DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
Features
5MHz to 6000MHz Operation 50 or 75 Applications Low Insertion Loss: 0.30dB at 1980MHz High Isolation: 37dB at 2GHz High IP3: >75dBm at 2GHz Compatible with Low Voltage Logic (V HIGH Minimum = 1.3V) No External DC Blocking Capacitors Required on RF Paths Unless DC is Applied Externally 2000V HBM ESD Rating on All Ports CTB/CSO: >100dBc (41dBmV/ch., 137 Channels)
Applications
Cellular BTS CATV, SATV Applications Post PA Switching General Purpose Switching Package: QFN, 12-Pin, 2mm x 2mm x 0.55mm RFSW1012 Broadband SPDT Switch RFSW1012SQ 25-Piece sample bag RFSW1012SR 7" Sample reel with 100 pieces RFSW1012TR7 7" Reel with 2500 pieces RFSW1012PCK-411 50 PCBA with 5-piece sample bag RFSW1012PCK-410 75 PCBA with 5-piece sample bag
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Absolute Maximum Ratings Parameter Rating Unit Maximum VDD 6.0 V Maximum EN 3.0 V Maximum CTRL 3.0 V Hot-Switching Max Input Power (50 load) 20 dBm Max Input Power 31dBm: 5MHz to 25MHz, 50 load 34dBm: 25MHz to 500MHz, 50 load 37dBm: >500MHz, 50 load 36dBm: >500MHz, 6:1 VSWR dBm Operating Temperature CASE) -40 to +85 °C Storage Temperature -40 to +150 °C ESD Rating (HBM) Class 2 Moisture Sensitivity Level MSL-2 Parameter Specification Unit ConditionMin. Typ. Max. 50 Performance Using SW1012-411(A) EVB Nominal Test Conditions Unless Otherwise Stated: VDD = 3V, T = 25°C, All RF ports terminated in 50 Operational Frequency Range 5 6000 MHz Insertion Loss (RFC to RF1/RF2) 0.25 0.40 dB 915MHz 0.30 0.45 dB 1980MHz 0.40 dB 2650MHz 0.75 dB 5850MHz Isolation (RFC to RF1/RF2) 38 45 dB 915MHz 33 37 dB 1980MHz 29 33 dB 2650MHz 21 dB 5850MHz Isolation (RF1 to RF2) 37 42 dB 915MHz 31 35 dB 1980MHz 28 32 dB 2650MHz 21 dB 5850MHz Return Loss (On-State) >15 dB 5MHz to 6GHz Input IP3 75 dBm 2.2GHz, 24dBm per tone, 1MHz spacing Input IP2 129 dBm Tone 1: 836.5MHz at +26dBm; Tone 2: 1718MHz at -20dBm; Rx Freq: 881.5MHz 129 dBm Tone 1: 1880MHz at +26dBm; Tone 2: 3840MHz at -20dBm; Rx Freq: 1960MHz Spurious Output <-105 dBm Freq >5MHz, all ports terminated, no RF Inputs <-100 dBm Freq <5MHz, all ports terminated, no RF Inputs 900MHz Second Harmonic -95 -75 dBc P IN = 35dBm 900MHz Third Harmonic -90 -75 dBc 1800MHz Second Harmonic -95 -75 dBc P IN = 33dBm 1800MHz Third Harmonic -90 -75 dBc Max Operational Input Power 30 dBm 5MHz to 25MHz, 50 load 33 dBm 25MHz to 500MHz, 50 load 36 dBm >500MHz, 50 load
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. 75 Performance Using SW1012-410(A) EVB Nominal Test Conditions Unless Otherwise Stated: VDD = 3V, T = 25°C, All RF ports terminated in 75 Operational Frequency Range 5 2500 MHz Insertion Loss (RFC to RF1/RF2) 0.15 dB 5MHz 0.20 dB 200MHz 0.30 0.45 dB 915MHz 0.35 0.50 dB 1980MHz 0.40 2200MHz Isolation (RFC to RF1/RF2) 70 dB 5MHz 50 dB 200MHz 36 dB 915MHz 28 dB 1980MHz 26 dB 2200MHz Isolation (RF1 to RF2) >70 dB 5MHz >70 dB 200MHz 48 dB 915MHz 34 dB 1980MHz 32 dB 2200MHz Return Loss (On-State) >15 dB Freq <1200MHz >13 dB 1200MHz < Freq < 2500MHz CSO >100 dBc 41dBmV/ch, 137 channels) CTB >100 dBc XMOD >90 dBc Max Operational Input Power 30 dBm 5MHz to 25MHz, 75 load 33 dBm 25MHz to 500MHz, 75 load 36 dBm >500MHz, 75 load Power Supply Device Voltage, VDD 2.7 3 4.6 V Leakage Current, IDD 100 200 AE N = H i g h 14 20 AE N = L o w Control Voltage (EN, CTRL) 1.3 1.8 2.7 V 00 . 4 5 V Control Current 2.5 5 A CTRL = High, EN = High 13 A CTRL = Low, EN = High Switching Speed (TON, TOFF)2 5 s 50% Control to 10/90% RF Parameter Specification Unit ConditionMin. Typ. Max.
