RFSW6042

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Features

■ 5MHz to 6000MHz Operation ■ Excellent Insertion Loss and Isolation Performance ■ Low Insertion Loss: 0.45dB at 2GHz ■ High Isolation: 34dB at 2GHz ■ High IP3: >70dBm at 2GHz ■ Compatible with Low Voltage Logic (VHIGH Minimum = 1.3V) ■ No External DC Blocking ■ Capacitors Required on RF Paths if DC is Applied Externally ■ 2000V HBM ESD Rating on All Ports ■ 3V to 5V Operation

Applications

■ Cellular BTS ■ CATV, SATV Applications ■ Test Equipment ■ General Purpose Switch RFSW6042

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 2 of 12 Absolute Maximum Ratings Parameter Rating Unit Control Voltage (VCTL) 3.0 V Supply Voltage (VDD) 6.0 V Maximum CW Input Power for VDD = 3V 35 dBm Max Input Power During Active Switching 27 dBm Storage Temperature Range -40 to +150 °C ESD Rating - Human Body Model (HBM) 2000 V Moisture Sensitivity Level MSL2 Caution! ESD sensitive device. RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this document revision), halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Recommended Operating Condition Parameter Specification Unit Min Typ Max Operating Temperature Range -40 +85 °C VDD – Switch Supply Voltage 3 5 5.5 V Nominal Operating Parameters Parameter Specification Unit Condition Min Typ Max General Performance Electrical Specifications, TA=25°C, VDD=5V Operating Frequency Range 5 6000 MHz Insertion Loss (RFC to RF1/RF2/ RF3/RF4) 0.32 0.5 dB 925MHz 0.45 0.6 dB 1990MHz 0.45 dB 2650MHz 1.25 dB 5850MHz Isolation (RFC to RF1/RF2/RF3 / RF4) 36 dB 925MHz 28 dB 1990MHz 25 dB 2650MHz 17 dB 5850MHz Isolation (RF1 to RF2/RF3/RF4) 35 43 dB 925MHz 27 34 dB 1990MHz 30 dB 2650MHz 15 dB 5850MHz Return Loss (On State) -15 dB 5MHz ~ 3GHz Return Loss (On State) -12 dB 3GHz ~ 6GHz 900MHz Second Harmonic -108 -95 dBc Pin = 28dBm

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 12 RFSW6042 Parameter Specification Unit Condition Min Typ Max 900MHz Third Harmonic -103 -90 dBc 2000MHz Second Harmonic -100 -80 dBc Pin = 33dBm 2000MHz Third Harmonic -89 -77 dBc Input IP3 71 dBm 2Ghz, 21dBm per tone, 1MHz spacing Max Operational Input Power 35 dBm Power Supply VDD Supply Current 65 130 µA CTL1, CTL2 – Control Voltage High 1.3 2.7 V CTL1, CTL2 – Control Voltage Low 0 0.45 V Control Current 5 µA Switching Speed, One RF Port to Another 2 5 us 10% to 90% RF Turn On Time 20 us Time for VDD = 0V to part ON and RF = 90% Power-up / Power-down Sequence and Operation Controls Power-up / Power-down Sequence for Power-up and Power-down from Supply that is Connected to VDD Pin Power-up Turn on VDD, then C1 and C2, then (20µs or greater), apply RF signal Power-down Turn off RF signal, then C1 and C2, turn off VDD Switching Ports Turn off RF signal, then change C1 and C2 state, then (5µs or greater). Turn on RF signal Switch is controlled by C1 and C2 Mode C1 C2 RF1-ANT High Low RF2-ANT Low High RF3-ANT High High RF4-ANT Low Low

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 12 RFSW6042 Typical Performance: 5MHz ~ 3000MHz, VDD = 5V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 5 of 12 RFSW6042 Typical Performance: 5MHz ~ 3000MHz, VDD = 5V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 6 of 12 RFSW6042 Evaluation Board Schematic 5MHz to 3000MHz Application Circuit Evaluation Board Bill of Materials (BOM) 5MHz to 3000MHz Application Circuit Description Reference Designator Manufacturer Manufacturer's P/N RFSW6032 Evaluation Board RFSW6032-410 CAP, 100pF, 5%, 50V, C0G, 0402 C1-C2 Murata Electronics GRM1555C1H101JA01D CAP, 10000pF, 10%, 25V, X7R, 0402 C3 Murata Electronics GRM155R71E103KA01D RES, 0Ω, 0402 R1-R3 Kamaya, Inc. RMC1-16SJPTH CONN, SMA, END LNCH, MINI, FLT, 0.068” J1-J5 Emerson Network Power 142-0741-851 CONN, HDR, ST, PLRZD, 5-PIN, 0.100” P1 ITW Pancon MPSS100-5-C High Power SP4T U1 RFMD RFSW6042

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 7 of 12 RFSW6042 Typical Performance: 3000MHz ~ 6000MHz, VDD = 5V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 8 of 12 RFSW6042 Typical Performance: 3000MHz ~ 6000MHz, VDD = 5V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 9 of 12 RFSW6042 Evaluation Board Schematic 3000MHz to 6000MHz Application Circuit Evaluation Board Bill of Materials (BOM) 3000MHz to 6000MHz Application Circuit Description Reference Designator Manufacturer Manufacturer's P/N RFSW6032 Evaluation Board RFSW6032-410 CAP, 100pF, 5%, 50V, C0G, 0402 C1-C2 Murata Electronics GRM1555C1H101JA01D CAP, 10000pF, 10%, 25V, X7R, 0402 C3 Murata Electronics GRM155R71E103KA01D CAP, 0.5pF, +/-0.25pF, 50V, C0G, 0402 C5 Murata Electronics GRM1555C1HR50CA01D RES, 0Ω, 0402 R1-R3 Kamaya, Inc. RMC1-16SJPTH IND, 1nH, +/-0.1nH, T/F, 0201 L1 Murata Electronics LQP03TG1N0B02D CONN, SMA, END LNCH, MINI, FLT, 0.068” J1-J5 Emerson Network Power 142-0741-851 CONN, HDR, ST, PLRZD, 5-PIN, 0.100” P1 ITW Pancon MPSS100-5-C High Power SP4T U1 RFMD RFSW6042

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 10 of 12 RFSW6042 Evaluation Board Assembly Drawing

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 11 of 12 RFSW6042 Pin Names and Descriptions Pin Name Description

1 C2 Switch Logic Control 2

2 C1 Switch Logic Control 1

3 VDD Supply Voltage

4 RF4 Single-ended RF Port

5 GND Low Inductance Path to Ground

6 RF3 Single-ended RF Port

7 ANT Single-ended RF Port

8 GND Low Inductance Path to Ground

9 RF1 Single-ended RF Port

10 GND Low Inductance Path to Ground

11 RF2 Single-ended RF Port

12 GND Low Inductance Path to Ground

Package Outline Drawing (Dimensions in millimeters)

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140821 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 12 of 12 RFSW6042 Stencil, PCB Pattern (Dimensions in millimeters) Branding Diagram