DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

Matching ® Applied GaAs HBT InGaP HBT GaAs MESFET SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trade- Product Description

7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. InP HBT LDMOS RF MEMS RF3025 SPDT, HIGH ISOLATION, SINGLE CONTROL, ABSORPTIVE SWITCH The RF3025 is a high isolation single-pole double-throw (SPDT) absorptive switch designed for general purpose switching applications requirinng moderate insertion loss and power handling capability. It features single- bit control with operation as low as 3 V. This GaAs pHEMT switch is housed in a compact 3 mm, 16-pin, leadless QFN package.  10 MHz to 6 GHz Operation  0.5 dB Insertion Loss at 1 GHz  1.1 dB Insertion Loss at 6 GHz  Terminated Off State  58 dB Isolation at 1 GHz  39 dBm Isolation at 6 GHz  3 V Minimum Voltage  50 dBm IP3 at 5 V

Applications

 Cellular Handset Applications  Antenna Tuning Applications  IEEE802.11b/g WLAN  Cellular Infrastructure Package: QFN, 16-Pin, 3 mm x 3 mm RF3025SPDT, High Isolation, Single Control, Absorptive Switch Parameter Specification Unit ConditionMin. Typ. Max. Insertion Loss 0.45 dB Freq = 10 MHz to 1.0 GHz 0.5 0.8 dB Freq = 1.0 GHz to 2.0 GHz 0.55 dB Freq = 2.0 GHz to 3.0 GHz 0.8 dB Freq = 3.0 GHz to 5.0 GHz 1.1 dB Freq = 5.0 GHz to 6.0 GHz Return Loss 18 dB Freq = 10 MHz to 1.0 GHz, Freq = 1.0 GHz to 3.0 GHz 13 dB Freq = 3.0 GHz to 6.0 GHz Return Loss into Off Port 14 dB Freq = 0.5 GHz to 0.8 GHz 16 dB Freq = 0.8 GHz to 1.0 GHz 17 dB Freq = 1.0 GHz to 3.0 GHz 12 dB Freq = 3.0 GHz to 6.0 GHz Isolation 58 dB Freq = 0.5 GHz to 1.0 GHz 50 52 dB Freq = 1.0 GHz to 2.0 GHz 48 dB Freq = 2.0 GHz to 3.0 GHz 42 dB Freq = 3.0 GHz to 5.0 GHz 39 dB Freq = 5.0 GHz to 6.0 GHz P0.1dB 30 dBm Freq = 1.8 GHz IP3 50 dBm Freq = 0.5 GHz to 2.5 GHz, 1 MHz spacing, 10 dBm/tone I DD, Supply Current 200 300 uA IC, Control Current 20 uA TON, TOFF 35 nS 50% of VCTRL to 10/90% of RF TRISE, TFALL 120 10/90% RF Test Conditions: V DD = 5 V, 25°C, 50 , with application circuit with 100 pF DC blocking capacitors

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. RF3025 Truth Table Evaluation Board Layout All Capacitors are 100 pF Absolute Maximum Ratings Parameter Rating Unit Supply Voltage VDD 5.5 V Control Voltage (VC) 5.5 V RF Input Power (on state) 32 dBm RF Input Power (terminated port) 24 dBm Operating Temp Range (T L) -40 to +85 °C Storage Temp -55 to +150 °C Moisture Sensitivity Level MSL2 VC RFC-RF1 RFC-RF2

0 OFF ON

1 ON OFF

Logic ‘0’: 0 V < VC < 1.0 V Logic ‘1’: 2 V < VC < 5 V Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical perfor- mance or functional operation of the device under Absolute Maximum Rating condi- tions is not implied. RoHS status based on EU Directive 2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice.

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. RF3025 Evaluation Board Schematic

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. RF3025 Package Drawing Dimensions in millimeters Refer to drawing posted at www.rfmd.com for tolerances. Pin Function Description 1 GND Ground. 2 GND Ground. 3 RFC RF Common. External DC Block required. 4 GND Ground. 5 VDD Supply Voltage. 6 GND Ground. 7 GND Ground. 8 RF1 RF Port 1. External DC Block required. 9 GND Ground. 10 GND Ground. 11 GND Ground. 12 GND Ground. 13 RF2 RF Port 2. External DC Block required. 14 GND Ground. 15 GND Ground. 16 VC Control Voltage. 17 Paddle Ground.

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. RF3025 Typical Performance at 25°C, VDD = 5 V

support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. RF3025

Ordering Information

RF3025 Sample bag with 25 pieces RF3025SR 7” Reel with 100 pieces RF3025TR7 7” Reel with 2500 pieces RF3025PCK-410 500 MHz to 4000 MHz PCBA with 5-piece sample bag