R6350

R6350_05 HAMAMATSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

13 mm (1/2 Inch) Diameter, 9-stage, Side-on Type GEmission Spectroscopy (ICP, Direct Reader) GEnvironmental Monitoring (NOx, SO2, etc.) GFluorescence Immunoassay GChemiluminescence Immunoassay GHygiene Monitor (Bio Luminescence) GX-ray Phototimer GFluorometer GMicroscope (Laser Scanning Microscope) 13 mm Dia. SIDE-ON COMPACT TYPE PHOTOMULTIPLIER TUBE SERIES The R6350 to R6358 series are compact side-on photomultiplier tubes with a 13 mm diameter and 50 mm height. Using different photocathode and window material combinations helped to pro- duce a full product lineup to cover a wide spectral response range from the UV to the near infrared. This allows selecting the optimal tube to match your application and wavelength to be detected, the same as when selecting the popular 28 mm (1-1/8 inch) side-on tubes. The R6356-06 and R6357 do not use an entrance mesh (grill) which is usually installed just inside the light input window. This eliminates the light loss caused by the entrance mesh, even if the size of incident light beam is small. Left: Fused silica window Center: UV window Right: Meshless type (R6356-06, R6357) Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2005 Hamamatsu Photonics K.K. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.

APPLICATIONS

13 mm Dia. SIDE-ON COMPACT TYPE PHOTOMULTIPLIER TUBE SERIES * Achieved the higher photocathode sensitivity by eliminating the mesh in front of the photocathode. It also features no output variation, disturbed by the mesh, when the incident light spot to the photocathode is small. NOTE: A Photocathode materials BA: Bialkali LBA: Low dark current bialkali MA: Multialkali LMA: Low dark current multialkali D Dynode structure CC: Circular-cage G Averaged over any interval of 30 seconds maximum. B Window materials Q: Fused silica U: UV glass E See optional accessories C Outline No. See Fig. 9 F The maximum operating ambient temperature range is -30 °C to +50 °C. Type No. R6350 R6351 R6352 R6353 R6354 R6355 R6356-06 * R6357 * R6358 For UV to visible range, general purpose. Synthetic silica window type of R6350 High sensitivity variant of R6350 Low dark current bialkali photocathode Low dark current multialkali photocathode For UV to near IR range, general purpose High sensitivity variant of R6355 Meshless type High sensitivity variant of R6356-06, Meshless type For UV range Remarks Side-On Compact Type Photomultiplier Tubes Range Peak Wave- length Photo- cathode Material Window Material Outline No. Dynode Structure No. of Stages Spectral Response (nm) (nm) (V) Socket Socket Assembly Anode to Cathode Voltage (mA) Average Anode Current (µA/lm) Min. (µA/lm) Typ. Maximum Ratings Cathode Sensitivity Luminous 185 to 650 160 to 650 185 to 750 185 to 680 160 to 320 185 to 850 185 to 900 185 to 900 185 to 830 340 340 420 400 230 530 400 450 530 Sb-Cs Sb-Cs BA LBA Cs-Te MA MA MA LMA CC/9 CC/9 CC/9 CC/9 CC/9 CC/9 CC/9 CC/9 CC/9 E678-11U/ E E678-11U/E E678-11U/E E678-11U/E E678-11U/E E678-11U/E E678-11U/E E678-11U/E E678-11U/E 1250 1250 1250 1250 1250 1250 1250 1250 1250 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 200 350 140 120 150 300 500 200 U Q U U Q U U U U FDCBA G

