harmonic -89 -86 dBc 2000MHz Second Harmonic -97 -91 dBc 2000MHz Third Harmonic -86 -78 dBc Input IP3 71 dBm 2Ghz, 21dBm per tone, 1MHz spacing Max Operational Input Power 32 dBm Power Supply VDD Supply Current 65 120 µA CTL1, CTL2 – Control Voltage High 1.3 2.7 V CTL1, CTL2 – Control Voltage Low 0 0.45 V Control Current 5 µA Switching Speed, One RF Port to Another 2 5 us 10% to 90% RF Turn On Time 20 us Time for VDD = 0V to part ON and RF = 90% Power-up / Power-down Sequence and Operation Controls Power-up / Power-down Sequence for Power-up and Power-down from Supply that is Connected to VDD Pin Power-up Turn on VDD, then CTL1, CTL2, and CTL3 then (20µs or greater), apply RF signal Power-down Turn off RF signal, then CTL1, CTL2, and CTL3, then turn off VDD Switching Ports Turn off RF signal, then change CTL1, CTL2, and CTL3 state, then (5µs or greater). Turn on RF signal Switch is controlled by CTL1, CTL2, and CTL3 Mode CTL1 CTL2 CTL3 RF1-ANT High Low Low RF2-ANT Low High Low RF3-ANT High High Low RF4-ANT Low Low High RF5-ANT High Low High RF6-ANT Low High High

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 13 RFSW6062 Typical Performance: 5MHz ~ 3000MHz, VDD = 5V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 5 of 13 RFSW6062 Typical Performance: 5MHz ~ 3000MHz, VDD = 5V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 6 of 13 RFSW6062 Evaluation Board Schematic 5MHz to 3000MHz Application Circuit Evaluation Board Bill of Materials (BOM) 5MHz to 3000MHz Application Circuit Description Reference Designator Manufacturer Manufacturer's P/N RFSW6062 Evaluation Board RFSW6062-410 CAP, 100pF, 5%, 50V, C0G, 0402 C1-C3 Murata Electronics GRM1555C1H101JA01D CAP, 10000pF, 10%, 25V, X7R, 0402 C4 Murata Electronics GRM155R71E103KA01D RES, 0Ω, 0402 R1-R3 Kamaya, Inc. RMC1-16SJPTH CONN, SMA, END LNCH, MINI, FLT, 0.068” J1-J2, J4, J6-J9 Emerson Network Power 142-0741-851 CONN, HDR, ST, PLRZD, 5-PIN, 0.100” P1 ITW Pancon MPSS100-5-C High Power SP6T U1 RFMD RFSW6062

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 7 of 13 RFSW6062 Typical Performance: 3000MHz ~ 6000MHz, VDD = 5V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 8 of 13 RFSW6062 Typical Performance: 3000MHz ~ 6000MHz, VDD = 5V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 9 of 13 RFSW6062 Evaluation Board Schematic 3000MHz to 6000MHz Application Circuit Evaluation Board Bill of Materials (BOM) 3000MHz to 6000MHz Application Circuit Description Reference Designator Manufacturer Manufacturer's P/N RFSW6062 Evaluation Board RFSW6062-410 CAP, 100pF, 5%, 50V, C0G, 0402 C1-C3 Murata Electronics GRM1555C1H101JA01D CAP, 10000pF, 10%, 25V, X7R, 0402 C4 Murata Electronics GRM155R71E103KA01D CAP, 0.5pF, +/-0.25pF, 50V, C0G, 0402 C5 Murata Electronics GRM1555C1HR50CA01D RES, 0Ω, 0402 R1-R4 Kamaya, Inc. RMC1-16SJPTH IND, 0.6nH, +/-0.1nH, T/F, 0201 L1 Murata Electronics LQP03TG0N6B02D CONN, SMA, END LNCH, MINI, FLT, 0.068” J1-J2, J4, J6-J9 Emerson Network Power 142-0741-851 CONN, HDR, ST, PLRZD, 5-PIN, 0.100” P1 ITW Pancon MPSS100-5-C High Power SP6T U1 RFMD RFSW6062

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 10 of 13 RFSW6062 Evaluation Board Assembly Drawing

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 11 of 13 RFSW6062 Pin Names and Descriptions Pin Name Description

1 CTL3 Switch logic control 3

2 CTL2 Switch logic control 2

3 CTL1 Switch logic control 1

4 VDD Supply voltage

5 RF6 Single-ended RF port

6 RF5 Single-ended RF port

7 RF4 Single-ended RF port

8 GND Low inductance path to ground

9 ANT Single-ended RF port

10 GND Low inductance path to ground

11 RF1 Single-ended RF port

12 RF2 Single-ended RF port

13 RF3 Single-ended RF port

14 GND Low inductance path to ground

Package Outline Drawing (Dimensions in millimeters)

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 12 of 13 RFSW6062 Stencil, PCB Pattern (Dimensions in millimeters)

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 13 of 13 RFSW6062 Branding Diagram