R1307

R1307 HAMAMATSU | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

FEATURES

R1307, R1307-01 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. © 1998 Hamamatsu Photonics K.K. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. For Scintillation Counting, Especially for Gamma Camera 76mm (3 Inch) Diameter, 8 Stage, Head-on Type Bialkali Photocathode Photomultiplier Tubes Pulse Height Resolution with Stability Typ. Max. GENERAL Parameter Description/Value Unit Spectral Response Wavelength of Maximum Response Direct Interelectrode Capacitances (approx.) Window Dynode Operating Position Weight (approx.) Socket nm nm pF pF µm g 300 to 650 420 – 30 6.0 6.5 Borosilicate glass 1,500 – 0.001 Less than – 50 Plano-plano Box and grid Alkali-antimonide Any 190 E678-14A or equivalent Anode to Dynode No. 8 Anode to All Other Electrodes Material Index of Refraction at 420nm Face Plate Flatness Shape Structure Material of Secondary Emitting Surface MAXIMUM RATINGS (Absolute Maximum Values) CHARACTERISTICS (at 25 °C) Parameter Min. Unit Parameter Value Unit Supply Voltage Average Anode Current (Note 5) Average Cathode Current (Note 6) Ambient Temperature 1500 300 0.1 -80 to +50 (R1307-01) -30 to +50 (R1307) Vdc Vdc mA nA Between Anode and Cathode Between Anode and Dynode No. 8 Anode Luminous Sensitivity (Note 1, 7) Anode Blue Sensitivity (Note 1, 8) Cathode Luminous Sensitivity (Note 9) Cathode Blue Sensitivity (Note 10) Gain Anode Dark Current (Note 1, 11) Time Response Anode Pulse Rise Time (Note 1, 12) Electron Transit Time (Note 1, 13) 3.2 110 12.0 2.7 × 10 A/lm A/lm-blue µA/lm µA/lm-blue nA ns ns Typ. Max.

1: Voltage distribution ratio Supply voltage (Ebb) = 1000Vdc K: cathode, G: Focusing Electrode, Dy: Dynode, P: Anode 2. Scintillator is manufactured by Harshaw Chemical, (Type 12A12), and BICRON (Type 3R3), Nal (Tl), 3" diameter 3" thickness. 3. Drift for 1 hour after 10 minutes of initial warming up with 10µA anode current. 4. A 137Cs source and an Nal (Tl) crystal are employed to measure the pulse height. Warming up time is about 1 hour. a) Long term (Mean Gain Deviation) is defined as follows. where P is the mean pulse height averaged over n readings, Pi is the pulse height at the i-th reading, and n is the total number of readings. b) Short term Scintillator (Nal (Tl) crystal) is 3" diameter 3" thickness. The photomul- tiplier is first operated at about 10,000 cps. The photopeak counting is then decreased to approximately 1,000 cps by increasing the dis- tance between source and crystal on the tube. 5. Averaged over any interval of 30 seconds maximum. 6. Same as Note 5 and the whole photocathode is illuminated. 7. The light source is a tungsten filament lamp operated at a distribution temperature of 2856K. The light input of 10 -7 lumen is used. 8. The value is anode output current when the blue filter (Corning CS 5-58 polished to 1/2 stock thickness) is interposed between the light source (providing 10 -7 lumen) and the tube under the same condition as Note 7. 9. The condition is the same shown in Note 7 except that the value of light input is 10-4 limen and 150 volts are applied between cathode and all oth- er electrodes connected together as anode. 10. These values are cathode output current when the blue filter (Corning CS 5-58 polished to 1/2 stock thickness) is interposed between the light source (providing 10 -4 lumen) and the tube under the same condition as Note 9. 11. Measured after 5-second strage in the dark. 12. The rise time is the time for the output pulse to rise from 10% to 90% of the peak output when the tube is illuminated by a flash of light of very short duration. In measurement, the whole photocathode is illuminated. 13. The electron transit time is the interval between the arrival of delta func- tion light pulse at the entrance window of the tube and the time when the output pulse at the anode terminal reaches peak amplitude. 14. m is the mean value of total counts, i.e. Test conditions: Incident light wavelength is 400nm. Supply voltage is +1300V. Ambient temperature is 20°C. Electrodes Distribution Ratio K Dy1G Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 111 P Figure 5: Typical Temperature Coefficient of Anode Sensitivity (-20 to +60°C, Note 1) TPMHB0527EA 200 300 400 500 600 700 -1.0 +2.0 WAVELENGTH (nm) TEMPERATURE COEFFICIENT (%/ °C) +1.0 Dg = . (%) n i = 1Σ P - Pi 100 Pn Σ (counts per channel) = Σ (counts per channel) m 0.3m m

Figure 6: Dimensional Outlines (Unit: mm) TPMH1214E01 AUG. 1998 HAMAMATSU PHOTONICS K.K., Electoron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: (44)181-367-3560, Fax: (44)181-367-6384 North Europe: Hamamatsu Photonics Norden AB: Färögatan 7, S-164-40 Kista Sweden, Telephone: (46)8-703-29-50, Fax: (46)8-750-58-95 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 TACCA0044EB TPMHA0433EA TPMHA0078EA PHOTOMULTIPLIER TUBES R1307, R1307-01 Warning - Personal Safety Hazards Electrical Shock — Operating voltage applied to this device presents shock hazard. 19.8 172 6 7 8 9 DY1 DY2 IC DY4 DY5 DY6 DY7 DY8 IC IC P DY3 G K 76.0 – 0.8 70MIN. 127 – 3 150MAX. 56.5 – 0.5 51.5 – 1.5 FACEPLATE PHOTO- CATHODE

14 PIN BASE

No. B14-38 8 9 10 11 DY1 DY2 DY4 DY5 DY6 DY7 DY8 NC NC P DY3 G K 76.0 – 0.8 70MIN. 110 – 1.568MIN. 13MAX. 56.5 – 0.5 51.5 – 1.5 FACEPLATE PHOTO- CATHODE 1.0 SEMIFLEXIBLE LEADS Basing Diagram (Bottom View at Semiflexible Leads) *Basing diagram of temporary base is the same as that of R1307. R1307 R1307-01 Socket (OPTION) (E678-14A)