DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

■ Superior Return Loss Performance ■ Extremely Low Distortion ■ Optimal Reliability ■ Very Low EINC ■ 30.0dB A/W Min. at 1200MHz ■ 250mA Max. at 24V+

Applications

■ 45MHz to 1200MHz CATV Amplifier Systems

Ordering Information

RFOS6012 Box with 3 Pieces RFOS6013 Box with 3 Pieces See Page 3 Absolute Maximum Ratings Parameter Rating Unit Optical Input Power 5 mW DC Supply Over-Voltage (5 minutes) 30 V ESD Sensitivity, Acc. MIL-Standard 1686C (human body model; R = 1.5kΩ, C = 100pF) 500 V Storage Temperature -40 to +85 °C Operating Mounting Base Temperature -20 to +85 °C Minimum Fiber Bending Radius 35 mm Maximum Tensile Strength 5 N Caution! ESD sensitive device. RoHS (Restriction of Hazardous Substances): Compliant per EU Directive 2011/65/EU. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. OPTICAL INPUT OUTPUT BIAS MONITOR RFOS601X

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140306 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. Nominal Operating Parameters Parameter Specification Unit Condition Min Typ Max General Performance V+ = 24V; TMB = 30°C; ZL = 75Ω Responsivity 2400 2650 V/W f = 1200MHz, λ = 1310nm 30.0 31.0 dB A/W Slope[1] 0 2 dB f = 45MHz to 1200MHz Flatness of O/E Response <0.7 1.0 dB f = 45MHz to 1200MHz (peak to valley) Optical Return Loss 45 dB Output Return Loss 15 17 dB f = 45MHz to 1200MHz Equivalent Input Noise 4.2 4.6 pA/ √Hz f = 50MHz to 1200MHz Spectral Sensitivity

0.90 A/W λ = (1310± 20)nm

0.90 A/W λ = (1550± 20)nm

Optical Wavelength 1290 1600 nm Total DC Current 245 250 mA module pin 4 and pin 5 connected to V+ PIN Diode Bias Current 1.5 5 mA Distortion Data V+ = 24V; TMB = 30°C; ZL = 75Ω Second Order Distortion[2] -75 -71 dBc fm = 54MHz; f1 = 187.25MHz; f2 = 133.25MHz -75 -70 dBc fm = 446.5MHz; f1 = 97.25MHz; f2 = 349.25MHz -70 -65 dBc fm = 548.5MHz; f1 = 109.25MHz; f2 = 439.25MHz -68 -63 dBc fm = 746.5MHz; f1 = 133.25MHz; f2 = 613.25MHz -68 -63 dBc fm = 854.5MHz; f1 = 133.25MHz; f2 = 721.25MHz -66 -63 dBc fm = 986.5MHz; f1 = 133.25MHz; f2 = 853.25MHz Third Order Distortion[3] -78 -75 dBc fm = 55.25MHz; f1 = 109.25MHz; f2 = 133.25MHz; f3 = 187.25MHz -78 -75 dBc fm = 445.25MHz; f1 = 193.25MHz; f2 = 349.25MHz; f3 = 97.25MHz -78 -75 dBc fm = 547.25MHz; f1 = 217.25MHz; f2 = 439.2MHz; f3 = 109.25MHz -78 -75 dBc fm = 745.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 613.25MHz -78 -75 dBc fm = 853.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 721.25MHz -78 -75 dBc fm = 985.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 853.25MHz 1. The slope is defined as the difference between the O/E response at the start frequency (45MHz) and the O/E response at the stop frequency (1200MHz). 2. Two laser test; each laser with 40% OMI; Popt = 1mW (total). 3. Three laser test; each laser with 60% OMI; Popt = 1mW (total).

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140306 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 4 RFOS601X Cable Lengths and Connector Types Type Dimension A, See Figure 1 Optical Connector Type Inches Tolerance mm Tolerance RFOS6012 33.4 -4 to +0.5 848 -102 to +13 FC/APC RFOS6013 33.4 -4 to +0.5 848 -102 to +13 SC/APC Figure 1 – Fiber length details

RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 DS140306 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 4 RFOS601X Package Drawing (Dimensions in millimeters)