DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
Matching® Applied GaAs HBT InGaP HBT GaAs MESFET SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trade- Product Description
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. InP HBT LDMOS RF MEMS RF3024 BROADBAND MEDIUM POWER SPDT SWITCH The RF3024 is a GaAs pHEMT single -pole double-throw (SPDT) switch designed for general purpose switching applications which require very low insertion loss, moderate isolation, and medium power handling capa- bility. The RF3024 is ideally suited for battery-powered and low control voltage applications. RF1 GND RF2 RFC 300kHz to 4GHz Operation 0.25dB Insertion Loss at 1GHz 26dB Isolation at 2GHz 1.8V Minimum Control Voltage 28dBm P0.1dB at 3V 18dBm P0.1dB at 1.8V 58dBm IP3 at 3V
Applications
Cellular Handset Applications Antenna Tuning Applications IEEE 802.11b/g WLAN Appli- cations Cellular Infrastructure Appli- cations DS100728 RF3024 Parameter Specification Unit ConditionMin. Typ. Max. Insertion Loss 0.25 dB 1GHz 0.3 0.4 dB 2GHz 0.45 dB 3GHz VSWR 1.15 1GHz 1.2 2GHz 1.33 3GHz Isolation 26 dB 1GHz 22 26 dB 2GHz 27 dB 3 GHz P1dB 31 dBm 1GHz 32 dBm 2GHz P0.1dB 28 dBm 1GHz IP3 60 dBm 1GHz, 1MHz Spacing, 15dBm per tone 58 dBm 2GHz, 1MHz Spacing, 15dBm per tone T ON, TOFF 40 nS 50% of V CTRL to 10/90% of RF TRISE, TFALL 30 nS 10/90% RF Test Conditions: 3.0V, 50, 25°C, with Application Circuit shown herein.
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. RF3024 Switch Control Settings Evaluation Board Schematic Absolute Maximum Ratings Parameter Rating Unit Control Voltage 7.0 V Maximum Input Power +36 dBm Operating Temperature -40 to +85 °C Storage Temperature -55 to +150 °C MSL Rating 1 Control Signals Signal Paths V1 V2 RFC-RF1 RFC-RF2 Valid States
10 O N O F F
01 O F F O N
0 0 Indeterminate State* 1 1 Indeterminate State* 0: Logic level low, 0V~0.2V 1: Logic level high, 1.8V~5.0V *In indeterminate states, both signal paths are in high insertion loss states, ~10dB. Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical perfor- mance or functional operation of the device under Absolute Maximum Rating condi- tions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended appli- cation circuitry and specifications at any time without prior notice. 100 pF RF1 100 pF RF2 100 pF 100 pF RFC 100 pF
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. RF3024 Package Drawing Pin Function Description 1R F 1 RF Port 1. 2G N D Ground. 3R F 2 RF Port 2. 4V 2 RF2 Control Voltage. 5R F C Common RF Port. 6V 1 RF1 Control Voltage.
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. RF3024 Typical Performance Temp=25°C, VCONTROL=3.0V Note: Low Frequency RL performance can be improved using larger DC blocking capacitors. (dBm) Frequency (GHz) IP3 versus Frequency (15 dBm tones, 3V) -40°C 25°C 85°C -40 -35 -30 -25 -20 -15 -10 Isolation (dB) Frequency (GHz) Isolation versus Frequency +85°C +25°C -40°C -40 -35 -30 -25 -20 -15 -10 Return Loss (dB) Frequency (GHz) Return Loss versus Frequency +85°C +25°C -40°C -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 Insertion Loss (dB) Frequency (GHz) Insertion Loss versus Frequency +85°C +25°C -40°C Input Compression Power (dB) Control Voltage (V) Input P1dB Compression Point versus Control Voltage (1980MHz) +85°C +25°C -40°C Input Compression Power (dB) Control Voltage (V) Input P1dB Compression Point versus Control Voltage (915MHz) +85°C +25°C -40°C
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. RF3024
Ordering Information
RF3024 Sample bag with 25 pieces RF3024SR 7” reel with 100 pieces RF3024TR7 7” reel with 2500 pieces RF3024PCK-410 500MHz PCBA with 5 piece sample bag