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Power Up / Power Down and Operational Controls
Description
Scenario 1 Sequence for power up and power down from the phone battery or supply that is connected to RFSW1012 VBATT Pin. Power Up Turn on VBATT (supply), then EN, the CTRL. Then (20 S or greater), apply RF signal Power Down Turn off RF signal, then CTRL, then EN, turn off VBATT (supply) Scenario 2 Sequence for going in and out of a shutdown mode, keeping the VBATT or supply on, but disabling / enabling the RFSW1012 by the EN pin Power Up Turn on EN (enable), then CTRL, then (5 S or greater), turn on RF Signal Power Down Turn off RF signal, then CTRL, then EN (disable) Scenario 3 When changing switch positions between RF1 and RF2, no RF signal should be applied to any RF port while the CTRL is changing states Switching Ports Turn on RF signal, then change CTRL state, then (5 S or greater), turn off RF signal
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Typical Performance: 50 Evaluation Board -1.8 -1.6 -1.4 -1.2 -0.8 -0.6 -0.4 -0.2 012345 6 Insertion Loss (dB) Frequency (GHz) Insertion Loss versus Frequency RFC-RF1 RFC-RF2 -1.8 -1.6 -1.4 -1.2 -0.8 -0.6 -0.4 -0.2 012345 Insertion Loss (dB) Frequency (GHz) Insertion Loss over Temperature (RFC-RF1) 25°C -40°C 85°C -30 -25 -20 -15 -10 012345 Return Loss (dB) Frequency (GHz) Return Loss versus Frequency (On-State) RFC RF1 RF2 -30 -25 -20 -15 -10 0123456 Return Loss (dB) Frequency (GHz) Return Loss over Temperature (RFC) 25°C -40°C 85°C -70 -60 -50 -40 -30 -20 -10 012345 6 Isolation (dB) Frequency (GHz) Isolation versus Frequency RFC-RF1 RFC-RF2 RF1-RF2 -70 -60 -50 -40 -30 -20 -10 012345 Isolation (dB) Frequency (GHz) Isolation over Temperature (RFC-RF1) 25°C -40°C 85°C
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Typical Performance: 50 Evaluation Board 2.5 IP3 (dBm) Frequency (GHz) IP3 versus Frequency (24dBm Tones, 1MHz Spacing) RF1 RF2IP3 data is limited by the dynamic range of the test system. 2.5 IP3 (dBm) Frequency (GHz) IP3 over Temperature (24dBm Tones, 1MHz Spacing) 25°C -40°C 85°C IP3 data is limited by the dynamic range of the test system. -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 15 18 21 24 27 30 33 36 39 42 Insertin Loss (dBm) Input Power (dBm) Insertion Loss versus Frequency and Power, 25°C 5MHz 25MHz 500MHz 880MHz 2200MHz 2500MHz -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 15 18 21 24 27 30 33 36 39 42 45 Insertion Loss (dBm) Input Power (dBm) Insertion Loss versus Power over Temperature, 2500MHz 25°C -40°C 85°C -30 -27 -24 -21 -18 -15 -12 -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 0123456 Return Loss (dB) Insertion Loss (dB) Frequency (GHz) EVB THRU Performance, 25°C IL RL This THRU insertion loss has been deembedded from the SW1012 plots and tabular data.