H Measured using red filter Toshiba R-68. L Anode characteristics are measured with the supply voltage and voltage distribution ratio specified by Note N. N Voltage distribution ratio and voltage. J Measured at the peak wavelength. M: at 254 nm K Refer to Note N. Supply Voltage: 1000 V, K: Cathode, Dy: Dynode, P: Anode Electrodes Distribution Ratio K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 P Type No.NotesLuminous Min. Anode Sensitivity Anode Characteristics Blue Sens. Index (CS 5-58) Typ. Red/ White Ratio Typ. Anode to Cathode Supply Voltage Radiant Typ. Anode Dark Current (After 30 min.) Typ. Cathode Sensitivity Gain Typ. Radiant Typ. (mA/W) (V) (A/lm) Typ. (A/lm) (A/W) Rise Time Typ. (ns) Electron Transit Time Typ. (ns)(nA) Max. (nA) Time Response Photon counting type: R6350P Dark Count 30 s-1 Max. Photon counting type: R6358-10 Dark Count 300 s-1 Max. Photon counting type: R6353P Dark Count 30 s-1 Max. R6350 R6351 R6352 R6353 R6354 R6355 R6356-06 * R6357 * R6358 0.5 0.5 0.1 0.5 0.1 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 6.5 7.5 0.15 0.3 0.4 0.15 105 1000 1000 1000 1000 1000 1000 1000 1000 1000 100 100 100 400 1000 300 300 300 700 400 600 2000 2000 700 3.6 × 10 3.6 × 105 5.2 × 105 3.7 × 105 1.8 × 105 1.8 × 105 5.2 × 105 4.2 × 105 2.5 × 105 7.5 × 106 7.5 × 106 5.8 × 106 5.7 × 106 3 × 106 4 × 106 6.7 × 106 4 × 106 3.5 × 106 K J J MM L H

13 mm Dia. SIDE-ON COMPACT TYPE PHOTOMULTIPLIER TUBE SERIES Figure 9: Dimensional Outline and Basing Diagram (Unit: mm) TPMSA0034EB TACCA0181EB PHOTO- CATHODE 4 MIN. 13.5 ± 0.8 13 MIN. 24.0 ± 1.5 40 ± 2 50 MAX. 3 ± 2 UV WINDOW 4 MIN. 13.5 ± 0.8 13 MIN. 24.0 ± 1.5 42 ± 2 52 MAX. 7 ± 2 FUSED SILICA WINDOW PHOTO- CATHODE BOTTOM VIEW 6 87 KDY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 P DIRECTION OF LIGHT Outline No.1 Outline No.2 Socket E678-11U TACCA0161EB E678-11T (Sold Separately): For direct soldering to PC board 5.5 0.5 10.54 12.4 5.5 10.5 30° 12.4 2.7 30.5 DIRECTION OF LIGHT

Dimensional Outline and Circuit Diagram (Unit: mm) E850-13 Mounting Flange for E850-13 36.0 ± 0.3 2.5 15.0 ± 0.3 20 R112- 3.2 R15 E850-22: with SHV, BNC connector NOTE: A Measured with the maximum supply voltage. B Measured with a supply voltage of 1000 V. C The current at which the output linearity is kept within ±5 %. D Operating temperature range is -20 °C to +50 °C. E Supplied with a separate mounting flange. See below for assembled dimensions. Type No. E850-13E Anode / – 1250 1500 1 × 10-10 3.3 18 (at 1250 V) DC/Pulse0.38 Grounded Electrode / Supply Voltage Polarity Supply Voltage between Case and Pins Maximum Ratings (V) Supply Voltage between Power Supply Terminals (V) Voltage Divider Current (mA) Leakage Current in Signal Max. (A) Total Voltage Divider Resistance (MΩ) Maximum Linear Output in DC Mode Signal Output (µA) CBD A 14.0 ± 0.3 35.0 ± 0.5450 ± 10 R10 DY9 DY8 DY7 DY6 DY5 DY4 DY3 DY2 DY1 P K 0.5 MAX. R1 to R10 C1 to C3 : 330 kΩ : 10 nF 12.6 ± 0.5 12.4 ± 0.5 -HV AWG22 (VIOLET) SIGNAL GND SIGNAL OUTPUT RG-174/U (BLACK) POWER SUPPLY GND AWG22 (BLACK) SOCKET PIN No.PMT HOUSING (INSULATOR) POTTING COMPOUND