R82EC3680-7

R82CC4220AA70J KEMET | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Dielectric: polyester film (polyethylene terephthalate). Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. l eads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Marking: Capacitance, tolerance, D.C. rated voltage. Climatic category: 55/105/56 I eC 60068-1 Operating temperature range: -55 to +105°C Related documents: I eC 60384-2 PRODuCT CODe SySTeM The part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 R 8 2 C - Digit 1 to 3 Series code. Digit 4 d.c. rated voltage: C = 50V D = 63V e = 100V I = 250V M = 400V Digit 5 Pitch: C = 5 mm Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 1

1 Mechanical version and/or packaging (table1)

Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use Digit 14 Capacitance tolerance: Table 1 (for more detailed information, please refer to page 14). Standard packaging style l ead length Ordering code (mm) (Digit 10 to 11) AMMo-PACK DQ Reel Ø 355 mm CK Loose, short leads 4 +1.5 AA Loose, long leads 17 +1/-2 Z3 R82 MKT Series MeTAllIZeD POlyeSTeR FIlM CAPACITOR D .C. MulTIPuRPOSe APPlICATIONS Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. PR oDUCT CoDe: R82 p = 5mm single sided metallized polyester film Winding scheme B ≤6 >6 Ød ±0.05 0.5 0.6 Pitch Box thickness (B) Maximum dimensions (mm) (mm) (mm) B max H max L max Loose Taped All dimensions are in mm.

MeTAllIZeD POlyeSTeR FIlM CAPACITOR D .C. MulTIPuRPOSe APPlICATIONS p = 5 mm PRoDUCT CoDe: R82 Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V R /V. The pulse characteristic K 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. Rated Cap. 250Vdc/160Vac Std dimensions Max dv/dt Max K0 Part Number B H L p (V/µs) (V 2/µs) 6800 pF 2.5 6.5 7.2 5.0 250 125 e3 R82IC 1680--5- a) STACKeD version b) WOuND version Rated Cap. 50Vdc/30Vac Std dimensions Max dv/dt Max K0 Part Number B H L p (V/µs) (V 2/µs) Rated Cap. 63Vdc/40Vac Std dimensions Max dv/dt Max K0 Part Number B H L p (V/µs) (V 2µs) Rated Cap. 100Vdc/63Vac Std dimensions Max dv/dt Max K0 Part Number B H L p (V/µs) (V 2/µs) 1000 pF 2.5 6.5 7.2 5.0 200 40 e3 R82eC 1100--5-- 1500 pF 2.5 6.5 7.2 5.0 200 40 e3 R82eC 1150--5-- 2200 pF 2.5 6.5 7.2 5.0 200 40 e3 R82eC 1220--5-- 3300 pF 2.5 6.5 7.2 5.0 200 40 e3 R82eC 1330--5-- 4700 pF 2.5 6.5 7.2 5.0 200 40 e3 R82eC 1470--5-- 6800 pF 2.5 6.5 7.2 5.0 200 40 e3 R82eC 1680--5-- STACKeD version Mechanical version and packaging (Table1) Internal use Tolerance: J (±5%); K (±10%); M (±20%) Mechanical version and packaging (Table1) Internal use Tolerance: J (±5%); K (±10%); M (±20%) Rated Cap. 250Vdc/140Vac Re DuCeD SIZeS Std dimensions Max dv/dt Max K0 Part Number B H L p (V/µs) (V 2/µs) Mechanical version and packaging (Table1) Internal use Tolerance: J (±5%); K (±10%); M (±20%) Rated Cap. 400Vdc/160Vac Re DuCeD SIZeS Std dimensions Max dv/dt Max K0 Part Number B H L p (V/µs) (V 2µs) 6800 pF 2.5 6.5 7.2 5.0 200 160 e3 R82MC1680--6-- Rated Cap. 400Vdc/200Vac Std dimensions Max dv/dt Max K0 Part Number B H L p (V/µs) (V 2µs) 1000 pF 2.5 6.5 7.2 5.0 400 320 e3 R82MC1100--5-- 1500 pF 2.5 6.5 7.2 5.0 400 320 e3 R82MC1150--5-- 2200 pF 2.5 6.5 7.2 5.0 400 320 e3 R82MC1220--5-- 3300 pF 2.5 6.5 7.2 5.0 400 320 e3 R82MC1330--5-- 4700 pF 2.5 6.5 7.2 5.0 400 320 e3 R82MC1470--5-- 6800 pF 3.5 7.5 7.2 5.0 400 320 e3 R82MC1680--5-- All dimensions are in mm.