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Typical Performance: 75 Evaluation Board -2.0 -1.8 -1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 2.5 Insertion Loss (dB) Frequency (GHz) Insertion Loss versus Frequency RFC-RF1 RFC-RF2 -2.0 -1.8 -1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 2.5 Insertion Loss (dB) Frequency (GHz) Insertion Loss over Temperature (RFC-RF1) 25°C -40°C 85°C -30 -25 -20 -15 -10 2.5 Return Loss (dB) Frequency (GHz) Return Loss versus Frequency (On State) RFC RF1 RF2 -30 -25 -20 -15 -10 Return Loss (dB) Frequency (GHz) Return Loss over Temperature (RFC) 25°C -40°C 85°C -70 -60 -50 -40 -30 -20 -10 2.5 Isolation (dB) Frequency (GHz) Isolation versus Frequency RFC-RF1 RFC-RF2 RF1-RF2 -70 -60 -50 -40 -30 -20 -10 2.5 Isolation (dB) Frequency (GHz) Isolation versus Temperature (RFC-RF1) 25°C 85°C -40°C
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Typical Performance: 75 Evaluation Board 100 105 110 115 1.0 CTB (dBc) Frequency (GHz) CTB versus Temperature (3V, 137 Ch., 41dBmV) 25°C -40°C 85°C 100 105 110 115 CSO Upper (dBc) Frequency (GHz) CSO Upper versus Frequency (3V, 137 Ch., 41dBmV) 25°C -40°C 85°C 100 105 110 115 CSO Lower (dBc) Frequency (GHz) CSO Lower versus Frequency (3V, 137 Ch., 41dBmV) 25°C -40°C 85°C -30 -27 -24 -21 -18 -15 -12 -2.0 -1.8 -1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -0.4 -0.2 0.0 Return Loss (dB) Insertion Loss (dB) Frequency (GHz) EVB THRU Performance, 25°C IL RL This THRU insertion loss has been deembedded from the SW1012 plots and tabular data.
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Evaluation Board Schematic Evaluation Board Bill of Materials (BOM) Description Reference Designator Manufacturer Manufacturer’s P/N 50Ω PCB, SW1012-411 SW1012-411(A) CAP, 10000pF, 10%, 25V, X7R, 0402 C1 Murata Electronics GRM155R71E103KA01D CAP, 100pF, 5%, 50V, C0G, 0402 C2-C3 Taiyo Yuden (USA), Inc. RM UMK105CG101JV-F CONN, SMA, END LNCH, MINI, FLT, 0.068" J1-J3 Emerson Network Power 142-0741-851 CONN, HDR, ST, PLRZD, 5-PIN, 0.100" P1 ITW Pancon MPSS100-5-C SPDT MMIC Switch U1 RFMD For 75Ω applications use the following PCB and RF connector: 75Ω PCB, SW1012-410 SW1012-410(A) CONN, F, FEM EDGE MOUNT, 75Ω, 0.068" J1- J3 Millimeter Wave Technologies MW-846-C-DD-75
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. 50Evaluation Board Assembly Drawing 75Evaluation Board Assembly Drawing
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Control Logic for Valid Operational States Pin Out State V DD CTRL EN RF Path 12 . 7 V t o 4 . 6 V VHIGH VHIGH ANT-RF2 22 . 7 V t o 4 . 6 V VLOW VHIGH ANT-RF1 Shutdown 2.7V to 4.6V Don’t Care VLOW Shutdown Pin Names and Descriptions Pin Name Description 1G N D No-connect internal, recommend GND at the EVB level. 2R F C Single-ended RF port. 3G N D No-connect internal, recommend GND at the EVB level. 4G N D Ground. 5R F 1 Single-ended RF port. 6G N D Ground. 7C T R L Switch logic control input. 8E N Shutdown logic control input. 9V D D Supply voltage. 10 GND Ground. 11 RF2 Single-ended RF port. 12 GND Ground. EPAD GND Ground. Must be soldered to EVB GND over one or more vias.
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Package Drawing (Dimensions in millimeters)
support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Branding Diagram (Dimensions in millimeters)