DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 19

Technical content

Features

■ 1400MHz to 2700MHz Operation ■ P1dB = 34.9dBm at 2140MHz ■ ACP = -52dBc at POUT = 25dBm, 2140MHz ■ High Linearity OIP3 = 52.3dBm at 2140MHz ■ DC Power 5V, 800mA

Applications

■ GaAs Pre-driver for Base Station Amplifiers ■ Small Cell Output Stage ■ PA Stage for Commercial Wireless Infrastructure RFPA2545

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 2 of 19 RFPA2545 Absolute Maximum Ratings Parameter Rating Unit Device Voltage (VCC and VBIAS) 7.0 V Device Current 2500 mA VREG Current 6.0 mA VREG Device Voltage 3.8 V CW Input Power, 50Ω Load, 2140MHz Band 39 dBm CW Input Power, 50Ω Load, 2640MHz Band 41 dBm Modulated (WCDMA) Input Power, 6:1 Output VSWR, 2140MHz Band 27 dBm Modulated (WCDMA) Input Power, 6:1 Output VSWR, 2640MHz Band 34 dBm Storage Temperature Range -40 to +150 °C ESD Rating – Human Body Model (HBM) 500 V ESD Rating – Charge Device Model (CDM) 1000 V Moisture Sensitivity Level MSL1 Notes: 1. The maximum ratings must all be met simultaneously 2. PDISS = PDC + PRFIN – PROUT 3. TJ = TL + PDISS * RTH Caution! ESD sensitive device. RFMD Green: RoHS status based on EU Directive 2011/65/EU (at time of this document revision), halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Recommended Operating Condition Parameter Specification Unit Min Typ Max Operating Temperature Range -40 25 +105 °C Operating Junction Temperature 160 °C Operating Voltage VCC 4.75 5 5.25 V Nominal Operating Parameters Parameter Specification Unit Condition Min Typ Max 2110MHz to 2170MHz VCC = VBIAS = VREG = 5V, Temp = 25°C, Optimized for ACPR at Rated Power Frequency 2140 MHz Gain 12.3 dB Output IP3 52.3 dBm POUT 18dBm per tone, 1MHz spacing ACPR -52 dBc RF Output power = 25dBm, WCDMA 3GPP 3.5, test model 1, 64 DPCH P1dB 34.9 dBm Input Return Loss -20 dB Small signal S11 Output Return Loss -13.7 dB Small signal S22

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 19 RFPA2545 Parameter Specification Unit Condition Min Typ Max 2110MHz to 2170MHz – Continued VCC = VBIAS = VREG = 5V, Temp = 25°C, Optimized for ACPR at Rated Power Noise Figure 5.7 dB Input Power (PIN) 19 dBm Max recommended continuous PIN, VCC = VBIAS = 5V, Load VSWR = 2:1 2590MHz to 2690MHz VCC = VBIAS = VREG = 5V, Temp = 25°C, Optimized for ACPR at Rated Power Frequency 2640 MHz Gain 11.8 dB Output IP3 48.1 dBm POUT 18dBm per tone, 1MHz spacing ACPR -51.9 dBc RF Output power = 25dBm, WCDMA 3GPP 3.5, test model 1, 64 DPCH P1dB 35.6 dBm Input Return Loss -21 dB Small signal S11 Output Return Loss -25 dB Small signal S22 Noise Figure 5.9 dB Input Power (PIN) 20 dBm Max recommended continuous PIN, VCC = VBIAS = 5V, Load VSWR = 2:1 Power Supply Operating Current (Quiescent) 800 mA At VCC = VBIAS = 5V, VREG = 5V Thermal Resistance 8 °C/W Junction-to-back side of IC, at VCC = VBIAS = VREG = 5V, reference Temp = 85°C, No RF Shutdown Leakage Current 10 µA At VCC = VBIAS = 5V, VREG = 5V

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 19 RFPA2545 Typical Application Schematic 2110MHz to 2170MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 5 of 19 RFPA2545 Typical Performance: VCC = VBIAS = VREG = 5V 2110MHz to 2170MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 6 of 19 RFPA2545 Typical Performance: VCC = VBIAS = VREG = 5V 2110MHz to 2170MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 7 of 19 RFPA2545 Typical Performance: VCC = VBIAS = VREG = 5V 2110MHz to 2170MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 8 of 19 RFPA2545 Evaluation Board Schematic 2110MHz to 2170MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 9 of 19 RFPA2545 Evaluation Board Bill of Materials (BOM) 2110MHz to 2170MHz Application Circuit Description Reference Designator Manufacturer Manufacturer's P/N RFPA2545 Evaluation Board PA2545-411(A) RFPA2545 U1 RFMD RFPA2545 CAP, 4.7pF, ±0.1pF, 50V, HI-Q, 0402 C5 Murata Electronics GJM1555C1H4R7BB01D CAP, 9.1pF, +/-0.25pF, 50V, HI-Q, 0402 C6 Murata Electronics GJM1555C1H9R1CB01D CAP, 1µF, 10%, 16V, X7R, 0805 C7 Murata Electronics GRM21BR71C105KA01K CAP, 1000pF, 10%, 50V, X7R, 0402 C8, C14 Murata Electronics GRM155R71H102KA01D CAP, 8.2pF, +/-0.5pF, 50V, C0G, 0402 C9, C15 Taiyo Yuden (USA), Inc. RM UMK105 CG8R2DV-F CAP, 10µF, 10%, 25V, X7R, 1206 C12 Taiyo Yuden (USA), Inc. TMK316AB7106KL-T CAP, 4.3pF, ±0.1pF, 50V, HI-Q, 0402 C18 Murata Electronics GJM1555C1H4R3BB01D CAP, 100pF, 5%, 50V, C0G, 0402 C22 Murata Electronics GRM1555C1H101JA01D IND, 24nH, 5%, W/W, 0603 L1 Coilcraft, Inc. 0603HC-24NXJLW RES, 1K, 5%, 1/16W, 0402 R1 Kamaya, Inc. RMC1/16S-102JTH RES, 0Ω, 0402 KAMAYA R2 Kamaya, Inc. RMC1/16SJPTH CONN, SMA, END LNCH, RND PIN, 0.039" J1-J2 GIGALANE CO., LTD. PSF-S01-002 CONN, HDR, ST, PLRZD, 5-PIN, 0.100" P1 ITW Pancon MPSS100-5-C HEATSINK BLOCK, 1.16 SQ I Robert S. Wells EEF-102059 SCREW, 2-56 x 3/16", SOCKET HEAD S1-S5 McMaster-Carr Supply Co. 92196A076 DNP C1-C4, C10-C11, C13, C16-C17, C19-C21

