R76PD0680XX0XX

R76ID1680XX3XX KEMET | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS typical applications: deflection circuits in TV-sets (S- correction and fly-back tuning) and monitors, switching spikes suppression in SMPS, lamp capacitor for electronic ballast and compact lamps, S nubber and SCR commutating circuits, applications with high voltage and high current. PRODUCT CODE: R76 Table 1 (for more detailed information, please refer to pages 14). Standard packaging style l ead length taping style ordering code (mm) (mm) Fig. (No.) Pitch (mm) (Digit 10 to 11) AMMO-PACK 06.35 1 7.5 DQ AMMO-PACK 12.70 2 10.0/15.0 DQ AMMO-PACK 19.05 3 22.5 DQ ree L Ø 355mm 06.35 1 7.5 CK ree L Ø 355mm 12.70 2 10.0/15.0 GY ree L Ø 500mm 12.70 2 10.0/15.0 CK ree L Ø 500mm 19.05 3 22.5/27.5 CK Loose, short leads 04+2 Se Loose, long leads Loose, long leads (p10mm) 18+1/-1 JM Loose, long leads (p≥15mm) 30+5 25+2/-1 Note: Ammo-pack is the preferred packaging for taped version Loose Taped Pitch Box thickness Maximum dimensions (mm) (mm) (mm) B max H max L max 7.5 All B +0.1 H +0.1 L +0.2 10.0 All B +0.2 H +0.1 L +0.2 22.5 All B +0.2 H +0.1 L +0.3 27.5 All B +0.2 H +0.1 L +0.3 37.5 All B +0.3 H +0.1 L +0.3 p = 7.5 p =10 15 ≤ p ≤27.5 p = 37.5 b ≤3,5 >3,5 all all all All dimensions are in mm. pRoDUct coDE SyStEM The part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 r 7 6 - Digit 1 to 3 Series code. Digit 4 d.c. rated voltage: I = 250V M = 400V P = 630V Q = 1000V T = 1600V U = 2000V Digit 5 Pitch: D=7.5 mm; F=10mm; I=15mm; N=22.5mm; R=27.5mm; W=37.5mm. Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use. Digit 14 Capacitance tolerance: GENER al tEcHNical Data Dielectric: polypropylene film. p lates: double sided metallized polyester film. Winding: non-inductive type. l eads: for Ø ≥ 0,6mm : tinned wire for Ø = 0,5mm : tinned wire, low thermical conductivity protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: manufacturer ’s logo, series (R76), dielectric code (MKP), capacitance, tolerance, D.C. rated voltage, manufacturing date code. climatic category: 55/105/56 IEC 60068-1 operating temperature range: -55 to +105°C Related documents: IEC 60384-16

polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 Rated cap. 250Vdc / 180Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) Rated cap. 250Vdc / 180Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) 6800 pF 3.0 8.0 10.0 7.5 1100 55 E4 R76ID1680--3-- 8200 pF 3.0 8.0 10.0 7.5 1100 55 E4 R76ID1820--3-- All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (Vr), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio Vr /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. Mechanical version and packaging (Table1) Internal use Tolerance: J (±5%); K (±10%) Mechanical version and packaging (Table1) Internal use Tolerance: J (±5%); K (±10%) 1 section (250Vdc) double sided metallized polyester carrier film polypropylene film dielectric

polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 Rated cap. 400Vdc / 250Vac* Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) 1 section (400Vdc) Rated cap. 400Vdc / 250Vac* Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) 2700 pF 3.0 8.0 10.0 7.5 1700 136 E4 R76MD 1270--3-- 3300 pF 3.0 8.0 10.0 7.5 1700 136 E4 R76MD 1330--3-- 3900 pF 3.0 8.0 10.0 7.5 1700 136 E4 R76MD 1390--3-- 4700 pF 3.0 8.0 10.0 7.5 1700 136 E4 R76MD 1470--3-- 5600 pF 3.0 8.0 10.0 7.5 1700 136 E4 R76MD 1560--3-- 6800 pF 4.0 9.0 10.0 7.5 1700 136 E4 R76MD 1680--4-- 8200 pF 4.0 9.0 10.0 7.5 1700 136 E4 R76MD 1820--4-- All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (V r), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio Vr /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145). Mechanical version and packaging (Table1) Internal use Tolerance: J (±5%); K (±10%) Mechanical version and packaging (Table1) Internal use Tolerance: J (±5%); K (±10%) double sided metallized polyester carrier film polypropylene film dielectric

polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 1 section (630Vdc/250Vac) double sided metallized polyester carrier film polypropylene film dielectric Rated cap. 630Vdc/250Vac* Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) 680 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD0680--0-- 820 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD0820--0-- 1000 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD1100--0-- 1200 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD1120--0-- 1500 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD1150--0-- 1800 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD1180--0-- 2200 pF 3.0 8.0 10.0 7.5 2800 353 E4 R76PD1220--0-- 2700 pF 4.0 9.0 10.0 7.5 2800 353 E4 R76PD1270--4-- 3300 pF 4.0 9.0 10.0 7.5 2800 355 E4 R76PD1330--4-- 3900 pF 4.0 9.0 10.0 7.5 2800 353 E4 R76PD1390--4-- 4700 pF 4.0 9.0 10.0 7.5 2800 353 E4 R76PD1470--4-- 5600 pF 4.0 9.0 10.0 7.5 2800 353 E4 R76PD1560--4-- 6800 pF 5.0 10.5 10.0 7.5 2800 353 E4 R76PD1680--4-- 8200 pF 5.0 10.5 10.0 7.5 2800 353 E4 R76PD1820--4-- Mechanical version and packaging (Table1) Internal use Tolerance: J (±5%); K (±10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (Vr), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V r /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page145)

polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 Rated cap. 630Vdc / 400Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) 3900 pF 4.0 9.0 13.0 10.0 3000 378 E4 R76PF1390--0-- 4700 pF 4.0 9.0 13.0 10.0 3000 378 E4 R76PF1470--0-- 5600 pF 4.0 9.0 13.0 10.0 3000 378 E4 R76PF1560--0-- 6800 pF 4.0 9.0 13.0 10.0 3000 378 E4 R76PF1680--0-- 8200 pF 4.0 9.0 13.0 10.0 3000 378 E4 R76PF1820--0-- Rated cap. 630Vdc / 400Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (Vr), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V r /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. 2 sections (630Vdc/400Vac) double sided metallized polyester carrier film polypropylene film dielectric single sided metallized polypropylene film Mechanical version and packaging (Table1) Internal use Tolerance: H (±2.5%); J (±5%); K (±10%)Mechanical version and packaging (Table1) Internal use Tolerance: H (±2.5%); J (±5%); K (±10%)

polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 2 sections (1000Vdc) double sided metallized polyester carrier film polypropylene film dielectric single sided metallized polypropylene filmAll dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (Vr), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio Vr /V. The pulse characteristic K0 depends on the voltage wave- form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. Tolerance H (+2.5%) for C ≥1000pF Rated cap. 1000Vdc / 400Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) 220 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0220--0-- 270 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0270--0-- 330 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0330--0-- 390 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0390--0-- 470 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0470--0-- 560 pF 3.0 8.0 10.0 7.5 6000 1200 E4 R76QD 0560--0-- 680 pF 4.0 9.0 10.0 7.5 6000 1200 E4 R76QD 0680--4-- 820 pF 4.0 9.0 10.0 7.5 6000 1200 E4 R76QD 0820--4-- 1000 pF 4.0 9.0 10.0 7.5 6000 1200 E4 R76QD 1100--4-- 1200 pF 4.0 9.0 10.0 7.5 6000 1200 E4 R76QD 1120--4-- 1500 pF 5.0 10.5 10.0 7.5 6000 1200 E4 R76QD 1150--4-- 1800 pF 5.0 10.5 10.0 7.5 6000 1200 E4 R76QD 1180--4-- 2200 pF 5.0 10.5 10.0 7.5 6000 1200 E4 R76QD 1220--4-- 2700 pF 6.0 12.0 10.5 7.5 6000 1200 E4 R76QD 1270--0-- 3300 pF 6.0 12.0 10.5 7.5 6000 1200 E4 R76QD 1330--0-- Mechanical version and packaging (Table1) Internal use Tolerance: H (±2.5%)*; J (±5%); K (±10%)

polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 Rated cap. 1000Vdc / 600Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) 470 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 0470--0-- 560 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 0560--0-- 680 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 0680--0-- 820 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 0820--0-- 1000 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1100--0-- 1200 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1120--0-- 1500 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1150--0-- 1800 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1180--0-- 2200 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1220--0-- 2700 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1270--0-- 3300 pF 4.0 9.0 13.0 10.0 4800 960 E4 R76QF 1330--3-- 3900 pF 5.0 11.0 13.0 10.0 4800 960 E4 R76QF 1390--3-- 4700 pF 5.0 11.0 13.0 10.0 4800 960 E4 R76QF 1470--3-- 5600 pF 6.0 12.0 13.0 10.0 4800 960 E4 R76QF 1560--3-- 6800 pF 6.0 12.0 13.0 10.0 4800 960 E4 R76QF 1680--3-- 8200 pF 4.0 10.0 18.0 15.0 3300 660 E4 R76QI 1820--4-- 8200 pF 5.0 11.0 18.0 15.0 3300 660 E4 R76QI 1820--0-- 2 sections (1000Vdc) double sided metallized polyester carrier film polypropylene film dielectric single sided metallized polypropylene film Mechanical version and packaging (Table1) Internal use Tolerance: H (±2.5%)*; J (±5%); K (±10%) All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (Vr), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V r /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. * Tolerance H (+2.5%) for C ≥1000pF Rated cap. 1000Vdc / 600Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) Mechanical version and packaging (Table1) Internal use Tolerance: H (±2.5%)*; J (±5%); K (±10%)

polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 Rated cap. 1600Vdc / 650Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) Rated cap. 1600Vdc / 650Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) 3300 pF 4.0 10.0 18.0 15.0 6000 1900 E4 R76TI1330--4-- 3300 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1330--3-- 3900 pF 4.0 10.0 18.0 15.0 6000 1900 E4 R76TI1390--4-- 3900 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1390--3-- 4700 pF 4.0 10.0 18.0 15.0 6000 1900 E4 R76TI1470--4-- 4700 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1470--3-- 5600 pF 4.0 10.0 18.0 15.0 6000 1900 E4 R76TI1560--4-- 5600 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1560--3-- 6800 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1680--3-- 8200 pF 5.0 11.0 18.0 15.0 6000 1900 E4 R76TI1820--4-- All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (Vr), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio Vr /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. Mechanical version and packaging (Table1) Internal use Tolerance: H (±2.5%); J (±5%); K (±10%) Mechanical version and packaging (Table1) Internal use Tolerance: H (±2.5%); J (±5%); K (±10%) 2 sections (1600Vdc) double sided metallized polyester carrier film polypropylene film dielectric single sided metallized polypropylene film

polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 Rated cap. 2000Vdc / 700Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) 1000 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1100--0-- 1200 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1120--0-- 1500 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1150--0-- 1800 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1180--0-- 2200 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1220--0-- 2700 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1270--0-- 3300 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1330--0-- 3900 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1390--0-- 4700 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1470--0-- 5600 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1560--0-- 6800 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1680--0-- 8200 pF 6.0 15.0 26.5 22.5 3500 1400 E4 R76UN1820--3-- Rated cap. 2000Vdc / 700Vac Std dimensions Max dv/dt Max K0 part Number b H L p (V/µs) (V 2/µs) 100 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0100--4-- 120 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0120--4-- 150 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0150--4-- 180 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0180--4-- 220 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0220--4-- 220 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0220--0-- 270 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0270--4-- 270 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0270--0-- 330 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0330--4-- 330 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0330--0-- 390 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0390--4-- 390 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0390--0-- 470 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0470--4-- 470 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0470--0-- 560 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0560--4-- 560 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0560--0-- 680 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0680--4-- 680 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0680--0-- 820 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 0820--4-- 820 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 0820--0-- 1000 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1100--4-- 1000 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1100--3-- 1200 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1120--4-- 1200 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1120--3-- 1500 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1150--4-- 1500 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1150--3-- 1800 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1180--4-- 1800 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1180--3-- 2200 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1220--4-- 2200 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1220--3-- 2700 pF 4.0 10.0 18.0 15.0 9500 3800 E4 R76UI 1270--4-- 2700 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1270--3-- 3300 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1330--4-- 3900 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1390--4-- 4700 pF 5.0 11.0 18.0 15.0 9500 3800 E4 R76UI 1470--4-- 5600 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R76UI 1560--4-- 6800 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R76UI 1680--4-- 8200 pF 6.0 12.0 18.0 15.0 9500 3800 E4 R76UI 1820--4-- All dimensions are in mm Note: If the working voltage (V) is lower than the rated voltage (Vr), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio V r /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. **Tolerance H ( ±2.5%) for C ≥1000pF 2 sections (2000Vdc) double sided metallized polyester carrier film polypropylene film dielectric single sided metallized polypropylene film Mechanical version and packaging (Table1) Internal use Tolerance: H (±2.5%)*; (J (±5%); K (±10%) Mechanical version and packaging (Table1) Internal use Tolerance: H (±2.5%); (J (±5%); K (±10%)

polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 t ESt MEtHoD aND pERFoRMaNcE Damp heat, steady state: test conditions Temperature: +40°C±2°C Relative humidity (RH): 93% ±2% T est duration: 56 days performance Capacitance change |∆C/C|: ≤2% DF change (∆tgδ): ≤10x10-4 at 1kHz Insulation resistance: ≥50% of initial limit. Endurance: test conditions Temperature: +85°C±2°C T est duration: 2000 h V oltage applied: 1.25xVr (d.c.) performance Capacitance change |∆C/C|: ≤2% DF change (∆tgδ): ≤10x10-4 at 110kHz for C≤1µF ≤10x10-4 at 111kHz for C>1µF Insulation resistance: ≥50% of initial limit. Resistance to soldering heat: test conditions Solder bath temperature: +260°C±5°C Dipping time (with heat screen):10 s±1 s performance Capacitance change |∆C/C|: ≤1% DF change (∆tgδ): ≤10x10-4 at 110kHz for C≤1µF ≤10x10-4 at 111kHz for C>1µF Insulation resistance: ≥initial limit. l ong term stability (after two years): Storage: standard environmental conditions (see page 12). p erformance Capacitance change |∆C/C|: ≤0.5% E lEctRical cHaRactERiSticS Rated voltage (VR): 250Vdc - 0400Vdc - 630Vdc for 1 section 630Vdc - 1000Vdc - 1600Vdc - 2000Vdc for 2 sections. Rated temperature (tR): +85°C for Vr (d.c.) +75°C for Vr (a.c.) temperature derated voltage: The following decreasing factor has to be applied on the rated voltage: +85°C to +105°C: 1.25% per °C for Vr (d.c.). +75°C to +105°C: 1.35% per °C for Vr (a.c.) capacitance range: 680pF to 15µF 1 section 100pF to 5.6µF 2 sections capacitance values: E12 series (IEC 60063 Norm). c apacitance tolerances (measured at 1 kHz): ±5% (J); ±10% (K) for C<1000pF total self-inductance (L): (Lead length ~2 mm) Pitch (mm) 7.5 10 15 22.5 27.5 37.5 L (nH) ≈ 8 9 10 18 18 20 Dissipation factor (DF): tgδx10-4 at +25°C ±5°C kHz C≤0.1µF 0.1µF<C≤1.0µF C>1µF 100 ≤030 ≤04 ≤15 insulation resistance: test conditions Temperature: +25°C±5°C V oltage charge time: 1 min V oltage charge: 100Vdc performance ≥1x105 MΩ for C≤0.33µF (5x105 MΩ)* ≥30000 s for C>0.33µF (150000 s)* * Typical value. test voltage between terminations: 1.6xVr applied for 2 s at +25°C±5°C

Note: p (pitch) in mm. R76 MMKP Series polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)

MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C) R76 MMKP Series polypRopylENE capacitoR WitH DoUBlE SiDED MEtalliZED FilM ElEctRoDES D.c. aND pUlSE applicatioNS PRODUCT CODE: R76 Note: p (pitch) in mm. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applic ations, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitabi lity for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice in ferred from this Inform ation or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the ad vice given or results obtained.