DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

 Low Cost  Broadband Gain  Internally Matched  Internal Active Bias  No Dropping Resistor  Single Supply 5V Operation  HBM ESD Level >1000V

Applications

 PA Driver Amplifier  LO Buffer Amplifier  Cellular, PCS, GSM, UMTS, LTE, TD-SCDMA  Wideband Instrumentation  Wireless Data, Satellite Terminals Prelim DS111213 Package: SOT-89 RFGA2044 InGaP HBT MMIC Ampli- fier 50MHz to 3000MHz RFGA2044SR 7” Sample reel with 100 pieces RFGA2044SQ Sample bag with 25 pieces RFGA2044TR7 7” Reel with 750 pieces RFGA2044TR13 13” Reel with 2500 pieces RFGA2044PCK-410 500MHz to 3000MHz PCBA with 5-piece sample bag

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Absolute Maximum Ratings Parameter Rating Unit Supply Voltage (VCC)6 . 0 V Device Current (ICC)1 3 0 m A CW Input Power, 2:1 Output VSWR 20 dBm CW Input Power, 10:1 Output VSWR 15 dBm Operating Junction Temperature (TJ)1 5 0 ° C Operating Temperature Range (TL)- 4 0 t o + 8 5 ° C Storage Temperature -55 to +150 °C ESD Rating - Human Body Model 1C (1000V) Moisture Sensitivity Level MSL-2 NOTES: 1. The maximum rating must all be met simultaneously. 2. P DISS = PDC + PRFIN - PRFOUT. 3. TJ = TL + PDISS * RTH. Parameter Specification Unit ConditionMin. Typ. Max. Linear Operation Typical performance at 25°C using the standard sample EVB with R2 = open. This design is for linear operation only. Input Power (P IN) 6.0 dBm Max recommended continuous input power, V CC < 5.0V, Load VSWR < 2:1 Gain 15.3 dB 850MHz 13.5 15.1 16.5 dB 2140MHz 15.1 dB 2650MHz OIP3 35.5 dBm 850MHz (0dBm/Tone, 1MHz spacing) 28 30.5 dBm 2140MHz (0dBm/Tone, 1MHz spacing) 29.0 dBm 2650MHz (0dBm/Tone, 1MHz spacing) P1dB 19.0 dBm 850MHz 17.3 18.8 dBm 2140MHz 18.2 dBm 2650MHz Input Return Loss 15 dB 2140MHz Output Return Loss 14 dB Isolation 19 dB Noise Figure 4.3 dB Operating Current (Quiescent) 68 78 mA At V CC = 5.0V Operating Voltage (VCC) 5.0 5.25 V Max recommended voltage for continuous operation Thermal Resistance (RTH) 135 °C/W At quiescent current, no RF, V CC = 5.0V Saturated Operation Typical performance at 25°C using the input pull-down resistor (R2 = 5.1 K) to lower quiescent current. See schematic following the "saturated operation plots". Input Power (PIN) 14 dBm Max. recommen ded continuous input power VCC < 5.0V, Load VSWR < 2:1, R2 = 5.1 K Saturated Output Power 19.4 dBm 850MHz 19.8 dBm 2140MHz 19.8 dBm 2650MHz Operating Current 90 mA Max recommended current for continuous operation Operating Voltage 5.0 5.25 V Max recommended voltage for continuous operation Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical perfor- mance or functional operation of the device under Absolute Maximum Rating condi- tions is not implied. The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice. RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder.