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 10 of 19 RFPA2545 Evaluation Board Assembly Drawing 2110MHz to 2170MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 11 of 19 RFPA2545 Typical Application Schematic 2590MHz to 2690MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 12 of 19 RFPA2545 Typical Performance: VCC = VBIAS = VREG = 5V 2590MHz to 2690MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 13 of 19 RFPA2545 Typical Performance: VCC = VBIAS = VREG = 5V 2590MHz to 2690MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 14 of 19 RFPA2545 Typical Performance: VCC = VBIAS = VREG = 5V 2590MHz to 2690MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 15 of 19 RFPA2545 Evaluation Board Schematic 2590MHz to 2690MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 16 of 19 RFPA2545 Evaluation Board Bill of Materials (BOM) 2590MHz to 2690MHz Application Circuit Description Reference Designator Manufacturer Manufacturer's P/N RFPA2545 Evaluation Board RFPA2545-412(A) RFPA2545 U1 RFMD RFPA2545 CAP, 3.3pF, ±0.1pF, 50V, HI-Q, 0402 C5 Murata Electronics GJM1555C1H3R3BB01D CAP, 4.3pF, ±0.1pF, 50V, HI-Q, 0402 C6 Murata Electronics GJM1555C1H4R3BB01D CAP, 1µF, 10%, 16V, X7R, 0805 C7 Murata Electronics GRM21BR71C105KA01K CAP, 1000pF, 10%, 50V, X7R, 0402 C8, C14 Murata Electronics GRM155R71H102KA01D CAP, 15pF, 5%, 50V, C0G, 0402 C9, C15 Murata Electronics GRM1555C1H150JA01D CAP, 10µF, 10%, 25V, X7R, 1206 C12 Taiyo Yuden (USA), Inc. TMK316AB7106KL-T CAP, 3.6pF, ±0.1pF, 50V, HI-Q, 0402 C16 Murata Electronics GJM1555C1H3R6BB01D CAP, 10pF, 1%, 50V, HI-Q, 0402 C22 Murata Electronics GJM1555C1H100FB01D CAP, 100pF, 5%, 50V, C0G, 0402 C23 Murata Electronics GRM1555C1H101JA01D IND, 3.9nH, 5%, WW, 0603 L1 Coilcraft, Inc. 0603HC-3N9XJLW IND, 1.2nH, 5%, W/W, 0402 L2 Coilcraft, Inc. 0402CS-1N2XJLW RES, 1K, 5%, 1/16W, 0402 R1 Kamaya, Inc. RMC1/16S-102JTH RES, 0Ω, 0402 R2 Kamaya, Inc. RMC1/16SJPTH CONN, SMA, END LNCH, RND PIN, 0.039" J1-J2 GIGALANE CO., LTD. PSF-S01-002 CONN, HDR, ST, PLRZD, 5-PIN, 0.100" P1 ITW Pancon MPSS100-5-C HEATSINK BLOCK, 1.16 SQ I Robert S. Wells EEF-102059 SCREW, 2-56 x 3/16", SOCKET HEAD S1-S5 McMaster-Carr Supply Co. 92196A076 DNP C1-C4, C10-C11, C13, C17-C21

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 17 of 19 RFPA2545 Evaluation Board Assembly Drawing 2590MHz to 2690MHz Application Circuit

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 18 of 19 RFPA2545 Pin Names and Descriptions Pin Name Description

1 VBIAS VCC Supply to Active Bias Circuit

2 NC No Internal Connection

3 RFIN RF Input; Must be DC blocked

4 RFIN RF Input; Must be DC blocked

5 RFIN RF Input; Must be DC blocked

6 RFIN RF Input; Must be DC blocked

7 RFOUT/VCC RF Output and Collector Supply

8 RFOUT/VCC RF Output and Collector Supply

9 RFOUT/VCC RF Output and Collector Supply

10 RFOUT/VCC RF Output and Collector Supply

11 NC No Internal Connection

12 VREG Current Adjust / Shutdown Control

DC and RF Ground; Must be soldered to EVB ground plane over a bed of vias for thermal and RF performance. Solder/epoxy voids under the EPAD will result in excessive junction temperatures causing permanent damage. Package Outline (Dimensions in millimeters)

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS150130 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 19 of 19 RFPA2545 Branding Diagram