R593 HAMAMATSU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

New Electro-Optical Design Wide Effective Area, Low Noise Bialkali Photocathode 185 nm to 710 nm, 28 mm (1-1/8 Inch) Diameter, 9-stage, Side-on Type GENERAL Parameter Description/Value Unit 185 to 710 410 Low Noise Bialkali 10 × 24 UV glass Circular Cage Approx. 4 Approx. 6 11-pin base E678-11A (Sold Separately) E717-63 (Sold Separately) Approx. 45 -30 to +50 -30 to +50 Spectral Response Wavelength of Maximum Response Photocathode MateriaI Minimum Effective Area Window Material Dynode Structure Number of Stages Direct Interelectrode Capacitances Anode to Last Dynode Anode to All Other Electrodes Base SuitabIe Socket SuitabIe D Type Socket Assembly Weight Operating Ambient Temperature Storage Temperature nm nm mm pF pF g GNew Electro-Optical Design Structure GLow Noise GR4220 Wide Effective Area Type GSpectroscopy GBiomedical GEnvironmental Monitoring Figure 1: Typical Anode Uniformity TPMSB0122EB MAXIMUM RATINGS (Absolute Maximum Values) Parameter Value Supply Voltage Between Anode and Cathode Between Anode and Last Dynode Average Anode Current A 1250 250 0.1 V V mA Unit A: Averaged over any interval of 30 seconds maximum.NOTE The center of the R5983 photocathode is slightly laid out to the left side from guide key, light path should be adjusted by 2.5 mm to the left side from the guide key. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2002 Hamamatsu Photonics K.K. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. PHOTOMULTIPLIER TUBES R5983, R5983P

FEATURES

APPLICATIONS

RELATIVE SENSITIVITY (%) DISTANCE FROM GUIDE KEY (mm) 7 6 5 43 2 1 0 1 234 100 8 mm 2.5 ± 0.52.5 ± 0.5 10 MIN. CENTER OF PHOTOCATHODE SUPPLY VOLTAGE SPOT SIZE WAVELENGTH : 1000 V : 0.5 mm : 420 mm

PHOTOMULTIPLIER TUBE R5983, R5983P CHARACTERISTlCS (at 25 °C) NOTES Parameter Min. Typ. Typ. Max. R5983 for General Purpose R5983P for Photon Counting Cathode Sensitivity Anode Dark Current D Anode Dark Counts E Anode Sensitivity After 30 minute Storage in the Darkness 0.2 2.0 Anode Current Stability J The light source is a tungsten filament lamp operated at a distribution tem- perature of 2856 K. Supply voltage is 100 volts between the cathode and all other electrodes connected together as anode. The value is cathode output current when a blue filter(Corning CS 5-58 polished to 1/2 stock thickness) is interposed between the light source and the tube under the same condition as Note A. Measured with the same light source as Note A and with the anode-to- cathode supply voltage and voltage distribution ratio shown in Table 1 be- low. Measured with the same supply voltage and voltage distribution ratio as Note C after removal of light. Measured at the voltage producing the gain of 1 × 10 ENI is an indication of the photon-limited signal-to-noise ratio. It refers to the amount of light in watts to produce a signal-to-noise ratio of unity in the output of a photomultiplier tube. where q = Electronic charge (1.60 × 10 -19 coulomb). ldb = Anode dark current (after 30 minute storage) in amperes. G = Gain. ∆f = Bandwidth of the system in hertz. 1 hertz is used. S = Anode radiant sensitivity in amperes per watt at the wave- length of peak response. The rise time is the time for the output pulse to rise from 10 % to 90 % of the peak amplitude when the whole photocathode is illuminated by a delta function light pulse. The electron transit time is the interval between the arrival of delta function light pulse at the entrance window of the tube and the time when the anode output reaches the peak amplitude. In measurement, the whole pho- tocathode is illuminated. J: Hysteresis is temporary instability in anode current after light and voltage are applied. ENI = 2q.ldb.G. ∆f S Current Hysteresis Voltage Hysteresis 0.1 1.0 Radiant at 410 nm (Peak) 70 Blue Sensitivity Index (CS 5-58) B 8.0 Anode Pulse Rise Time G 2.2 Electron Transit Time H 22 Time Response Electrode K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 P Distribution Ratio 1 111111111 SuppIy Voltage : 1000 V dc K : Cathode, Dy : Dynode, P : Anode Quantum Efficiency at 320 nm (Peak) Gain C ENI (Equivalent Noise Input) F Unit Luminous A Radiant at 410 nm 7.0 × 105 Luminous C 1000500 3.6 × 10-17 Min. Max. nA 0.1 1.0 70 mA/W 8.0 2.2 ns ns 7.0 × 105 A/W

1000 A/lm500

1 × 107 1 × 107 10 50 s -1 3.6 × 10-17 W Table 1: Voltage Distribution Ratio Hysteresis = × 100 (%)lmax. – lmin. li (1)Current Hysteresis The tube is operated at 750 volts with an anode current of 1 micro-ampere for 5 minutes. The light is then removed from the tube for a minute. The tube is then re-illuminated by the previous light level for a minute to measure the variation. (2)Voltage Hysteresis The tube is operated at 300 volts with an anode current of 0.1 micro-ampere for 5 minutes. The light is then removed from the tube and the supply voltage is quickly increased to 800 volts. After a minute, the supply voltage is then reduced to the previous value and the tube is re-illuminated for a minute to measure the variation. TPMSB0002EA TIME max.l min.lil ANODE CURRENT 0 5 6 7 (minutes) 60 100 60 100 23 % µA/lm

PHOTOMULTIPLIER TUBE R5983, R5983P TPMS1057E02 JUL. 2002 IP Figure 7: Dimensional Outline and Basing Diagram (Unit: mm) Figure 8: Socket E678-11A (Sold Separately) Figure 9: D Type Socket Assembly E717-63 (Sold Separately) Warning–Personal Safety Hazards Electrical Shock –Operating voltages applied to this device present a shock hazard. Hamamatsu also provides C4900 series compact high voltage power supplies and C6270 series DP type socket assemblies which incorporate a DC to DC converter type high voltage power supply. TACCA0002EH TPMSA0035EB TACCA0064EA 28.5 ± 1.5 10 MIN. 2.5 ± 0.5 32.2 ± 0.5 24 MIN. 49.0 ± 2.5 80 MAX. 94 MAX. PHOTOCATHODE

11 PIN BASE

JEDEC No. B11-88 5 76 KDY1 DY2 DY3 DY4 DY5 DY6 DY7 DY8 DY9 P DIRECTION OF LIGHT 3.5 418 HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvä gen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it WEB SITE http://www.hamamatsu.com POTTING COMPOUND R1 to R10 C1 to C3 : 330 kΩ : 10 nF 3.5 33.0 ± 0.3 49.0 ± 0.3 38.0 ± 0.3 450 ± 10 31.0 ± 0.5 HOUSING (INSULATOR) R10 DY9 DY8 DY7 DY6 DY5 DY4 DY3 DY2 DY1 SIGNAL GND SIGNAL OUTPUT RG-174/U(BLACK) -HV AWG22 (VIOLET) P K POWER SUPPLY GND AWG22 (BLACK) SOCKET PIN No.PMT 30.0+0