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Typical Performance: 500MHz to 3000MHz Application Circuit (Linear Operation, R2 = 0pen) -30 -25 -20 -15 -10 3.0 Input Return Loss (dB) Frequency (GHz) Input Return Loss versus Frequency -40°C 25°C 85°C 3.0 Gain (dB) Frequency (GHz) Gain versus Frequency -40°C 25°C 85°C -40 -35 -30 -25 -20 -15 -10 3.0 Isolation (dB) Frequency (GHz) Isolation versus Frequency -40°C 25°C 85°C -30 -25 -20 -15 -10 3.0 Output Return Loss (dB) Frequency (GHz) Output Return Loss versus Frequency -40°C 25°C 85°C Output IP3 (dBm) Frequency (GHz) Output IP3 versus Frequency 25°C -40°C 85°C P1dB (dBm) Frequency (GHz) P1dB versus Frequency 25°C -40°C 85°C

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Typical Performance: 500MHz to 3000MHz Application Circuit (Linear Operation, R2 = 0pen) 3.0 Noise Figure (dB) Frequency (GHz) Noise Figure versus Frequency 25°C 85°C 100 120 6.0 Current (mA) Voltage (V) Current versus Voltage 25°C -40°C 85°C /g24/g19 /g25/g19 /g26/g19 /g27/g19 /g28/g19 /g20/g19/g19 /g20/g20/g19 /g20/g21/g19 /g22 /g25 /g28 /g20/g21 /g20/g24 /g20/g27 /g21/g20 /g21/g23 /g16 /g20 /g22 /g16 /g20 /g20 /g16 /g28/g16 /g26/g16 /g24/g16 /g22/g16 /g20/g20/g22/g24/g26/g28 /g38/g88/g85/g85/g72/g81/g87/g3/g11/g80/g36/g12/g3 /g50/g88/g87/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 /g44/g81/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 POUT and Current versus Input Power (850MHz) /g51/g50/g56/g55/g3/g11/g21/g24/g131/g38/g12/g51/g50/g56/g55/g3/g11/g16/g23/g19/g131/g38/g12 /g51/g50/g56/g55/g3/g11/g27/g24/g131/g38/g12/g44/g38/g38/g3/g11/g21/g24/g131/g38/g12 /g44/g38/g38/g3/g11/g16/g23/g19/g131/g38/g12/g44/g38/g38/g3/g11/g27/g24/g131/g38/g12 /g24/g19 /g25/g19 /g26/g19 /g27/g19 /g28/g19 /g20/g19/g19 /g20/g20/g19 /g20/g21/g19 /g22 /g25 /g28 /g20/g21 /g20/g24 /g20/g27 /g21/g20 /g21/g23 /g16 /g20 /g22 /g16 /g20 /g20 /g16 /g28/g16 /g26/g16 /g24/g16 /g22/g16 /g20/g20/g22/g24/g26/g28 /g38/g88/g85/g85/g72/g81/g87/g3/g11/g80/g36/g12/g3 /g50/g88/g87/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 /g44/g81/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 POUT and Current versus Input Power (2140MHz) /g51/g50/g56/g55/g3/g11/g21/g24/g131/g38/g12/g51/g50/g56/g55/g3/g11/g16/g23/g19/g131/g38/g12 /g51/g50/g56/g55/g3/g11/g27/g24/g131/g38/g12/g44/g38/g38/g3/g11/g21/g24/g131/g38/g12 /g44/g38/g38/g3/g11/g16/g23/g19/g131/g38/g12/g44/g38/g38/g3/g11/g27/g24/g131/g38/g12 /g24/g19 /g25/g19 /g26/g19 /g27/g19 /g28/g19 /g20/g19/g19 /g20/g20/g19 /g20/g21/g19 /g22 /g25 /g28 /g20/g21 /g20/g24 /g20/g27 /g21/g20 /g21/g23 /g16/g20/g22 /g16/g20/g20 /g16/g28 /g16/g26 /g16/g24 /g16/g22 /g16/g20 /g20 /g22 /g24 /g26 /g28 /g38/g88/g85/g85/g72/g81/g87/g3/g11/g80/g36/g12/g3 /g50/g88/g87/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 /g44/g81/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 POUT and Current versus Input Power (2650MHz) /g51/g50/g56/g55/g3/g11/g21/g24/g131/g38/g12/g51/g50/g56/g55/g3/g11/g16/g23/g19/g131/g38/g12 /g51/g50/g56/g55/g3/g11/g27/g24/g131/g38/g12/g44/g38/g38/g3/g11/g21/g24/g131/g38/g12 /g44/g38/g38/g3/g11/g16/g23/g19/g131/g38/g12/g44/g38/g38/g3/g11/g27/g24/g131/g38/g12 100 110 Current (mA) Frequency (GHz) Large Signal Current versus Frequency (25°C, 50Ω) Input Power = +2dBm Input Power = +5dBm Input Power = +8dBm