MeTAllIZeD POlyeSTeR FIlM CAPACITOR D .C. MulTIPuRPOSe APPlICATIONS p = 5 mm PRoDUCT CoDe: R82 ele CTRICAl ChARACTeRISTICS Rated voltage (VR):

50 Vdc 63 Vdc 100 Vdc

250 Vdc 400 Vdc

Rated temperature (TR): +85 °C Temperature derated voltage: for temperatures between +85°C and +105°C a decreasing factor of 1.25% per degree °C on the rated voltage VR (d.c. and a.c.) has to be applied. Capacitance range: 1000pF to 4.7µF Capacitance values: e6 series (IeC 60063 Norm). Capacitance tolerances (measured at 1 khz): T otal self-inductance (l): ≈7nH max 1 nH per 1 mm lead and capacitor length. Dissipation factor (DF): tgδ 10-4 at +25°C ±5°C kHz C ≤ 0.1µF C > 0.1µF 100 ≤ 80 ≤ 120 ≤ 250 ≤ 80 ≤ 120 Insulation resistance: Test conditions T emperature: +25°C±5°C Voltage charge time: 1 min Voltage charge:

50 Vdc for VR <100 Vdc

100 Vdc for VR ≥100 Vdc

For VR ≤100 Vdc 15000 MΩ for C ≤ 0.33µF ≥ 5000 s for C > 0.33µF and ≤1µF 1000 s for C > 1µF For VR >100 Vdc 30000 MΩ *Typical value Test voltage between terminations: 1.4xVR applied for 2 s at +25°C±5°C. TeST MeThOD AND PeRFORMANCe Damp heat, steady state: Test conditions T emperature: +40°C±2°C Relative humidity (RH): 93% ±2% Test duration: 56 days Performance Capacitance change |∆C/C|: ≤ 5% DF change (∆tgδ): ≤ 50x10-4 at 1kHz Insulation resistance: ≥ 50% of initial limit. endurance: Test conditions T emperature: +105°C ±2°C Test duration: 2000 h Voltage applied: 1.25xVC Performance Capacitance change |∆C/C|: ≤ 5% DF change (∆tgδ): ≤ 30x10-4 at 10kHz for C≤1µF ≤ 20x10-4 at 1kHz for C>1µF Insulation resistance: ≥50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260°C±5°C Dipping time (with heat screen):10 s ±1 s Performance Capacitance change |∆C/C|: ≤2% DF change (∆tgδ): ≤ 30x10-4 at 10kHz for C≤ 1µF ≤ 20x10-4 at 1kHz for C> 1µF Insulation resistance: ≥ initial limit. long term stability (after two years): Storage: standard environmental conditions (see page 12). Performance Capacitance change |∆C/C|: ≤ 3% for C≤ 0.1µF ≤ 2% for C> 0.1µF RelIABIlITy: Reference MIL HDB 217 Application conditions: T emperature: +40°C±2°C Voltage: 0.5xVR Failure rate: ≤ 1 FIT (1 FIT = 1x10-9 failures/components x h) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change |∆C/C|: > 10% DF change (∆tgδ): > 2 x initial limit. Insulation resistance: < 0.005 x initial limit.

MeTAllIZeD POlyeSTeR FIlM CAPACITOR D .C. MulTIPuRPOSe APPlICATIONS p = 5 mm PRoDUCT CoDe: R82 MAX. VoLTAGe (Vr.m.s.) VeRSUS FReQUeNCY (sinusoidal wave-form / Th ≤ 40°C)

MeTAllIZeD POlyeSTeR FIlM CAPACITOR C. MulTIPuRPOSe APPlICATIONS p = 5 mm PRoDUCT CoDe: R82 MAX. CURReNT (Ir.m.s.) VeRSUS FReQUeNCY (sinusoidal wave-form / Th ≤ 40°C) Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applic ations, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitabi lity for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice in ferred from this Inform ation or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the ad vice given or results obtained.