RFSW6024

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Features

■ 300MHz to 6000MHz Operation ■ Symmetric SPDT ■ Non-Reflective (RF1, RF2) ■ Terminated All-off State ■ No Blocking Caps Necessary Unless Voltage on RF Line ■ High Isolation: 60dB at 2GHz ■ High Input IP3: 66dBm ■ 2kV ESD ■ 1.8V Logic Compatible

Applications

■ Cellular, 3G, LTE Infrastructure ■ WiBro, WiMAx. LTE ■ Wireless Backhaul ■ High Performance Communications Systems ■ Test Equipment RFSW6024

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 2 of 13 RFSW6024 Absolute Maximum Ratings Parameter Rating Unit Control Voltage (VCTL, VEN) 6.0 V Supply Voltage (VDD) 6.0 V Maximum CW Input Power See Table Storage Temperature Range -40 to +150 °C ESD Rating - Human Body Model (HBM) 2000 V Moisture Sensitivity Level MSL2 Caution! ESD sensitive device. RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this document revision), halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Recommended Operating Condition Parameter Specification Unit Min Typ Max Operating Temperature Range -40 +105 °C Operating Junction Temperature 125 °C Supply Voltage 2.5 3 5.5 V Nominal Operating Parameters Parameter Specification Unit Condition Min Typ Max General Performance1 & 2 Electrical Specifications, TA = 25°C, VCRTL = 0/+5 VDC, VDD = +5VDC, 50Ω system. Operating Frequency Range 300 6000 MHz Insertion Loss (RFC to RF1/RF2) 0.55 dB 0.3GHz 0.6 dB 1GHz 0.75 1 dB 2GHz 0.9 dB 3GHz 0.9 dB 4GHz 1.1 dB 5GHz Isolation (RFC to RF1/RF2) 75 dB 0.3GHz 63 dB 1GHz 60 dB 2GHz 60 dB 3GHz 60 dB 4GHz 48 dB 5GHz

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 13 RFSW6024 Parameter Specification Unit Condition Min Typ Max General Performance - Continued Electrical Specifications, TA = 25°C, VCRTL = 0/+5 VDC, VDD = +5VDC, 50Ω system. Isolation (RF1 to RF2) 80 dB 0.3GHz 70 dB 1GHz 60 dB 2GHz 53 dB 3GHz 48 dB 4GHz 49 dB 5GHz Return Loss (RF1/RF2 On-state) 28 dB 0.3GHz 27 dB 1GHz 20 dB 2GHz 20 dB 3GHz 22 dB 4GHz 17 dB 5GHz Return Loss (RF1/RF2 Off-state) 37 dB 0.3GHz 36 dB 1GHz 30 dB 2GHz 27 dB 3GHz 23 dB 4GHz 20 dB 5GHz Input IP3 65 dBm 1GHz + 12dBm input power per tone, 1MHz tone spacing 65 dBm 2GHz + 12dBm input power per tone, 1MHz tone spacing Input 0.1dB Compression Point 36 dBm 1GHz Input 1dB Compression Point 36 dBm Settling Time 2 µs 50% Control to internal negative voltage at 90% final value Start-up Time 10 µs 90% VDD to internal negative voltage at 90% final value Switching Speed 250 ns 50% control to 10/90% RF Power Supply Supply Current (IDD) 140 170 µA VDD = 5.0V Control Current (ICTL, IEN) 0.5 5 µA VCTL = 5.0V Low Control Voltage (VCTL) 0 0.63 V 1.8V Logic compatible High Control Voltage (VCTL) 1.1 VDD V Notes: 1. S-parameters have the PCB de-embedded 2. RF ports need to be at 0V DC. If > 0.5V is present on RF lines, blocking caps are required.

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 13 RFSW6024 Maximum Operating Power at 85°C, CW Input VEN Power Theta-J (°C/W) RFC Low 33dBm1 972 RFC High (all off) 31.3dBm N/A RF1/2 Low or High 26dBm 100 RF1/2 (Simultaneous) Low or High 27.8dBm3 65 Notes: 1. Assuming load VSWR <3:1, for high VSWR loads this value reduces to 30.5dBm 2. Applies to resistive loss from insertion loss not including mismatch loss 3. Total power in both loads being driving simultaneously Truth Tables Control Input Signal Path State VCTL VEN RFC-RF1 RFC-RF2 0 0 Off On 1 0 On Off 0 1 Off Off 1 1 Off Off “0” = 0V to 0.63V “1” = 1.1V to VDD VDD = 2.5 to 5.5V, must be applied for all valid states

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 5 of 13 RFSW6024 Typical Performance: T = 25°C, VDD = 3V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 6 of 13 RFSW6024 Typical Performance: T = 25°C, VDD = 3V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 7 of 13 RFSW6024 Typical Performance: T = 25°C, VDD = 3V unless otherwise noted

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 8 of 13 RFSW6024 Evaluation Board Schematic Note: VSD and VNEG are not used. Evaluation Board Bill of Materials (BOM) Description Reference Designator Manufacturer Manufacturer's P/N RFSW6024 Evaluation Board Viasystems Sales, Inc. (Toronto) RFSW6224-410(A) CAP, 100pF, 5%, 50V, C0G, 0402 (optional) C2-C4 Taiyo Yuden (USA), Inc. RM UMK105 CG101JV-F 0Ω, 50mΩ MAX, 0402 LEAD FREE R2-R3, R5-R7 KOA Speer Electronics, Inc. RK73Z1ETTP Do Not Install R1, R4 CONN, HDR, ST, PLRZD, 6-PIN, 0.100” P1 AMP 640454-6 CONN, SMA EL MINI FLT 0.068” SPE- 000303 J1-J5 Aliner Industries, Inc. 20-001CF-T RFSW6024SB U1 RFMD RFSW6024

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 9 of 13 RFSW6024 Evaluation Board Assembly Drawing

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 10 of 13 RFSW6024 Application Schematic

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 11 of 13 RFSW6024 Pin Names and Descriptions Pin Name Description

1 VDD Supply Voltage

2 VCTL Logic Control Input

3 RFC RF Common Port

4 NC No Internal Connection

5 VEN Logic input for putting switch in “all-off” state. Logic high for “all-off” state.

6 GND or NC Ground or No Connection

7 GND or NC Ground or No Connection

8 NC No Internal Connection

9 RF1 RF Port 1

10 GND or NC Ground or No Connection

11 GND or NC Ground or No Connection

12 RF2 RF Port 2

13 NC No Internal Connection

14 GND or NC Ground or No Connection

15 GND or NC Ground or No Connection

16 NC No Internal Connection

EPAD GND RF and DC Ground: Must be soldered to EVB ground plane over a bed of vias Note: RFMD recommends that the NC pins be grounded on the EVB to maximize isolation.

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 12 of 13 RFSW6024 Package Outline (Dimensions in millimeters)

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150202 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 13 of 13 RFSW6024 Branding Diagram