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Evaluation Board Schematic 500MHz to 3000MHz Application Circuit for Linear Operation Evaluation Board Bill of Materials (BOM) 500MHz to 3000MHz Application Circuit Description Reference Designator Manufacturer Manufacturer’s P/N GA2054 Evaluation Board GA2054-410(A) CAP, 1F, 20%, 25V, TANT-A C1 AVX Corporation TAJA105M025 CAP, 1000pF, 10%, 50V, X7R, 0402 C4, C6-C7 Taiyo Yuden (USA), Inc. RM UMK105BJ102KV-F CAP, 100pF, 5%, 50V, C0G, 0402 C5 Taiyo Yuden (USA), Inc. RM UMK105CG101JV-F IND, 82nH, 10%, W/W, 0805 L1 Coilcraft, Inc. 0805CS-820XKBC CONN, SMA, END LNCH, FLT, 0.062" J1-J2 Johnson Components, Inc. 142-0701-821 CONN, HDR, ST, PLRZD, 2-PIN, 0.100" P1 ITW Pancon MPSS100-2-C InGaP Darlington HBT Gain Block U1 RFMD GA2044 Do Not Place C2-C3, R1-R2

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Evaluation Board Assembly Drawing Pin Names and Descriptions Pin Name Description 1R F I N RF Input. External DC block is required. 2G N D DC and RF Ground 3R F O U T / V C C RF Output, Device Collector 4G N D DC and RF Ground. Must be soldered to EVB ground plane over a bed of vias for thermal and RF perfor- mance.

