RF6001 RFMD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

RF Micro Devices, Inc.

7628 Thorndike Road

Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://www.rfmd.com Optimum Technology Matching® Applied Si BJT GaAs MESFETGaAs HBT Si Bi-CMOS SiGe HBT Si CMOS InGaP/HBT GaN HEMT SiGe Bi-CMOSSDI SCLK LDTO VDDRX TXEN MS/ TXIB MCKO/ TXQB MDI/ TXQ SSB DCAD RXEN TXST DAC2 DCP VCC VTC DAC1 DCV2 VCO2 GPO1 GPO2 OSCO OSCOM OSCM VT VCO1P OSCB OSCA VDD BGDC VCO1N IBIN IIN QIN QBIN FSR/ QOUT DRI/ QBOUT ENR/ IOUT CLKR/ IBOUT VCCV DCD TXI DRQ DCV1 GND DCO VCO1 FIN 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 ADC ADC LPF Digital Processing Decimation Downconversion Channel Filters Standard Serial Interface Digital VREG ADC VREG Ref. Osc. Osc. VREG Serial Programming Interface Control and Calibration PA Ramp Control Charge Pump Phase Detector Fractional Divider GMSK Modulator TX Interface DAC 1 and DAC 2 LPF DAC DAC Output Mux Loop Filters VCO2 VCO1 VCO VREG RF6001 FRACTIONAL-N RF SYNTHESIZER WITH MODULATOR AND DIGITAL IF FILTER

  • GSM/DCS Handsets
  • GSM/DCS/PCS Handsets
  • Quad-Band GSM Handsets
  • Multi-Band EDGE RX Handsets
  • Multi-Band GPRS Handsets The RF6001 is a combination synthesizer and signal pro- cessing IC, which along with the RF2710/RF2716 Very- Low-IF Receive IC, constitu tes RFMD's low-cost GSM transceiver solution. The high-performance fractional-N synthesizer offers numerous features including a fully dig- ital GMSK modulator with pr ovisions for an analog I/Q interface and extremely low current consumption. The signal processor section provides a digital receive filter path designed to complement the RF2710/RF2716. The IF inputs are digitized, filtered and downconverted to baseband I and Q signals. The flexible baseband inter- face can be configured for either analog or digital opera- tion. Chip functionality is controlled through a three-wire serial data interface (SDI) bus.
  • Fractional-N Synthesizer with Digital GMSK Modulator
  • Signal Processing Circuitry for use with RF2710/RF2716 VLIF Receiver
  • Versatile Baseband Interface
  • Integrated RF Transmit VCO’s RF6001 Fractional-N RF Synthe sizer with Modulator and Dig- ital IF Filter RF6001 PCBA Fully Assembled Evaluation Board Rev A6 030528

3.37 TYP

3.50 TYP

-A- -B-

7.00 TYP

6.75 TYP

2 PLCS

0.10 C A

0.10 C B

-C- SEATING PLANE 0.08 C 0.90 0.85 0.70 0.650.05 0.00 NOTES: 1. Shaded lead is Pin 1. 2. Die thickness allowable is 0.305 mm max. (0.012 inches max.). Dimension applies to plated terminal and is measured between 0.20 mm and 0.25 mm from terminal tip. 4. Package warpage maximum 0.08 mm. Applied for exposed pad and terminals. Exlude embedding part of exposed pad from measuring. 0.30 0.18 0.10 C ABM 0.60

0.24 TYP

0.60 0.50 0.30 TYP 5.25 4.95 SQ 0.50 Package Style: QFN, 48-Pin, 7x7 Preliminary

at (336) 678-5570 for more information.