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Typical Performance under Saturated Operation, R2 = 5.1 K Evaluation Board Schematic for Saturated Operation /g19 /g20/g19 /g21/g19 /g22/g19 /g23/g19 /g24/g19 /g25/g19 /g26/g19 /g27/g19 /g28/g19 /g20/g19/g19 /g20/g20/g19 /g19 /g21 /g23 /g25 /g27 /g20/g19 /g20/g21 /g20/g23 /g20/g25 /g20/g27 /g21/g19 /g21/g21 /g16/g20/g24 /g16/g20/g22 /g16/g20/g20 /g16/g28 /g16/g26 /g16/g24 /g16/g22 /g16/g20 /g20 /g22 /g24 /g26 /g28 /g20/g20 /g20/g22 /g20/g24 /g38/g88/g85/g85/g72/g81/g87/g3/g11/g80/g36/g12/g3 /g50/g88/g87/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 /g44/g81/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 POUT and Current versus Input Power (850MHz) /g51/g50/g56/g55/g3/g11/g21/g24/g131/g38/g12 /g51/g50/g56/g55/g3/g11/g16/g23/g19/g131/g38/g12 /g51/g50/g56/g55/g3/g11/g27/g24/g131/g38/g12 /g44/g38/g38/g3/g11/g21/g24/g131/g38/g12 /g44/g38/g38/g3/g11/g16/g23/g19/g131/g38/g12 /g44/g38/g38/g3/g11/g27/g24/g131/g38/g12 /g19 /g20/g19 /g21/g19 /g22/g19 /g23/g19 /g24/g19 /g25/g19 /g26/g19 /g27/g19 /g28/g19 /g20/g19/g19 /g20/g20/g19 /g19 /g21 /g23 /g25 /g27 /g20/g19 /g20/g21 /g20/g23 /g20/g25 /g20/g27 /g21/g19 /g21/g21 /g16/g20/g24 /g16/g20/g22 /g16/g20/g20 /g16/g28 /g16/g26 /g16/g24 /g16/g22 /g16/g20 /g20 /g22 /g24 /g26 /g28 /g20/g20 /g20/g22 /g20/g24 /g38/g88/g85/g85/g72/g81/g87/g3/g11/g80/g36/g12/g3 /g50/g88/g87/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 /g44/g81/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 POUT and Current versus Input Power (2140MHz) /g51/g50/g56/g55/g3/g11/g21/g24/g131/g38/g12 /g51/g50/g56/g55/g3/g11/g16/g23/g19/g131/g38/g12 /g51/g50/g56/g55/g3/g11/g27/g24/g131/g38/g12 /g44/g38/g38/g3/g11/g21/g24/g131/g38/g12 /g44/g38/g38/g3/g11/g16/g23/g19/g131/g38/g12 /g44/g38/g38/g3/g11/g27/g24/g131/g38/g12 /g19 /g20/g19 /g21/g19 /g22/g19 /g23/g19 /g24/g19 /g25/g19 /g26/g19 /g27/g19 /g28/g19 /g20/g19/g19 /g20/g20/g19 /g19 /g21 /g23 /g25 /g27 /g20/g19 /g20/g21 /g20/g23 /g20/g25 /g20/g27 /g21/g19 /g21/g21 /g16 /g20 /g24 /g16 /g20 /g22 /g16 /g20 /g20/g16 /g28/g16 /g26/g16 /g24/g16 /g22/g16 /g20/g20/g22/g24/g26/g28/g20 /g20/g20 /g22/g20 /g24 /g38/g88/g85/g85/g72/g81/g87/g3/g11/g80/g36/g12/g3 /g50/g88/g87/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 /g44/g81/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 POUT and Current versus Input Power (85°C) /g51/g50/g56/g55/g3/g11/g27/g24/g19/g48/g43/g93/g12 /g51/g50/g56/g55/g3/g11/g21/g20/g23/g19/g48/g43/g93/g12 /g51/g50/g56/g55/g3/g11/g21/g25/g24/g19/g48/g43/g93/g12 /g44/g38/g38/g3/g11/g27/g24/g19/g48/g43/g93/g12 /g44/g38/g38/g3/g11/g21/g20/g23/g19/g48/g43/g93/g12 /g44/g38/g38/g3/g11/g21/g25/g24/g19/g48/g43/g93/g12 /g19 /g20/g19 /g21/g19 /g22/g19 /g23/g19 /g24/g19 /g25/g19 /g26/g19 /g27/g19 /g28/g19 /g20/g19/g19 /g20/g20/g19 /g19 /g21 /g23 /g25 /g27 /g20/g19 /g20/g21 /g20/g23 /g20/g25 /g20/g27 /g21/g19 /g21/g21 /g16/g20/g24 /g16/g20/g22 /g16/g20/g20 /g16/g28 /g16/g26 /g16/g24 /g16/g22 /g16/g20 /g20 /g22 /g24 /g26 /g28 /g20/g20 /g20/g22 /g20/g24 /g38/g88/g85/g85/g72/g81/g87/g3/g11/g80/g36/g12/g3 /g50/g88/g87/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 /g44/g81/g83/g88/g87/g3/g51/g82/g90/g72/g85/g3/g11/g71/g37/g80/g12/g3 POUT and Current versus Input Power (2650MHz) /g51/g50/g56/g55/g3/g11/g21/g24/g131/g38/g12 /g51/g50/g56/g55/g3/g11/g16/g23/g19/g131/g38/g12 /g51/g50/g56/g55/g3/g11/g27/g24/g131/g38/g12 /g44/g38/g38/g3/g11/g21/g24/g131/g38/g12 /g44/g38/g38/g3/g11/g16/g23/g19/g131/g38/g12 /g44/g38/g38/g3/g11/g27/g24/g131/g38/g12

support, contact RFMD at (+1) 336-678-5570 or customerservice@rfmd.com. Branding Diagram Package Drawing Dimensions in millimeters [inches] Refer to drawing posted at www.rfmd.com for tolerances.